Sharp Air Engineering Trichy Road, Coimbatore, Tamil Nadu

ZERO COMPRESSED AIR LOSSES An electronic sensor ensures the drain only works when there is condensate to discharge – this is done without any air losses. The intelligent electronic controller ensures loss free discharge and also monitors the condition of the drain. CONTROL FUNCTION An LED display indicates the operating condition of the drain. A potential free contact (not available in Bekomat 31) allows remote monitoring – for high operating safety.

Absolutely oil free compressed air integrated converter oxidise the oil contained in the compressed air into carbon dioxide and water; the treated compressed air is in accordance with ISO class 0;  and any condensate left is oil free Safe compressed air production tested and certified BOGE components guarantee safe class 0 compressed air for the pharmaceutical, chemical, semiconductor and food industries Durable BOGE converter BOGE converter equipped with overload protection; under normal operating conditions, expected 5-year service life until overhaul (in line with TÜV [Technical Inspection Authority] deadline for air receiver) Demand oriented operation BOGE SLF 40 BLUEKAT is able to flexibly adapt the speed of both the drive motor and air end - frequency controlled for maximum efficiency   FAD: 3,95 - 6,48 m3/min 139 - 229 cfm Pressure range: 8 - 13 bar 115 - 190 psig Motor range: 30 - 37 kW 40 - 50 PS  

Our PP-R pipes and fittings are made of high molecular weight Polypropylene Random copolymer suitably stabilized for high temperature applications and especially with high environmental stress cracking resistance that enables long service life.                   Our PP-R pipes and fittings are manufactured in accordance with German DIN standards, the Raw materials used are Koylene ADL-CP AER003N are manufactured and supplied by Industries Limited.                 This Raw material is recommended for manufacturing high pressure pipe lines.     Clean & Contaminant – free air. Easy to install and simple to extend. Leak proof piping system. Corrosion resistance. Very less in Coefficient of friction Prevents high pressure loss. Allows higher flow rate. Zero condensate swan neck fitting. Light weight. Easy alteration flexibility. Easy dismantling and reusage. Connectors are brass with nickel coated

Pneumatic pipe The unions in AIRCOM's QUICK LINE series can be coupled with aluminium pipes as well as rigid PVC pipes, and can be perfectly integrated with all other AIRCOM product ranges.The AIRCOM QUICK LINE system is ideal for transporting compressed air up to a pressure of 13 bar. The product range (pipes, unions and fittings) can be used for creating complete systems, starting from the manufacturing unit to the handling, to the loop distribution system up to all peripheral couplings .

Lower costs and less time spent when extending your system Energy cost savings due to baseload and peak-load compressors FAD:                          185 - 1913 l/min 6,5 - 68 cfm Pressure options:     10, 15 und 35 bar 150, 220 und 515 psig Motor size:                1,5 - 15 kW 2 - 20 HP

Copper bundle intercooler and aftercooler, maintenance-friendly for easy cleaning. Replaceable stage bearings, no need to stock spare stages. DIN and VDE switch cabinet with IP 54 protection, dirt repellent. Three-phase asynchronus motor, ISO class F. Additional motor reserves for challenging operating conditions. Long service life of the motor due to installation in the cooling air intake section. Nylon laminates fibre mat acoustic lining, noise damping, washable. Connection to a HOC adsorption dryer with no external energy for pressure dewpoints to -40°C (optional for all BOGE SO series compressors). Motor ranges:         1.5 - 5.5 KW Free Air Delivery:   0.155 - 0.77 m3 /min

Low Sound Enclosure Nema-4 Packaging TEFC Premium Efficient Motors ARS Microprocessor Controller operates up to 25% more efficient than load/unload operation Modularized construction allows for quick and easy maintenance; up to 50% less labor than competitive units All standard compressors and spare parts are in stock for immediate shipment FAD:                       33,0 - 43,7 m3/min 1166 - 1544 cfm Pressure range:     8 - 13 bar 115 - 190 psig Motor range:          200 - 355 kW 270 - 480 HP

NO COMPRESSED AIR LOSSES Float operated drains only open when there is condensate to remove. That means that compressed air losses are avoided. SIMPLE OPERATING PRINCIPLE Float operated drains work very simply however they are more sensitive to dirt and require regular maintenance.

A modular compressed air system to meet the requirements of your PET bottle application: BOGE FLEXPET has been designed for total flexibility and convenience. The individual components can be assembled on-site according to specific requirements and the prevailing site conditions.   A screw compressor generates air to 11 bar which is then dried to a   Pressure dew point of -40°C. Boosters then make the required operating pressure up to a maximum of 40 bar. This pressure control saves energy.   Compressor spec:  Free air delivery: 99 to 1076 m3/h

Compressed air piping system It has been designed as a flexible instrument that can be integrated whith all existing systems in the world and is able to meet all needs, even in the most complex systems.The unions in AIRCOM's QUICK LINE series can be coupled with aluminium pipes as well as rigid PVC pipes, and can be perfectly integrated with all other AIRCOM product ranges.T

Cyclone separators remove liquids, fine mists and solids from the compressed air.   Cost-efficient use of BOGE cyclone separators Directly downstream from the compressor   if no compressed air receiver is fitted if compressed air receiver is a long distance away if the compressed air pipeline rises vertically  Flow capacity: 2,20 - 65,63 m3/min

Pre-filters separate out coarse impurities from the compressed air. BOGE pre-filters remove solids from compressed air with anefficiency of 99.925 % relative to 1 μm. Cost-efficient use of BOGE pre-filters Upstream from compressed air dryer and micro-filter for applications where the intake air has a very high dust content Capacity: 36 - 31248 m3/h

Microfilters separate out extremely fine impurities in the compressed air. BOGE microfilters remove solids from compressed air with an efficiency of 99.9999% relative to 0.01 μm. Cost-efficient use of BOGE microfilters As the main filter in the compressed air line or as an end-of-line filter upstream from pneumatic equipment

Intelligent Saving Microprocessorised load dependent regulation of DR series refrigerant dryers. Reduced quantity of refrigerant R 134a is the standard refrigerant used throughout the whole DR range. Unlike more traditional refrigerant dryers, the quantity required has been reduced considerably by up to 70%. Environmentally friendly BOGE refrigeration technology Anyone involved in refrigeration technology, has a special responsibility. That is why when designing the DR series, right from the outset, a great deal of importance was attached to the environmentally friendly manufacture, operation and final waste-disposal of our refrigerant dryers. Flow capacity:                      0,33 - 27,5 m3/min 12 - 972 cfm Max. operating pressure:    16 bar 235 psig

Activated carbon adsorbers are recommended for installation downstream of compressed air dryers with filters, in order to eliminate odour and clean any residual oil aerosols to 0.003 mg/m3.   The advantages of using the BOGE DC activated carbon adsorber Large volume of activated carbon - 'Technically' oil-free, breathing quality air at 0.003 mg/m3 Optimum technical design - high-quality compressed air Oil indicator supplied as standard - ensures consistent air quality Optional FP (dust) filter fitted upstream extends active carbon life - reduced maintenance downtime For safety reasons, it is recommended that a V series filter should also be installed downstream (option), as very fine solid particles from the activated carbon bed may contaminate the compressed air. Flow capacity: 8 - 950 m3/h 4 - 559 cfm Max. operating pressure: 16 bar, 230 psig

THE AIRCOM QUICK LINE system is AIRCOM's latest development in the distribution of compressed air. It has been designed as a flexible instrument that can be integrated whith all existing systems in the world and is able to meet all needs, even in the most complex systems.  The unions in AIRCOM's QUICK LINE series can be coupled with aluminium pipes as well as rigid PVC pipes, and can be perfectly integrated with all other AIRCOM product ranges.  Quick to install, QUICK LINE still guarantees a perfect pneumatic seal, remarkable mechanical resistance and constant efficiency over time

THE AIRCOM QUICK LINE system is AIRCOM's latest development in the distribution of compressed air. It has been designed as a flexible instrument that can be integrated whith all existing systems in the world and is able to meet all needs, even in the most complex systems.The unions in AIRCOM's QUICK LINE series can be coupled with aluminium pipes as well as rigid PVC pipes, and can be perfectly integrated with all other AIRCOM product ranges.The AIRCOM QUICK LINE system is ideal for transporting compressed air up to a pressure of 13 bar. The product range (pipes, unions and fittings) can be used for creating complete systems, starting from the manufacturing unit to the handling, to the loop distribution system up to all peripheral couplings

Air pipe It has been designed as a flexible instrument that can be integrated whith all existing systems in the world and is able to meet all needs, even in the most complex systems.The unions in AIRCOM's QUICK LINE series can be coupled with aluminium pipes as well as rigid PVC pipes, and can be perfectly integrated with all other AIRCOM product ranges.The AIRCOM QUICK LINE system is ideal for transporting compressed air up to a pressure of 13 bar. The product range (pipes, unions and fittings) can be used for creating complete systems,

The C and CL series from BOGE provides a small and quiet screw compressor ideally suited to the smaller industrial compressor user, such as garages and workshops, noted for its very low sound pressure levels and compact design ensuring a small footprint.All components and parts are readily accessible from one point allowing service and maintenance work to be carried out in a hassle-free manner.

A base mounted piston compressor unit can provide an individual solution to your compressed air requirements. For example, you can quickly and easily extend an existing compressor system into a multiple compressor system.