Smart Cooling Systems Siruvani, Coimbatore, Tamil Nadu

We have with us a range of moisture separators that are designed to use for removal of extra water or any fluid carried by the gas. Manufactured using premium quality raw material, our range is high on durability, efficiency and can sustain even in the harshest surroundings. We offer our clients a wide gamut of moisture separators that are used for various industrial purposes. These moisture separators are designed to act as moisture separators cum filters for gas and compressed air. The structure of our range of air moisture separator consists of a completely sealed high performing cyclonic type mechanical moisture separator cum filter. High on durability and efficiency, these moisture separators can sustain even the harshest surroundings.   PRODUCT FEATURES → Stainless steel element / Baffle plate typ→ Mild steel pipes→ Mild steel plates

We are engaged in offering a comprehensive range of Heat Exchangers that is mainly used for transferring heat. These are offered in varied sizes, diameter and thickness, and are appreciated for their superior thermal conductivity, corrosion resistance and high tensile strength. We offer a wide range of high precision heat exchangers that is used to transfer heat from one medium to another. These heat exchangers are fabricated in such a manner that makes it highly efficient in recovery of heat without an accompanying phase change. Be it fluids, gases, steam or vapors, our range of heat exchangers helps in carrying out the heat recovery effectively.

A cooling tower is a heat rejection device, which extracts waste heat to the atmosphere though the cooling of a water stream to a lower temperature. The type of heat rejection in a cooling tower is termed "evaporative" in that it allows a small portion of the water being cooled to evaporate into a moving air stream to provide significant cooling to the rest of that water stream. The heat from the water stream transferred to the air stream raises the air's temperature and its relative humidity to 100%, and this air is discharged to the atmosphere. The generic term "cooling tower" is used to describe both direct (open circuit) and indirect (closed circuit) heat rejection equipment. While most think of a "cooling tower" as an open direct contact heat rejection device, the indirect cooling tower, sometimes referred to as a "closed circuit cooling tower" is nonetheless also a cooling tower.   PRODUCT FEATURES → TEFC IP55 Extended Shaft CT Motors, → Dynamic Balanced Axial Flow Fan, → Honey Comb Design PVC Fills, → Automatic Rotary Sprinkler, Spray Nozzles, → Anti Corrosivs Fasteners, → HDG MS Structure, → UV Resin FRP Casing, 

The Heat Exchnager is of BPHE and Tube in Tube, A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle. This liquid can then be circulated through a heat exchanger to cool air or equipment as required. As a necessary byproduct, refrigeration creates waste heat that must be exhausted to ambient or, for greater efficiency, recovered for heating purposes. Concerns in design and selection of chillers include performance, efficiency, maintenance, and product life cycle environmental impact. Industrial chillers typically come as complete, packaged, closed-loop systems, including the chiller unit, condenser, and pump station with recirculating pump, expansion valve, no-flow shutdown, internal cold water control. The internal tank helps maintain cold water temperature and prevents temperature spikes from occurring. Closed-loop industrial chillers recirculate a clean coolant or clean water with condition additives at a constant temperature and pressure to increase the stability and reproducibility of water-cooled machines and instruments. The water flows from the chiller to the application's point of use and back. PRODUCT FEATURES → Compact Design,→ Inbuilt stainless steel,→ High Pressure Pump,→ Air Cooled/ Water Cooled,→ Microprocessor Control (OIptional),→ Closed Cooling System,→ More Heat Transfer Area,

Air contains contaminants like solid (dust particles), liquid (moisture) and oil which contaminate the compressed air. When this contaminated compressed air is used for various applications, it may cause failures of pneumatic valves, instruments, etc which results in the downtime of whole system. Win Refrigerated Air Dryers remove the moisture to a level of 600 ppm (w) by using energy efficient refrigeration system and effective heat exchangers. The wet air enters into the economizer (pre cooler) of the refrigerated air dryer and the temperature gets reduced significantly by the outgoing cold air. This medium temperature air further enters in to the evaporator of the refrigerated air dryer and the temperature drops to 2oC by the cold refrigerant. At this temperature the moisture in the vapour form condenses into liquid and the same is separated by high efficient integral moisture separator and automatic drain trap. All the three components (i.e. pre cooler, evaporator and moisture separator) are integrated into one single unit. PRODUCT FEATURES → Low Pressure Drop,→ Lowest Operating Cost,→ Maintenance free,→ Compact Design,→ Power Saving,→ Constant Dewpoint @ Varying Load Condition,→ ECO Friendly Refrigerent,

Compressed air frequently contains dust, oil, rust, moisture and other harmful substances, and therefore requires filtration. In the first stage of filtration, the compressed air passes through a tube-shaped mesh filter, which creates a coalescence effect. Here bigger particles are adsorbed on the filter and the water will condense into larger droplets, which can then pass into the separation chamber. The compressed air is slowed down, which makes the particles condense on a honeycomb-like pad, allowing the water droplets to travel to the bottom of the drainage system and through an Manual or automatic or electric drain valve to the discharge. In the first filtration stage more than 95% of the water droplets, oil and large particles are removed. In the second filtration stage the air is passed through fiber made of cotton, generating thousands of small vortices and accelerating the air. PRODUCT FEATURES → Air Quality as per ISO 8573 - 1, → Colored elements for specific grades, → Low Pressure drop, 

Coil Cooling Tower is an equipment which is used to cool and maintain the temperature of process hot water at a particular level. This operates on the principle of heat transfer by a heat exchanger with extended fins. The fan is deiven by an Electric Motor. Applying dry cooling means saving water. Dry Cooling Tower is mounted on a heavy duty channel base frame. Non corrosive fibre glass / GI panels are used for enclosure. Aero dynamically balanced high efficiency axial flow fans with low noise are used. The motors are IP 55 class with extended SS shaft. The low speed of the motor minimises noise and increases efficiency. Motors are specially designed to withstand moisture, rain and dust. The hot water from the diesel engine is sent to the inlet of the Dry Cooling Tower. This hot water is cooled and cold water from the outlet of the cooling tower is connected to a pump which pumps the water to the diesel engine (or any other load) to pick up the heat from the generator. PRODUCT FEATURES → Win coil cooler contains rugged steel construction.→ Non corrosive epoxy painting in frame.→ Extruded fins used for higher cooling performance.→ Wings fans for high air flow with adjustable pitch.→ TEFC - (Total enclosed fan cooled Siemens motor) use.→ Pipe line leak test up to 5 bar.

We are the leading manufacture of high quality Coolers to our clien tèle. The coolers provide two necessary functions that provide the conditioning of compressed air. Firstly it reduces the temperature of the air to a safe operating range while secondly, removing the moisture condensed during the cooling process. Air receiver is a vessel which contains air at high pressure for use in service industries. We do manufacture Air Receiver with different capacities and pressure rating. Generally our product is made out of IS2002, SA516Gr70, AISI 304, AISI 316 materials.

We are the leading manufacture of high quality Coolers to our clien tèle. The coolers provide two necessary functions that provide the conditioning of compressed air. Firstly it reduces the temperature of the air to a safe operating range while secondly, removing the moisture condensed during the cooling process. Air Cooled After Coolers : Dryers are sized according to the flow, pressure, temperature and dew point required of the compressed air. If these conditions are changed, the resulting efficiency of the dryer can be drastically affected. The temperature of the compressed air leaving a compressor varies from 65 °C to 200 °C, depending on the type of compressor, it is essential that an After Cooler be installed upstream of most dryers because it will lower the temperature to required level and will remove 50 to 75% of water vapour contained in the air. After coolers are available in either air or water cooled units.   PRODUCT FEATURES → Work pressure - 16 bar→ Heat exchanger is fully enclosed.→ Compact Size.→ Low power consumption→ Easy for installation→ Corrosion resistance painting→ High Efficiency copper tubes.