Trident Pneumatics Private Limited KNG Pudur, Coimbatore, Tamil Nadu

Dirt, oil and vapour coming through compressed air without getting filtered could eventually have adverse effects on your end products. These contaminants have to be periodically filtered through effective means to increase the performance of pneumatic tools. oil and water is present both in liquid and vapour state. Complete liquid oil and water is removed by coalescing filters manufactured by trident, which has a filter media (boro silicate micro glass fibres). Oil vapour is removed by activated carbon filters. features * automatic drain valve as standard fitment * particles upto 0.01 microns are also filtered at lower efficiency * very low pressure drop. 1 psi for dry media and 2-3 psi for wet media with 10-20 wt oil * status indicator * different coalescer grade for various applications * maximum oil carry over of 0.008 ppm w/w

Features : * Flow upto 2000 cfm * Pressure upto 100 kg/cm^2.

Weight : 850 Kg

Features 1.Condensing Temperature control for ambient Temperature variations. 2.Hot gas by-pass circuit for partial load. 3.Maintains constant pressure dewpoint. 4.Compressor safety through HP cut switch. 5.The advanced mimic display indicates the functions & faults if any. 6.Trident Automatic Drain Valve provided in Demister & Heat exchangers for effective Dryer functioning.

Weight : 55 kg

Designed and tested to provide 100% clean dry oil free compressed air. The dryspell is a compact dryer with valves, piping built into the manifold. The dryers are suitable for point of use and available for 10, 20, 30, 45, 60, 90 scfm. The dryer is very economical as it is manufactured in large quantities. features * manifold construction * shuttle valve for low pressure drop * microprocessor based controller * pre filter with borosilicate glass element

Features 1.Purge economizer, an energy saving device reduces purge loss to as low as 50%. 2.Programmable Controller, with clear functional displays, ensures uninterrupted operation even while tower changeover. 3.Automatic drain valves in pre and oil filter to reduce moisture load and to ensure life of desiccant at no extra cost. 4.All new Microprocessor based controller has a unique purge economizer. The dryer load can be manually set. It can also accept up to 3 compressor load/unload contact and compute dryer load dynamically. The purge is set accordingly. The controller also accepts a pressure input and purge air is controlled accordingly.

Weight : 380 kg

ldv series: * zero air loss * noise free * condensate sensing type * design patented features: 1. the electronic level control ensures proper draining of condensate and avoids unnecessary loss of air. 2. all the functions of the valve are accurately indicated by the led display. 3. test switch (or) manual drain allows function test at anytime. 4. intelligent controller detects valve, probe failure test at anytime. 5. noise free, as air is not discharged.

Weight : 1.25Kg

the valve has a large orifice and special solenoid operator section to discharge dust. should the valve still get clogged you can service it without removing from the installation. press the knob at the bottom of the valve to mechanically clear all the sludge. electronically flush a few times and now it is fully serviced and ready for use. features: * easy to mount at all locations * maintain and clean drain valve without removing from service. * on and off timing adjustable * large orifice for effective drain of dust and condensate * condensate discharging is no more problem * design patented

Weight : 350 gms

Weight : 48 Kg