Sensor Transmitter Dealers

• Model Number: DE-44 Ex
• Brand Name: Fischer

Working Principle: -Fischer DE44 Ex is based on dual piezo-resistive sensing element. The pressure is measured directly by piezo-resistive resistance bridge that is formed on surface of an integral silicon diaphragm in each sensor chamber. Key Features: 1.Two independent differential pressure sensors 2.Robust design, over-pressure protected 3.Selectable pressure unit 4.Signal output with possibility of spreading and inverting 5.characteristic curve with any offset (optional) 6.Characteristic conversion of output via 3….30 entries tablets) 7.Fully programmable via PC based EU03 module 8.Large LED Display Key Specifications: 1.Two independent differential pressure sensor. 2.Measuring range (of each sensor): 0 ~ 4.0 mbar up to 0 ~ 100 mbar; ± 2.5 mbar to ± 60.0 mbar 3.Maximum static operating pressure: 50 mbar to 500 mbar 4.Maximum safe pressure: 150 mbar to 1500 mbar 5.Straight line deviation error (max): 1.0% full scale 6.Pressure connection: G 18 female threads with optional cutting ring fittings for 6 or 8 mm tube 7.Operating ambient & media temperature: -10° C to +70° C 8.Protection class: IP65 per DIN EN 60529 9.Electrical output: 4-20mA or 0-10V, 3 – wire 10.Power supply: 24 V DC AC 11.Switching contacts: 2 sets of programmable voltage free contacts: NO or NC 13.Display: 3 12 digit LED 14.Electrical connections: two round shell multi-pin connector sockets (M12, male) 15.Material, housing: Polyamide PA 6.6 16.Materials, media contact: Silicon, PVC, aluminum, brass Application areas: 1.Roll band filter monitoring 2.Vacuum system monitoring 3.Chimney draught measurement 4.Flow and control pressure monitoring 5.Surface coating system 6.Pump monitoring and control 7.Compressor monitoring and control

• Type: Vibration Transmitters
• Certification: ISO 9001:2008 Certified
• Weight: 0-2 Kg
• Voltage: 12-24 VDC
• Condition: New
• Driven Type: Electric
• Resolution: 0-5 Mm
• Automation Grade: Automatic
• Brand Name: Yakoon

Vibration Transmitter YKFB-YB40 ZMFB-YB40 is a vibration transmitter used for real-time monitoring of vibration of rotating machinery bearing, also known as integrated vibration sensor, with explosion-proof structure. It is a kind of absolute vibration measurement of the machine, which can be installed on the bearing seat or housing of the machine to monitor the machine in real time. At the same time, the two-wire system outputs 4-20 mA current signal, which can be directly supplied to PLC or DCS and other control systems in the control room. If there is a machine fault caused by bearing wear, bearing cracking, poor dynamic balance and no medium factors, the integrated vibration transmitter can detect the fault in advance and send an alarm to prevent the machine from continuing to work under bad conditions and damage. This type of integrated vibration transmitter is a vibration transmitter integrating vibration sensor and signal regulating circuit, which can directly transform the vibration signal collected in the field into 4 ~ 20mA current signal output. The output signal can be directly transmitted to PLC, DCS monitor, collector, recorder or other monitoring equipment.    Technical Specs:   Input: DC12v-dc28v (power supply by two-wire loop)  Measuring range: 0 ~ 10/20*/50/100mm/s (range optional: vibration velocity value/vibration intensity) Default range: 0-20mm/s Or 0 ~ 100/200 * / 500/1000um (Range optional: vibration displacement/vibration amplitude) Default range: 0-200 microns  Output: 4 ~ 20mA (or 1-5v / 2-10v)  Output Impedance:

Features : HVAC equipments Humidifier, Dehumidifier Green House, Ware House Server Room, Data Centre, Textile Pharma Labs, Stability Chamber

• Material: Mild Steel
• Color: Black,black
• Application: Boiler Plate
• Type: Stainless Steel 410s
• Country of Origin: India
• Warranty: 1 year
• Brand: vatukar
• Brand Name: VATTSMETER,vatukar
• Finishing: Polished
• Length: 1-1000mm
• Grade: SS410s
• Pattern: Plain
• Thickness: 1-5mm

E+e transmitter series ee36 are specially designed for the measurement of water content in oil. They are certified in accordance with the regulations of the "germanischen lloyd (gl)" and therefore can be utilized in the maritime field as well. The series ee36 is ideal for online monitoring of moisture in lubrication or insulation oil, which is very important for the long-term performance and adaptive maintenance of plant and machinery. For instance, moisture affects dramatically the insulation characteristics of electrical transformer oil and therefore continuous monitoring is extremely important. click here for more information

• Weight: 2-4 Kg
• Brand Name: Dexcom G6
• Driven Type: Electric
• Condition: New
• Automation Grade: Automatic
• Certification: CE Certified
• Voltage: 6-12 VDC
• Resolution: 5-10 Mm
•  Type: Laser Transmitter
•  Battery: 12-24 VDC
•  Temperature: 40-80 Deg C

• Type: Automatic
• Weight: 0-100 Gm, 100-200 Gm
• Accuracy: +/-2%.
• Enclosure: ABS
• Humidity: 95% RH
• Linearity: 0.02% FS
• Measuring Range: 0-10 Ppm
• output signal: 0-5 MA
• Temperature: -40- +20 Deg C

Due to our unequaled and effectual method of delivery, we have ascended as talented supplier in the marketplaces of Kolkata(India) We are reckoned as the noted Supplier of Sensor Transmitter as we are capable of meeting the exact requirements of the buyers. Our avant-grade sensor transmitters are available with a quality warranty of 12 months against any manufacturing defect. 

• Country of Origin: China
• Certification: CE Certified
• Warranty: 1yr

Battery Power backup Room Quality Sensor transmitter, which can detect temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S.   Note: You can add or remove any parameters   Parameters   Power supply: DC 10-30V Maximum power consumption: 0.6W (24V DC power supply) Detection parameter: temperature, humidity, PM2.5, PM10, Illumination, Pressure, TVOC, CO2, O2, H2, H2S. Working environment: -10℃-55℃, 0~95%RH Signal output: WIFI or RS485 Product material: ABS Installation method: wall-mounted, ceiling-mounted   Datasheet - Air Quality Detector Detection parameters Range Resolution Accuracy Preheat time PM2.5 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min PM10 0~1000ug/m3 1ug/m3 ±3%FS(@100μg/m3,25℃,50%RH) ≤2min Temperature -40℃~+120℃ 0.1℃ ±0.5℃(25℃) — Humidity 0%RH-100%RH 0.1%RH ±3%RH (60%RH, 25℃) — Atmospheric pressure 0~120Kpa 0.1Kpa ±0.15Kpa@25℃101Kpa — Illumination 0~200000Lux 1Lux ±7%(25℃) — TVOC 0~60000ppb 1ppb 8%FS(@C2H6O,0.5ppm,25℃,50%RH) — Carbon dioxide 0~5000ppm 1ppm ±(50ppm+ 3%F·S) 2min O2 0~25%Vol 0.1%Vol ±2%FS ≥5 minutes H2S 0~100ppm 1ppm ±2ppm or ±10% ≥5 minutes H2 0~1000ppm 1ppm ±5%FS ≥5 minutes

• Benefits: Ultrasimple two-point calibration

pH/ORP transmitter Liquisys CPM253 Compact field device for all industries Liquisys CPM253 is a standard pH/ORP transmitter for all analog and digital Memosens sensors. It improves your operational safety thanks to continuous plausibility, process and sensor checks. Select from numerous hardware and software modules, such as relays or fieldbus communication, to adapt it exactly to your measuring task. This modularity also allows you to upgrade the transmitter at any time. A simple menu and two-point calibration make configuration and operation fast and easy. Benefits Ultrasimple two-point calibration Calibration plausibility check Automatic cleaning trigger on alarm or limit violation Sensor Check System for pH glass and reference 2nd current output for temperature, pH/ORP or continuous controller Field of application Effluent treatment Neutralization Detoxication (electroplating) Water treatment Water monitoring for more visit:instruments.world

  CO2 SENSE-xx series of ambient gas monitoring devices are low cost front ends needed for Industrial /commercial/ residential pollution monitoring and for Agriculture and food processing units for improved yields FEATURES: -NDIR ( Non-Dispersive-Infrared) technology used to measure CO2 concentration -Reliable Sensor provides long-term calibration stability. -LED Alarm indicators current Indoor Air Quality alerts (optional) -Wall Mount rugged enclosure with terminal block provided for quick / easy installation -24Vac/dc power supply APPLICATION:As Front end of Controllers of.. -Air Conditioned offices, shopping malls, Schools, Exhibitions Hallsrestaurants/pubs -Green houses, Mushrooms cultivation, Flower growers and nurseries -Food processing & Food storage, Breweries -Dairy ventilation requirements, Animal confinement , and restaurants/pubs etc.

• Output: 4 - 20 ma DC (2 wire) Ex. Voltage: 10 to 35 VDC
• Model: ROLINE - L
• Range: Temp.: 0 to +50 c+1 c Humidity: 0 to 100% Rh.+1.5% RH
• Probe Dia: 15mm* Length 86 mm IP 65 Output :0 to 1 VDC (4 wire)

we offer Humidity Sensor Transmitters. Humidity Sensor Transmitters We are amongst the renowned manufacturers and suppliers of high grade Humidity Sensor Transmitters. Our humidity sensor transmitters efficiently detect and transmit data using digital signals. This is fitted with superior quality processor which is able to detect varying low and high temperature and humidity. We provide humidity sensors transmitter which utilize moronic hygrometer capacitance sensor dew point and wet bulb temperature. We are amongst the renowned manufacturers and suppliers of high grade Humidity Sensor Transmitters. Our humidity sensor transmitters efficiently detect and transmit data using digital signals. This is fitted with superior quality processor which is able to detect varying low and high temperature and humidity. We provide humidity sensors transmitter which utilize moronic hygrometer capacitance sensor dew point and wet bulb temperature. Our humidity sensor provides accurate with long term stability results. This can be easily ducted and wall mounted in strategic places desired. This humidity sensor has great capacity to resist chemicals and contaminants produced in various industrial chemical processes.   Features:   Rotronic Hygrometer Capacitance sensor Dew Point and wet bulb temp Accuracy and long term stability 1.5% rh / per year Max, velocity 20 m / sec Duct and wall mounting IP 65 ABS Probe Interchangeability Humidity Sensor for operating Temp.-50 to +200 c available Model : HYGROCLIP S/CP Probe Dia : 15mm* Length 86 mm IP 65 Output :0 to 1 VDC (4 wire) Range: Temp.: 40 to +60 c+1 c Humidity: 0 to 100% Rh.+1.5% Rh Ex. Voltage: 10 to 35 VDC Cable length: 2 mtrs. Model: M-1 SERIES (FIX PROBE) Probe Dia :15 mm* Length 200 mm IP65 Output:4 - 20 m ADC (2 wire) Range: Temp.: 40 to +60 c+1 c Humidity: 0 to 100% Rh.+1.5% Rh Ex. Voltage: 10 to 35 VDC M2- SERIES & M-3 SERIES PROBES ARE DETACHABLE / REPLACEABLE WITH DISPLAY MODEL AVAILABLE Model: ROLINE - L Probe Dia: Built in (wall mounting model) 205 mm duct mounting Output: 4 - 20 ma DC (2 wire) Ex. Voltage: 10 to 35 VDC Range: Temp.: 0 to +50 c+1 c Humidity: 0 to 100% Rh.+1.5% RH

SITRANS F M TRANSMAG 2 with the SITRANS FM 911E sensor is a pulsed alternating field magnetic flowmeter where the magnetic field strength is much higher than conventional DC pulsed magnetic flowmeters.

Available versions: Standard; ATEX; Schiff & Offshore; with front-flush diaphragm The pressure transducer series HDA 4400 is equipped with a pressure measurement cell with thin-film DMS on a stainless steel diaphragm. The 4 ... 20 mA or 0 ...10V output signals enable the connection to all measurement and control devices of HYDAC ELECTRONIC GmbH and the linkage to commercially available evaluation systems (e.g. SPS controls). The variant with the front-flush diaphragm was specially developed for applications in which the media used could lead to a blockage, gumming-up or freezing of a standard pressure connection. The main areas of application are in the mobile and industrial sectors of hydraulics and pneumatics, particularly in applications with constricted cavity. Further applications include processes where the medium changes frequently and any residues could cause mixing or contamination of the media. Accuracy ±0.5% FS type. Measurement ranges: between 0 ... 16 and 0 ... 600 bar Very robust sensor cell Highly accurate temperatures

• Type: Sensor Transmitter
• Weight: 0-100 Gm, 100-200 Gm
• Display Type: Digital
• Accuracy: +/-2%.
• Enclosure: ABS
• Humidity: 95% RH, 99% RH
• Linearity: 0.02% FS, 0.03% FS
• Measuring Range: 0-10 Ppm, 10-20 Ppm
• output signal: 0-5 MA, 10-15 MA, 15-20 MA, 5-10 MA
• Temperature: -40- +20 Deg C, 20-80 Deg C, 80-140 Deg C
• Operating Temperature Range: 2 to 45 Degree C (36 to 113 Deg F)

Flow Sensors – In Line Turbine Type   ¾ inch/20 NB Flow Sensor Max Flow-1000 lph 1 inch/25 NB Flow Sensor Max Flow-6000 lph 2 inch/50 NB Flow Sensor Max Flow-25000 lph Insertion Type Flow Sensor, In Line Paddlewheel Type Pulse Flow Sensor     Switches   Dosing Switch – Positive Displacement Dosing Flow Sensors Brine Switch – Level Switch to Detect Brine Floaty – Level Switches for Auto MPV based Level Control, Wire – Common/NO/NC Potential Free Contact Transmitter 4-20mA, 4-wire Conductivity Transmitter 4-20mA, 4 wire pH Transmitter 4-20mA, +/- 1000mV, 4 wire ORP Transmitter

• Power Supply: 16
• Working Voltage: 24V DC +- 15%
• Working Humidity: Less than 95% R.H
• Combustible Gas: - 40 deg C
• Resolution: +- 3 ppm