Rs232 Converter Dealers

• Shell: IRON

We are leading in manufacturing and supplier of RS485 to USB Converters in Chennai,Tamilnadu,India.TLC422 is the interface converter between RS-232 and RS-422. It is powered from serial port (such as COM port of computer ), no outside power needed. Small size, long transmission distance, high rate, stable performance. It applys DB9 common serial port. It is used widely in the field of electricity, industrial automatic control, IC card billing system. It is a high quality low price data interface conversion product. Features1. Port-powered from RS-232 port (TXD,RTS,DTR): no external power is necessary    2. Convert RS-232(TXD,RXD signal) to RS-422 signal    3. Plug-and-Play (hot-pluggable, Data format Auto-sensing & Self-adjusting)    4. Data direction auto-turnaround, no flow control is required    5. Point to multi point, support 128 nodes loopback Specification Standards: EIA RS-232C, RS-422 standardRS-232 signal: TX, RX, GNDRS-422 signal: T+, T-,R+,R-, GNDWorking mode: Asynchronism, point to point, 4 wire full-duplexTransfer rate: 300~115200bps, auto test serial signal rate detect signal speed automatically, zero delay timeFlow control: Data direction auto-turnaround, no flow control is requiredMax number of drops: 128 nodesTransfer distance: RS-422 side: 1.2KmRS-232 side: no less than 5mPort protect: 1500W surge protection,15KV ESD protectionConnector: RS-232 side DB9 femaleRS-422 side DB9M( DB9F to 5 bit terminal block) PowerPower input: No power supply need, powered from RS-232 port TXD, RTS, DTRConsumption: Static less than 10mA, dynamic less than 40mAEnvironmentOperating temperature: -20°C to 60°C Storage temperature: -40°C to 85°CHumidity: 5% to 95%(no condensation)AppearanceDimensions: 90.0mm×33.0mm×16.5mm(DB9)Material: Plastic(shell) Weight: 40gWarranty: 3 yearsApprovals: FCC, CE, RoHS approvals

• Color: Grey
• Usage: CAN Bus Sniffing, Protocol Conversion, CAN Bus Monitoring
• CAN Channel Baud Rate: up to 1 Mbits/Sec
• UART Baud Rate: up to 115200
• CAN Versions: CAN 2.0A & CAN 2.0B
• GUI: Free Windows based Configuration GUI

vCAN-RS232/RS485 is a configurable module to convert data between RS232/RS485 and CAN protocols formats. Using this module the data from the CAN network or device can be routed to RS232/RS485 device example a PC and vice versa. So this eliminates the need for any extra drivers. These device settings can be configured through an easy-to-use free GUI-based utility.

ransmits the Squirrel data logger's RS232 output wirelessly to a PC running SquirrelView Maximum range is 500m using an external antenna (100m as standard) Baud rates of up to 116 K; 2.4GHz frequency Plug and play configuration and via the in-built communications wizard in SquirrelView Low power consumption

• Country of Origin: China
• Certification: CE Certified
• Condition: New
• Warranty: 1yrs

• Price: Rs. 120

Being a quality-conscious firm, we make sure that the offered lot is prepared using the world-class raw material and modern work methods. Also, we source it from the certified vendors. The clients can stay assured with us for their transactions, as our payment methods are quite safe and reliable.

• Brand Name: ATC
• Condition: New
• Feature: Durable, High Performance, Stable Performance
• Type: Usb Converter
• Line Speed (bps): 300bps to 1Mbps
• Current: 15mA
• Communication Indicator Type: LEDs for Power,TX and RX

RS485 to RS232 Converter converts RS485 signal to the RS232 signal, used for communication between the measuring instruments with RS485 op & PLC SCADA Energy Management System with RS232 input.

• Brand Name: 3Onedata

MODEL485P is a RS-232 to RS-485/422 interface converter that can achieve bidirectional conversion between RS-232 and RS-485/422. It provides 1 RS-232 serial port and 1 RS-485/422 serial port. The RS-485/422 supports serial port self-adaption technology that can identify RS-485/422 serial port automatically without the need of setting the switch. Serial ports are equipped with 1500W surge protection, 15kV electrostatic protection and 2500V photoelectric isolation protection, which can effectively avoid surge and lightning strike. The device also adopts wall mounting, which can meet the requirements of different scenes.   Hardware adopts fanless, low power consumption, wide temperature and voltage design. It can be wildly used in indoor and outdoor system like attendance, entrance guard, cloud platform control, food selling and parking lot, etc.

• Type: Rs232 Converter
• Material: FRP
• Weight: Vary as per size
• Color: Standard
• Condition: New
• Bandwidth: Vary as per model
• Rating: 300bps To 921600Kbps
• No. Of Ports: Double

Sends the data from any RS232 (tool, weighing machine, gauge, etc) to PC EXCEL Two Modes:A. Cable InterfaceB. Wireless/Bluetooth Interface

• Country of Origin: INDIA
• Brand: SANDS

RS232 to RS485 converter provide conversion between serial networks and other media. They can transparently convert RS232 signals to RS485 signals and vice versa without changing the PC’s hardware or software. The serial media converter lets you easily build an industrial grade, long distance communication system with standard PC hardware. It comes with a built-in 120Ω terminator for system reliability and easy installation.

• Power: 2500 V

Milestone's "RS232C to RS485RS422 Converters" are designed for high speed data transmission between computer system and or peripherals over long distance under noisy conditions. It provides opto isolation (2500 V) against erroneous glitches, spike suppression and short circuit protection on each transmission line. They provide dual line differential per signal. Various models are available. All the models support upto a distance of 1.5 kms. All models have LED indication for Tx, Rx and PWR line.

It has compatibility with wide variety of devices running on different operating systems. With high reliability and noise resistant operation, the DTS232 is not the cheap, run off the mill USB to RS232 converters available in the market. It has built-in ESD protection and also have noise resistant operation

• Type: Rs232 Converter
• Material: Aluminium, FRP, Plastic
• Weight: 0-200 Gm, 200-400 Gm
• Color: Black, Blue, Green, Silver, White
• Condition: New, Used
• Operating Temperature: -30 °C
• Warranty: 1 Yr
• Power Consumption: 0-3 W, 3-5 W.
• Rating: 300bps To 921600Kbps
• Repeater Request: 0-2000 Feet, 2000-4000 Feet
• No. Of Ports: Double, Single

• Warranty: 1 YEAR
• Color: GREY
• Approval: CE, Fcc
• Brand Name: ATC
• Model Name/Number: ATC-155

• Storage Temperature: -30
• Dimension: 72mm x 118mm x 33mm (W x L x H)
• Brand Name: Adaptek Automation
• Model Number: RS232
• Power Input: 230 V AC
• Optical Isolation: 1.5 V

• Brand Name: KSH - Taiwan
• Model Number: U-101
• Place of Origin: Tamil Nadu, India
• Products Status: Stock

• Warranty: 1 year
• Weight: 250 grm
• Brand Name: ATC
• Minimum Order Quantity: 1 Piece

• Weight: < 50 g
• Bezel size: 48 mm x 24 mm

The unit is a port powered two-channel (half-duplex) RS-485 to RS-232 converter. It converts the balanced halfduplex RS-485 signals to TD and RD RS-232 lines. The unit is powered from the RS-232 data and handshake lines whether the lines are high or low. An external power supply can be connected to two terminals on the RS-485 connector if no handshake lines are available. Although the converter uses handshake lines to power itself, no handshaking is required to control the RS-485 driver. The RS-485 driver is automatically enabled during each spacing state on the RS-232 side. During the marking or idle state, the RS-485 driver is disabled and the data lines are held in the marking state by the 4.7k ohm pull-up and pull-down resistors. The value of these resistors may need to be changed to a different value when termination is used in order to maintain the proper DC bias during the idle state.

Ztech’s digit RS232 to RS485 converter is designed to offer a truly simple, cost effective digital pressure gauge to cover a wide range of applications from calibration laboratory to in-field use. It indicates pressure with different selectable units by user with the resolution of maximum 6 digits in battery operated version. It has auto power OFF function in battery operated model. It has other model in which it can be used as loop power indicator with 4- 20mAdc transmitter by giving 15 to 24Vdc external supply voltage. In this version it will give you resolution of four digits with selectable multiplying factor for different unit scales with red LED display. It is operated by high precision piezoresistive silicon sensor technology. It is available in two different applications for air, gases (dry) media other model is for air & liquid with SS316 diaphragm. Features: Accuracy: 0.05% FS 0.1%FS 0.2%FS Display Display: Monochrome LCD for battery power Red LED for external power supply. Units: PSI, Pa, mbar, bar, hPa, kPa, Mpa, Kgcm2, mmHg Operating & Compensated: 32°F to 122°F ( 0°C to 50°C) Storage: -40°F to 167°F ( -40°C to 75°C)6 Process Connection: 0.5” NP2T (M) standard, other on demand Diaphragm: 316L stainless steel. (for liquid application) Battery life: 2000hrs. Low battery Indicator: YES Output: 4- 20mAdc (in external power option) Output Loading: Max 600 Ohms loading capacity Com port: RS232 RS485 Modbus RTU or GSM connectivity Power: Battery or 24Vdc external Humidity: