Slurry Pumps Dealers in Coimbatore

The main Wear parts of Slurry pumps are wetted parts. Hydro prokav pumps adopts many kinds of anti-abrasive materials to extended the lifetime of Wetted parts. The Wetted parts material of construction for standard HHM Series pumps is high Chrome alloy and for series HHR is natural rubber. High Chrome alloy is wear resistant White iron that offer s excellent performance wetted parts such as EPDM, Hypalon,Hast alloy,CD4MCU, Chloroprene rubber, adhesive and other anti-abrasive materials.

• Country of Origin: India
• Type: Progressive Cavity Pumps
• Certification: ISO 9001:2008 Certified
• Voltage: 415 V
• Power: Electric
• Pressure: High Pressure
• Structure: Screw Pump
• Temperature: 80-160 Deg C
• Working Pressure: 80 Kg/cm2
• Viscosity Range: 50000-100000 Cp
• Country of Origin: India
• Material: SS 410 HCP/SS 304 HCP /SS 316 HCP
• Color: Green

• Condition: New
• Pressure: High Pressure
• Automation Grade: Automatic
• Warrenty: 1yr

• Capacity: Upto 2500 M3/Hr

Heavy duty centrifugal design, Conforming to DIN 24256, Open Impeller with renewable front wear plate, and Closed impeller with wear ring, End suction top centre line discharge, Simple external adjustment for Impeller wear, Gland Packed mechanical seal.

C.R.I. Pumps market presence is further established with the launch of yet another powerful range of pumps – ECH Series. With a host of positive and impressive features, ECH series augments the extensive range of C.R.I. Pumps.   Designed to meet high pumping requirements in terms of performance and efficiency , this range of Hard Metal Slurry pumps offer 11 different sizes of pumps that are customized to suit the specific applications of the customer. High quality, better efficiency, heavy duty, corrosive and non-corrosive liquors, suspended solids, effluents, vertical and horizontal configuration and prompt pre & post sales services are some of the key features that enhance the utility of ECH series pumps. The assurance of C.R.I. Pumps is reinforced by the commitment delivered through the performance of its new range - ECH Series that stands for performance beyond the limits of technology. The unprecedented level of engineering perfection is designed to meet the burgeoning demands across the world. APPLICATIONS All Abrasive Slurries & Sludge Abrasive Chemical & Process Liquors Hard Solids Entrained Liquors Sand Filter Recovery Beach(Sand)Recovery/Dispersal FEATURES Fully Closed Impeller External Impeller Adjustment Optional Discharge Nozzle Position Renewable Wear Parts Back Pull-Out Heavy Duty Construction Maximum Parts Interchangeability Aggregate & Mineral Slurries Mineral & Ore Processing Cyclone Feed & Under-flow Coal & Ash Slurries

As the name suggests, slurry pumps are designed to handle liquids containing abrasive and coarse grained solids. It has a heavy duty design with a single stage axial inlet. It is also suitable for sand water mixtures and other related slurry.

We hold expertise in offering a wide range of Submersible Slurry Pump. Finely designed our pumps are manufactured using best available technologies and employing top quality components. Some of the salient features of our devices are its robust design, accurate dimensions and longer functional life. We offer our pumps at reasonable rates.Features: Convenient to move from place to place Foot valve is not required No separate foundation is required

• Delivery Size: DN 50 to 400 mm
• Capacity: Up to 2000m³/hr
• Head: Up to 90 m/stage
• Temperature: Up to 110° C

Being a leading Slurry Pump Manufacturer & Supplier in India, Our horizontal slurry pump range is widely used in mining, construction, process industries & industrial applications. Our horizontal slurry pumps are designed to work in heavy-duty applications such as mineral processing plants, sand-washing plant and other specialty applications.

Sewage Agitator pumps are designed for industrial, mining and power plants or wherever the slurry solids have a tendency to accumulate, agitator pumps are the solution. Since the water always flows to the path of least resistance, a pump without mechanical agitation will only pump the water, leaving the solids behind to accumulate around the pump intake. Agitator pumps deliver kinetic energy (energy of motion) to slurry solids, which surrounds the pump intake, re-suspending them into a fluid state. These solids, which would have been otherwise buried, are pulled into the pump and pushed on through the discharge, keeping the intake clear and free of slurry accumulation. Working application: Sand mining Tailings ponds Fly ash/ bottom ash Sand and Gravel excavation Hazardous waste clean-up Tank clean up (replacing vacuum trucks) Cement plants Agricultural wash down pits (carrots, beats etc) Mill scale/ slag pits Barge unloading Silt removal Removal of filer media at waste treatment plants

MATERIAL COMBINATIONS OFFEREDHichrome (28 % Cr, 600 - 650 BHN), Nihard & Rubber SALIENT FEATURES Greater wear life Closed / Open Impeller Tangential Discharge Casing Removable Suction & Rear Casing Liners Variable discharge nozzle positions Fixed / Variable speed drive Back Pull-out design OPERATING DATA Max.Working Pressure - 16 (bar) Max.Flow rate - 2500 rnVhr Max.Total Head - 100 mtr Max. Solid Size Dia - 126 mm Min/Max Speed - 720/960/1450 rpm Max. Temperature 180°c   APPLICATIONS All Abrasive Slurries & Sludges Mineral & Ore Processing Cyclone Feed & Under-flow Tailings Disposal Lime & Clay Slurries Classifier & Thickener Under-flow Dewatering, Wash down & Sluicing High Density Slurries & Sludges Coal & Ash Slurries Beach (Sand) Recovery

• Size: 400 mm
• Capacity: 2000m³/hr
• Temperature: 1100° C

As the name suggests, slurry pumps are designed to handle liquids containing abrasive and coarse grained solids. It has a heavy duty design with a single stage axial inlet. It is also suitable for sand water mixtures and other related slurry.

• Max Flow Rate: Up to 450m3/hr
• Frequency: 50HZ
• Voltage: 440v
• Brand Name: an foundry
• Size: DN 50 to 200 mm
• I Deal In: New Only
• Head: Up to 20m/stage

This kind of slurry pumps is suitable for delivering the strong abrasive, high density and low density, high head slurries, with wear parts and heavy duty supports.In the allowable range of pumps working pressure, the pumps could run in series to reach high head.

high chrome (astm a532 type iii) wet end parts give excellent wear life easy maintenance and less downtime. Smt pumps have been designed for both back and front pullout online casing design allows for online suction side wear clearance adjustment to maintain high performance throughout the pump life twin casing rugged design allows the pump to be used in high pressure and high abrasive applications low cost spares for low operational costs

Slurry Pumps, Screw Pumps, solar pumps, triple screw pumps, Twin Screw Pumps

Slurry Pumps, Dewatering Pumps, Industrial Pumps

Slurry Pumps, Hydrocyclones, Motorized Pulleys

Rubber slurry pump, Rexroth piston pump, Monoblock Pump Set

Slurry Pumps, self priming jet pumps, Screw Pumps, Pump Spare Parts

Horizontal Slurry Pump, Non Clog Slurry Pump, Centrifugal Regenerative Pump

Submersible Slurry Pump, Planetary Gear Motor And Planetary Gear Box

cew slurry pumps, Barrel Pumps, Magnetic Drive Pumps, non metallic pumps

Chemical Slurry Pump For Chemical Industry, Paper Pulp Pumps