Swish Coatings Perur, Coimbatore, Tamil Nadu

Roofin 2K is one of the best product available in the market  Acrylic based, cementitious and Fibre reinforced. Ideal for waterproofing of bathroom and similar areas before laying Tiles. To be applied in slurry form with thick painting brush. Wet the surface fully and when the water is almost absorbed, apply the Coating. With 5kg unit a aproximately 65 to 75sq.ft (2coats) area can be covered. Most economical. No peeling off makes Roofin 2k unique among similar products. Lasts for years. U V Resistant. Fast drying.Easy to apply with Brush. Dilution with Water

Type : Acrylic Polymer Waterproofing Coating

Color : Grey,Grey

Form : Powder+hardener

Packaging Type : 5kg Paint Bucket

Packaging Size : 5kg

Cool Roof * is the best product available in the market with Solar Reflective and Water Repellent combined in a single product. With 4kg unit a 10' X 10' area can be covered - 3coats. Upto 16*C reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces Energy consumption of Air Conditioners etc by minimum 15% in Summer. Most economical. No peeling off makes Cool Roof* unique among similar products. Lasts for years. Easy to apply with Brush. Dilution with Water

Color : 4kg

Roof Shield, an innovative Solar re-radiating compound, is formulated by us after  thorough research and field testing. Roof Shield acts as Solar insulator as well as Leak arresting coating. The active chemical components (including imported UV protecting chemicals) in Roof Shield  yield a flexible water proof  coating and it minimizes the thermal build up. Roof Shield acts like a shield to prevent Roof expansion and contraction besides reducing the chance of Roof Leakage and lasts long. Roof Shield is a mixture of high grade acrylic resin and specially graded chemicals and selected additives.  It dries by evaporation to yield a tough, flexible, non yellowing abrasion resistive and water repellent surface. It can be applied on all surfaces such as Concrete, Asbestos, Tiles, Galvalum, Aluzinc etc.   Areas of Application  Building roofs / terraces — Flat & Sloping and Exterior Walls of  Made of Cementitious materials, Concrete, Asbestos, Tiles, Galvalum, Aluzinc etc.   Method of Application   Surface Preparation: On Concrete Roof or ordinary walls, surface must be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks should be made wide at the surface and wet the surface of the crack with hardener by paint brush before applying Crack Sealant in a thick paste form. Apply Three coats of Roof Shield after proper mixing and dilution with water by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days    MAINTENANCE & RECOATING of Roof Shield Over a period of time or some years,of Roof Shield on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only one coat of application of Roof Shield is enough to extend the life for another couple of years    POST APPLICATION MAINTENANCE Clean the surface once in a month with water; Do not Dump any materials on the surface    Precautions & Limitations  All corners, gaps, joints, protrusions & outlets shall be coated with two extra coats. Do not apply during rains; substrate must be in SSD condition for application of Roof Shield-The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Do not apply Roof Shield over expansion or moving joints To achieve the full proof waterproofing, parapet walls should be covered with Roof Shield Never Over dilute Roof Shield with water for ease of application    Health & Safety Precautions  Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact: immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person. Call a Physician. 

Texture : Soft

Packaging Type : 4kg

Drying Time : Fast Drying -within 30minutes, Second Coat Can Be Applied If Exposed To Direct Sunlight

Color : White

Roofcryl-017, Acrylic Polymer, Transparent Waterproofing Coating comes in One kg Plastic Bottle. Suitable for Wateproofing or to bring back the original glaze of Granites and Tiles on Walls. Also suitable to use as Waterproofing Coating with White Cement and Water in the Ratio 1:2: 3. Can be used as additive in Cement and Sand paste for all types of Masonry. It makes the paste stronger and Waterproof. Dries very Fast and lasts for years. Dilution with Water.

Type : Acrylic Polymer Waterproofing Coating

Color : Transparent

Form : Liquid

Packaging Type : Bottles

Packaging Size : 1 Kg

roof shield is one of the best product available in the market with solar reflective and waterproofing properties combined in a single product. With 4kg unit a 10' x 10' area can be covered - 3coats. Upto 21*c reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces energy consumption of air conditioners etc by minimum 15% in summer. Most economical. No peeling off makes roof shield unique among similar products. Lasts for years. Easy to apply with brush. Dilution with wate

Color : White

Color : White

Roof Guard, an innovative water proofing/leak arresting 2part compound, is formulated by us after thorough research and field testing. Roof Guard acts as Leak arresting coating. The active chemical components (including imported UV protecting chemicals) in Roof Guard yield a flexible water proof coating. Roof Guard acts like a shield and by its ability to penetrate into micro pores of the substrate thereby reducing the chance of Roof Leakage and lasts long. Roof Guard is a mixture of high grade acrylic resin and specially graded and selected additives. It dries by evaporation to yield a tough, flexible, non yellowing abrasion resistive and water repellent surface. It can be applied on all surfaces such as Concrete and Cementitious surfaces-Roofs & Walls.    Areas of Application   Building roofs / terraces — Flat & Sloping and Exterior Walls of Made of Cementitious materials, Concrete, etc.    Method of Application  Surface Preparation: On Concrete Roof or ordinary walls, surface must be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks should be made wide at the surface and wet the surface of the crack with hardener by paint brush before applying Crack Sealant in a thick paste form. Apply three coats of Roof Guard after proper mixing and dilution with water by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days    MAINTENANCE & RE-COATING OF Roof Guard Over a period of time or some years,of Roof Guard on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only one coat of application of Roof Guard is enough to extend the life for another couple of years POST APPLICATION MAINTENANCE Clean the surface once in a month with water; Do not Dump any materials on the surface Precautions & Limitations All corners, gaps, joints, protrusions & outlets shall be coated with two extra coats. Do not apply during rains; substrate must be in SSD condition for application of first coat. The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Do not apply Roof Guard over expansion or moving joints To achieve the full proof waterproofing, parapet walls should be covered with Roof Guard Never Over dilute Roof Guard with water for ease of application    Health & Safety Precautions  Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact: immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person. Call a Physician. 

A Direct Substitute for Thinner Based Epoxy.  Metal Guard, an innovative Anti-Corrosive, Abrasion Resistive, Water Proof coating  is formulated by us after thorough research and field testing. Metal Guard acts as  anti-corrosive, water proof shield, The active chemical components (mostly imported from  Germany & USA ) in Metal Guard yield a highly anti-corrosive, abrasion resistive flexible water proof coating and it thus extends the life of Roofs (metal sheets and truss parts) considerably. It dries very fast by evaporation to yield a tough, flexible, non yellowing abrasion resistive  and water repellent surface. It can be applied on all types of Metal surfaces such as Aluzinc,  Galvalum, G.I. etc.

Color : Any Colour

glass coat is one of the best products available in the market with solar reflective, thermal insulative and water repellent combined in a single product. With 2kg unit about 200 area can be covered -2coats. Retards the heat flow through the galss considerably. Room temperature will be reduced substantially. Reduces energy consumption of air conditioners etc most economical. No peeling off  lasts for years. Easy to apply with spray gun. Colour can be changed

Brand Name : Swish Coatings

Application : With Spray Gun

Type : Paste

Seal Crack is one of the best product available in the market Acrylic Based and Fibre Reinforced. Suitable for all types of cracks (upto 3mm) in concrete or cementitious Roofs , Terraces and Walls (except expansion joints). Most economical. Fast drying and once dried becomes very strong. Seal Crack is unique among similar products. Lasts for years. U V Resistant. Easy to apply with knife or Putty blade after thorough mixing. Dilution with Water

Brand Name : Swish Coatings

Form : Powder + Hardener

Application : For Filling Cracks On Roofs And Wall

Description  Cool Roofs an innovative, two component acrylic based Elastomeric Solar Reflective, & Water Repellent Coating. The active chemical components (including imported UV protecting chemicals) in Cool Roof yield a flexible water repellant coating and it minimizes the thermal build up. Cool Roofacts like a shield to prevent Roof expansion and contraction besides reducing the chance of Roof Leakage and lasts long and is formulated by as after thorough research and field testing.    Cool Roof is a mixture of high grade acrylic copolymer as binder. and specially graded chemicals and selected additives. It dries by evaporation to yield a tough, flexible, non yellowing and water repellent surface. It can be applied as Top Coat as well as Base Coats on all surfaces such as Concrete, Asbestos, Tiles, Galvalum, Aluzinc and direct coating on Masonry Walls.    Areas of Application : Building roofs / terraces — Flat & Sloping and Exterior Walls made of Cementitious materials, Concrete, Asbestos, Tiles, Galvalum, Aluzinc etc.    Method of Application  SURFACE PREPARATION  Surface Preparation: On Concrete Roof or ordinary walls, surface must be free from dust, loose material, paint, oil, or any material which may impair adhesion. Mechanical means such as wire brushing can be used. Finally vacuum cleaning of all loose solids and liquids can be done if required. All surface cracks should be made wide at the surface and wet the surface of the crack with hardener by paint brush before applying Crack Sealant in a thick paste form. Apply Cool Roof -3Coats after proper mixing and dilution with water by brush at an interval of 2-3 hours between each coat. Allow the coated surface to air cure for 3 days    MAINTENANCE & RECOATING : OF Cool Roof Over a period of time or some years,of Cool Roof on exposure to weathering or extreme temperature variations, it is extremely easy to re-coat over it again, only one coat of application of Cool Roof is enough to extend the life for another couple of years    POST APPLICATION MAINTENANCE : Clean the surface once in a month with water; Do not Dump any materials on the surface    Precautions & Limitations  : All corners, gaps, joints, protrusions & outlets shall be coated with two extra coats. Do not apply during rains; substrate must be in SSD condition for application of Cool Roof Coat. The product is designed only for foot traffic and not vehicular or movement of machinery or equipment. Do not apply Cool Roof over expansion or moving joints To achieve the full proof waterproofing, parapet walls should be covered with Cool Roof Never Over dilute Cool Roof with water for ease of application    Health & Safety Precautions Skin Contact: Wash skin with soap & water. remove contaminated clothes. On eye contact: immediately splash eyes with plenty of water. Consult Physician if irritation persists. Ingestion: not induce vomiting. never give anything by mouth to an unconscious person. Call a Physician. 

Drying Time : Fast Drying -within 30minutes, Second Coat Can Be Applied if Exposed to Direct Sunlight

Drying Time : Within 30minutes during Day time when exposed to Sun

Cool Roof -Jantha is the economy product available in the market with Solar Reflective and Water Repellent properties combined in a single product. With 4kg unit a 10' X 10' area can be covered - 3coats. Upto 12*C reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces Energy consumption of Air Conditioners etc during hot Summer season. Most economical. No peeling off makes Cool Roof-Jantha unique among similar products. Lasts for years. Easy to apply with Brush. Dilution with Water. 

Drying Time : Fast Drying -within 30minutes

cool roof -jantha is the economy product available in the market with solar reflective and water repellent combined in a single product. With 4kg unit a 10' x 10' area can be covered - 3coats. Upto 12*c reduction in surface temperature can be achieved. Room temperature will be reduced substantially. Reduces energy consumption of air conditioners etc by minimum 15% in summer. Most economical. No peeling off makes cool roof-jantha unique among similar products. Lasts for years. Easy to apply with brush. Dilution with water. Sq.ft rate will be approximately rs.15/- for 3 coats.

Color : White