Relays Dealers in Coimbatore

Since our strict packaging guidelines, we make sure that the products are suitably packed assuring zero damage during transportation. Furthermore, our packaging professionals thoroughly check the whole batch before making the final transmit. In order to meet ever-evolving requirements of the clients, we have installed a capacious storage facility. This unit helps us in keeping stock of products in different grades and specifications.Features : Monitors incoming pulses from external NPN Sensor Adjustable Time delay setting with Seconds/Minutes Range Latch facility (requires external N/C contact or switch Built-in "Reset" Button 1 x SPDT Relay Output LED indication for supply DIN Rail Housing LED indication for Relay status during Alarm Delay Time Initialization and Settings : Before Installation, Isolate the Supply. Connect the unit as shown in the diagram below. Connect the proximity switch to the 0V™, 24V™ and O/P™ terminals. . If using an external contact, connect between 0V™ and O/P™ terminals.. Set the range™ switch to seconds/minutes™. Set the delay™ adjustment to desired level. In latching mode, connect the Y and M1 terminals. Operation : Apply power between the terminals A1 and A2. The power™ green LED illuminates and the unit warms up for 800ms.The speed of the motor is received through the sensor. When the speed is above the threshold level, the relay is energized. Once the speed goes below the threshold level, the red 'relay' LED blinks till the alarm delay time is reached and then the relay will be de-energized. During the alarm monitoring delay time if the speed reaches the threshold, the LED stops blinking and the unit goes back to normal operation. Reset : In non-latching mode, the unit is reset automatically once it receives pulse from the sensor. In latching mode, the unit is reset only when the RESET key is pressed.

• Driven Type: Electric
• Phase: Single Phase

single phase preventer for electrical protection application

Maximum i/o 82 (50 i/p-32 0/p) Removable lcd display (act as hmi) AC 100-240 v/dc 12-24 v O/P current-relayl 10a,transister 2a timer/counter 128nos,rtc 128nos Industrial wireless remote control-6 up Voice module,auto dialing alarming Friendly programming software 8 Analog inputs

• Material: ALUMINIUM
• Shape: SQUARE
• Country of Origin: Made in India
• Brand Name: UNISON
• Size (Inches): 35MM
• Current: 100-280 VAC
• Voltage Type: DC
• Operating Temp.: 40 DEGREE
• I Deal In: New Only

• Application: Electronic Use

• Brand: Salzer
• Model Name/Number: SC040
• Rated Operating Frequency: 25
• Rated Coil Frequency: AC: 50Hz,60Hz,50/60Hz and DC
• Rated Insulation Voltage: 1000 V

• Functions: Phase sequence,phase failure,imbalance (asymmetry),over and undervoltage in window mode
• Nominal Voltage: 3 x 208 -3 x 480 V AC
• Outputs: 1 single pole changeover relay
• Min Breaking Current: 10 mA / 5 V DC
• Mounting: On 35 mm symmetrical DIN rail,IEC/EN 60715
• Weight: 80 g

• Type: TIMER
• Brand Name: OSMIUM

Delay timer in this dry run prevented suitable to all type of agriculture motors and starters (specially for 3 phase star delta & 1+3 star delta) features: suitable 12 hp to 50 hp motors it is used to give the delay signal it contains normally closed it also contains normally open.

• Number of Poles: 4 Pole
• Voltage (V): 110v
• Application: Over Voltage, Under Voltage and Neutral Displacement Protection
• Voltage Type: AC

Volume Booster is used to when the piping distance is long from the instrumentation control room to the actual working area of the actuator. To boost the actuator speed considerably. It helps in high cost reduction in the form of reduced air loss due to less working of the compressor with our compromising on the working of the actuator. Technical Specification: Max. Supply Pressure : 9 Kg/cm2 Max. Signal Pressure : 7 Kg/cm2 Max. Output Pressure : 7 Kg/cm2Connection : NPT ¼/ NPT 3/8 Air Flow (l/min) : 600Air Consumption (l/min) : 3Linearity : +or-1%Hysteresis : +or-1%Pressure Ratio : 1 : 1Material : Al Die Cast   Application: All compressed air piping installations, in Damper Actuators before the positioner to increase the flow of air to the actuators. Ideal for Control Valve , Power cylinders.            

• Application: INDUSTRIAL FUSE
• Current Rating: 125Amps
• Fuse Type: DIN

• Voltage: 415 V AC
• Usage/Application: Submersible Pump, Compressor
• Model Name/Number: Auto start Unit Z Series
• Brand Name: MAG
• Phase: Single Phase
• Current: 30 Amps

Feautures : Top Tank Level Controller Sump Tank Level Controller Delay On Timer Recommended Load Upto 25A Suitable for : All Three Phase Pump Starter Single Phase Mono Block Pumps Single Phase Open Well Pumps Single Phase Jet Pumps Single Phase Compressor Single Phase Submersible Pump

1.Protect motor from two phase running 2.Time delay(24 secs) with auto start 3.Auto/manual mode operation with easy selection 4.Automatically switch off the motor when any one of the phase lost. 5.It is used for pump motors.

• Type: Earth Leakage Relay
• Country of Origin: Made in India
• Usage/Application: Leakage Current Monitoring in 3Phase & 1phase Systems
• Model Name/Number: 900ELR
• Brand: SELEC
• Contact Form: 2 X 1 C / O (SPDT)
• Display: 3 Digits Liquid Crystal Display With Backlight.
• Ce Certified: Yes
• Activation Time: Power ON Delay: 0.5-99.9sec, Trip Time Delay: 0-99.9sec, Recovery Time Delay: 0-99.9sec

FASTER SWITCHING SPEED 1000000 TIME SWITCHING CYCLE 24V DC SSR RELAY SILENT SWITCHING OPERATION INCREASED LIFE TIME NO SPARKING WHILE SWITCHING RELIABLE OUTPUT SMALLER THAN MECHANICAL RELAY  lxl, 2x1, 4x1, 8x1, 16x1, 1x2,2x2,4x2, 8x2 RELAY MODULE TYPES AVAILABLE

• Feature: High strength, Reliable performance, Long working life

• Voltage: 220V
• Usage/Application: Control Panel
• Type: Undervoltage relay
• Model Name/Number: 3PFMR-S2
• Current: AC

These monitoring modules have been developed for special applications. Areas of application range from the monitoring of tactile and optoelectronic safety equipment to that of twin valves on press control systems.

• Frequency: 50 -60 Hz
• Model Number: SRB324ST 24V (V.3)
• Permanent Light: SRB324ST
• Climatic Stress: EN 60068-2-78
• Housings Material: Plastic,Glass-fibre Reinforced Thermoplastic,Ventilated

We are offering electric relays. Head lamp relay - 12v head lamp relay - 24v application all four wheelers ashok leyland hcvs tata hcvs

• Features: Elegant design ,Less energy consumption ,Resistance to heat.

• Type: Preventers
• Material: Plastic
• Weight: <1Kg
• Brand Name: GMaK
• Voltage: 415
• Frequency: 50Hz

By keeping track of the latest development, we are offering a wide array of Three Phase Preventer. These preventers are manufactured by making use of excellent quality material in adherence to set industrial norms. Also, our preventers prevented suitable to all type of agriculture motors and starters. Customers can avail these preventers at most affordable prices from us.Features: Minimum and maximum current rating is changeable Sensing voltage Protect from phase reversal Specifications: Suitable 1/2 hp to 50 hp motors Minimum and maximum current rating is changeable Sensing voltage Protect from phase reversal Protect from under voltage Protect from unbalance voltage Protect from phase failure In cyclic Timer ON OFF time is changeable   Mail to gmaktechnocraft@gmail.com for enquiry

Accurate timecurrent characteristic curve obtained in this manner guarantee reliable motor protection every time Tripping characteristic of the relay remain constant over an ambient temperature range of -25°C to +50°C CT thermal overload relay feature a fail – safe “trip – free” design Consistent & reliable protection Selectable manual Automatic mode Phase failure protection Individual mounting with socket Direct mounting with contactor Outstanding reliability as a result of simple, ingenious design Trip class 10

Intro We offer our clients standard contractors, mini contractors, control relays and bimetallic overload relays. The contractors and relays are safe and easy to install. Detailed Description   Overload relays control and protects electric motors. They prevent short circuit and prevent overload from occurring. When a relay is used to switch a large amount of electrical power through its contacts, it is given the name contractor. Contractors typically have multiple contacts. Along with the contractors, we also offer auxiliary contacts, PCB link modules, electronic timers, mechanical interlocks, wiring modules and surge compressors. Specifications 01 Standard Contactors 4 Frames 9A to 105 Amps Reversing, Non Reversing 02 Accessories: Front & Side Mounted Auxiliary Contact, Wiring Modules Interlocks, Surge Suppressors 03 Mini Contactor: 7A to 16 Amps, Control relays - 16 Amps 04 Accessories: Auxiliary Contact, PCB Link Module, Electronic Timer, Mechanical / Electrical Interlocks, Wiring Module, Surge Suppressor etc. 05 Bimetallic Over Load Relay 5 Frames from 0.28-112 Amps

      NHP offers a range of control relays and timers that can be used in conjunction with a conventional automation system to switch higher loads or in stand alone applications where the only basic single function control is required.

I n this Dry run prevented suitable to all type of agriculture motors and starters(specially for 3 phase star delta & 1+3 star delta) Features: . Suitable 12 hp to 50 hp motors, . Minimum and maximum current rating is changeable, . It is used to give the delay signal. Types of delay timer: . 1-24 sec delay timer . 1-15 sec delay timer . 01 sec-12 hrs delay timer . 12V(230V) delay timer

• Frequency: 50Hz
• Country of Origin: Made in India
• Material: MS
• Output Voltage: 440 V
• Current: 100 A
• Meter Type: Analog