Pressure Pump Dealers in Kng Pudur, Coimbatore

• Motor power: 0.5hp to 2hp
• Speed: 2900 RPM
• Power source: AC Single phase 230 Volts 50Hz  AC Three Phase 415 Volts, 50Hz(1hp to 30hp)
• Type of duty: S₁ (Continuous)
• Winding type: Wet type (rewindable)
• Pump Type: Centrifugal Mono shaft construction
• Maximum Head: 32 mts
• Maximum Discharge: 580 LPM

Suitable for domestic, Small farms, commercial buildings etc. Made with Stainless steel Body and single stage Horizontal end suction type pump makes the pump simple, cost effective and gives maximum efficiency.   APPLICATION Domestic water pumping from sumps and open wells Small hotels & restaurants Garden watering Small industrial water supply Other applications where water requirement is around 50 to 500 LPM No suction pipe, foot valve required No priming problem More power savings FEATURES Full Stainless steel Body Back pull out design for easy service without disturbing pipe line Graphite carbon bearing for long life High efficiency No suction and priming problems No space or pump room required Noise less operation Easy to install, dismantle and service SPECIFICATIONS

• Name: RMP COMPRESSORS

• Voltage: 240 V
• Model Name/Number: SCALA 2
• Usage/Application: Domestic
• Pump Type: Water Pressure Boosting Pump
• Brand: Grundfos
• Power Source: Electric
• Automation Grade: Automatic
• Maximum Head Size: 47 m
• Phases: 1 Phase
• Power Input: 550 W
• Rated Current: 2.8 A
• Gross Weight: 12.2 kg
• Density: 998.2 kg per m cube
• Max Flow: 5 m3/h
• Maximum Operating Pressure: 10 bar
• Liquid Temperature: 45 to 55 Degree Celsius

MOTOR: The Motor is squirrel cage induction motor, totally enclosed and water filled. It is designed for 220v +6% - 30% for single phase and 415v + 6% - 15% for three phase 50 cycles AC supply with a speed of 2760 RPM. Body is made of heavy duty stainless steel pipe. High quality water resistant polymer insulated wires are used for longer life. Stainless steel rotor shaft with good quality laminations, epoxy coated and baked for rust prevention. Thrust bearings are of special design and special lead-tin bronze are used for high wear resistance. The winding and bearing bushes are cooled and lubricated by pure water, filled in the motor before installation. The motor is protected from well water, sand and foreign materials.   PUMP: The impellers are glass filled poly - carbonate/GFN2 Material for high wear resistance, impellers are dynamically balanced individually and also after assembly on shaft. Bearing bushes are used for high wear resistance and longer life. A strainer is provided at inlet to prevent foreign materials getting into the pump. A non-return valve is provided to prevent back-flow of water.   Special Features     Ingenious hydraulic design ensures better efficiencies over a wide range of heads and discharges, varying between 60% and 140% of duty points. This means high energy saving even at a wide variation of water level in the bores. Because of special cooling arrangement in the motor, the winding temperature raise is kept to the minimum, even at extreme voltage fluctuations. Unique design of bearings and thrust bearings increases the efficiency. Special Care is taken during stator winding, to withstand field Conditions. Intermittent bearings result in lowest vibration and wear. This ensures longer life of the pump. Maximum outside Diameter is 94mm only. Easy for installation even in crooked bores of 100mm size(4").     Standard Features Most modern and latest in design. All the units are thoroughly tested for field conditions. Superior design materials & manufacturing processes  assure a longer life. Easy installation. High Efficiencies - better than International values, leading to energy saving. Silent, Vibration- free running. The components are made of selective materials under strict quality control. Quality Assurance by ISO 9001 certified company. Effective After - sales service.     Applications     Rural and Urban Drinking Water Installations. Water Supplies for High Raise Buildings. Lawn & Garden Watering. Water circulating systems. Agricultural - Lift, Sprinkler and Drip Irrigation. Industrial Service Water Supply Schemes.                

• Power Input Range: 0.37 kW to 1.5 kW
• Power supply: Single phase 230 V, 50 Hz AC supply
• Motor: Capacitor run motor, TEFC type
• Speed: 2900 RPM
• Degree of Protection: IP 54
• Class of Insulation: ‘F’ Class
• Flow rate: upto 7.5 m3/hr
• Head: upto 72 m
• Liquid temperature: Maximum 55º C
• Suction lift: Maximum 7 m
• Operating pressure: Maximum 7 Bar

• Delivery Size: DN 200 to 400 mm
• Capacity: Up to 1520m³/hr
• Head: Up to 58 m
• ParticleHandling Size: Upto 220 mm

Our Centrifugal sand dredging pumps are designed for continuously handing high abrasive slurry which contain big solid particles. They are suitable for delivering slurry in mining, explosive sludge in metal melting, dredging in dredger and course of rivers. These pumps are especially suitable for the high flow, high concentration and high head working condition, for slurry transportation.

• Application: Industrial
• Brand Name: Lanshan Motor
• Pressure: 90psi
• Material: Stainless Steel
• Model Name/Number: LS-ZY-50B
• Pump Type: Booster

We are engaged in manufacturing, exporting and supplying Vertical Multistage Pumps that are made from quality material. The Vertical Multistage Pumps we provide are demanded by the clients for their efficient performance. We offer a wide variety of Vertical Multistage Pumps that tune in to various requirements of the clients. Attributes Totally enclosed fan cooled motorsSuitable for 340-440V Three Phase 50Hz power supplyDynamically balanced rotorsVibration free and noiseless operationHeavy ball bearing to take higher thrust loadLong working lifeMaintenance freeHigh strength Brand AQUATEX Used In High pressure applications Specifications Power3.0 & 20.0 HPSpeed2900 RPMHead Max.258 MDischarge Max60 m3/hr LPM

Vertical Multistage Pump, Horizontal stage pump, Submersible Sewage Pump

three plunger pump, Washing Jack

pressure boosting systems, Borewell Submersible, Electric Motors