Tube Heat Exchanger Dealers in Sidco Industrial Estate, Coimbatore

U-Tube Heat Exchanger can be many variations on the shell and tube design. Typically, the ends of each tube are connected to plenums through holes in tubesheets.  

Shell and Tube Heat Exchanger is the most common type of heat exchanger in oil refineries and other large chemical processes, and is suited for higher-pressure applications. Shell Tubes Heat Exchanger are classified into fixed and Floating type Heat Exchangers . Fixed type Heat Exchangers are used where there are absolutely no chances for inter mixing of two fluids.   Shell and tube heat exchangers consist of a series of tubes. One set of these tubes contains the fluid that must be either heated or cooled. The second fluid runs over the tubes that are being heated or cooled so that it can either provide the heat or absorb the heat required. In this type, the tube sheets are completely welded to the shell and acted as shell flanges. The Floating type Heat Exchangers has the advantages of removability of tube bundle and access for cleaning both inner and outer side of tubes and shell.   Specifications Shell Tube Heat Exchanger stream a process fluid and other cooling water or air. This is an efficient way to conserve energy. Two-phase heat exchangers can be used to heat a liquid to boil it into a gas Applications : Shell Tube Heat Exchanger is widely used in variety of application as a cooling solution. The most common amoung them is for cooling of Hydraulic Fluid and oil in engines, transmissions and hydraulic power packs. With the right coimbination of materials they can also be used to cool or heat other mediums, such as swimming pool water or charge air. One of the big advantages of using a shell and tube heat exchanger is that they are often easy to service, particularly with models where a floating tube bundle (where the tube plates are not welded to the outer shell) is available. Can also be used on fixed tube sheet heat exchangers space heating refrigeration air conditioning power plants chemical plants petrochemical plants petroleum refineries natural gas processing sewage treatment Advantages : Shell Tube Heat Exchanger is often easy to service, particularly with models.

Vertical Shell and tube heat exchangers consist of a series of tubes. The second fluid runs over the tubes that are being heated or cooled so that it can either provide the heat or absorb the heat required.One set of these tubes contains the fluid that must be either heated or cooled. Vertical Shell Tube Heat Exchanger is widely used in variety of application as a cooling solution.

Calorifier is a term used to describe an extensive range of industrial and commercial hot water heaters. High performance tubular heat exchangers ensure Heat Transfer Equipments calorifiers offer the most flexible and economic solution to provide your hot water heating requirements. Heat Transfer Equipments heat exchangers utilize a range of primary heating systems.   Primary Heating Systems   LTHW (maximum temperatures of 100°C)   Low temperature hot water is the most common means of heating. Flows are usually based on a temperature drop of 11°C (from 82–71°C).   MTHW (100°C–120°C)   Medium temperature hot water systems are generally designed on a temperature drop of 30°C (from 120–90°C).   HTHW (temperatures above 120°C)   High temperature hot water systems are generally designed on a temperature drop of 40°C (from 150–110°C). Another important factor in the selection of primary water heating systems is the working pressure. Where the primary working pressure is greater than the shell design pressure the calorifier must be fitted with a bursting disc sized in accordance with the requirements of BS 853. Primary water pressure drops are generally not greater than 25 kPa. With HTHW Systems we recommend the use of flanged connections rather than screwed joints.   Steam   Steam is an ideal medium for water heating. Tubular heat exchangers can be designed to accommodate a wide range of pressures, although most users prefer to have calorifiers operating with pressures below 10 Bar g. Superheat can be accommodated and the degree of superheat should always be stated at the enquiry stage.   Condensate   Condensate tubular heat exchangers can be used to accommodate flash steam and subcool condensate. This harnesses the available heat which would otherwise be discharged from a traditional two pass tubular heat exchanger.   Heat Transfer Oil   Thermal oils have the benefit of high temperature combined with low operating pressures. Tubular heat exchangers are generally manufactured from cupro-nickel or stainless steel, depending on oil type.   Refrigerant   Generally only superheat is taken from systems although condensing units are available. Tubular heat exchangers are designed with double tube sheets incorporating a tell tale leak path. This reduces the risk from cross contamination between the secondary and primary sides.   Waste Heat   Storage calorifiers are a useful means of recovering waste heat from a variety of liquids or vapours and Heat Transfer Equipments offer a special design service for this purpose. Where the temperature or quantity of waste heat is insufficient for the desired output, supplementary heating can be incorporated into the calorifier to boost the storage temperature. The calorifier should be sized to absorb the maximum quantity of waste heat during the time it is available.   Water Hardness   Where it is required to heat water with a high degree of hardness, special precautions should be taken. This is especially true where high primary temperatures are encountered.   Calorifier Codes of Practice   BS 853 BS 6700 BS 5500 Commercial Calorifiers   Shell Materials   Copper Shells Stainless Steel Galvanised Steel Shells Duplex Cupro Nickel   Heat Exchanger Types   U-Tube Battery = Calorifier   This is the most common type of heat exchanger used in calorifier manufacturing. High efficiency tubes unaffected by thermal expansion provide extremely high levels of reliability. To ensure a high heat transfer capacity a wide range of multi-pass exchangers are available. Standard bundle arrangements are manufactured from 20mm tube although other diameters are used depending upon the duty requirement. Finned and plain tube options enable Heat Transfer Equipments to offer economic solutions to meet the most demanding duties.   Tubes are generally expanded into the tube plates and do not require sealing gaskets or ferrules. For high pressures and temperatures doubled grooved tube plates are offered. For tube bundles with straight lengths greater than 1250mm support baffles are fitted as standard. In order to ease disassembly batteries greater than 380 mm in diameter are fitted with a tapped hole to accept a lifting eye. In addition runner wheels, collar bolts and starting screws can be supplied. Tubes are available in copper, stainless steel,90/10 and 70/30 Cu-Ni.   Double Tube Heaters = Indirect Cylinder   Double tube heaters have replaced annular heaters. Whilst retaining low primary pressure drops and double sided heating surfaces, double tube heaters are of a much stronger construction. The heater is manufactured from pairs of concentric copper tubes and the primary water circulates through the annular spaces with collection headers at the top and bottom of the assembly.   By varying the length and number of tubes a wide range of heating surfaces can be fitted using standard components to construct the different headers. The secondary water is heated by natural convection with an added boost to the water passing the inner tube. The overall heat transfer rate is considerably greater than that achieved by a single annular heater and recovery rates in the order of 20 minutes can be achieved. Double tube heaters are generally used for low pressure applications where the removal of the heater is not required.   Copper Coil   Generally produced from a single tube formed into a helical coil and can operate at a greater pressure than a double tube exchangers. Unfortunately as the cylinder size increases the length of heating coil becomes disproportionately greater and this heater is therefore only practical for moderate size cylinders. The single coil is particularly useful for small flow rates with a large temperature drop such as those found in waste heat recovery and solar heating installations. Double coils are available for low pressure drop applications. Coils are able to withstand high working pressures. They can be safely used for high temperature water systems operating up to 200°C and in small cylinders for high pressure steam applications   Plate Heat Exchangers   Plate Heat Exchangers are compact and assembled from pressed stainless steel plates. Standard material for plates is 316L stainless steel. The plates are held in the exchanger by two methods, brazed and gasketted.   In brazed exchangers the stainless steel plates are copper brazed together to form a very compact and economic design suitable for pressure and temperature limitations 30 Bar g, 185°C. Gasketted plate exchangers use a gasket to seal the plate gap.   The gasket is glued to the plate. The plates can be easily removed for cleaning or maintenance. Maximum design pressure and temperature is dependent upon the frame rating, plate thickness and type of gasket selected. The plate exchanger offers the user several advantages.   In areas where maintenance space for 'U' tube withdrawal is limited then a plate heat exchanger offers a practical alternative. A plate heat exchanger can be serviced without any special tools or requiring heavy lifting tackle. If at a later date the design duty has increased then the plate pack can be easily extended by the addition of plates to increase the output for gasketted unit or replaced by a brazed unit with a larger plate pack. U-tube batteries, double tube and coil heaters rely on hot water convection currents to distribute the hot water within the storage volume. Plate heat exchangers will require a pump to circulate water from the storage volume and through the exchanger. A plate heat exchanger coupled with a pump on the cylinder side can offer an economic high output calorifier.

• Size: 4 inch
• Inlet Temperature: 260 Degree Celsius
• Country of Origin: Made in India
• Surface Finish: Polished

We are the leading manufacturers of Tube bundle heat exchanger in India and available in a variety of designs and materials of construction. makes three different models of tube bundle heat exchangers Which are designed for either horizontal or vertical use and Water Makers are made up of U tube Heat Exchangers. We manufacture the Cross flow tube bundle heat exchangers are often used in highly fouling environments such as lignite utility boilers.

We offer Finned Tube Heat Exchangers, which are designed as per the international standards and requirements of the clients. These Finned Tube Heat Exchangers can be employed for cooling or heating of air or other gases which flow in a duct or cooling of water and other liquids using air. Also, these Finned Tube Heat Exchangers are provided with Aluminium extruded finned tubes. These Finned Tube Heat Exchangers are manufactured with copper, aluminum, stainless steel, admiralty brass, cupro-nickel or carbon steel. Apart from this, these strongly constructed Finned Tube Heat Exchangers are widely used in different applications like air laden with abrasive particles, corrosive fluids and air heating with steam and designed for special custom-built applications. Highlights Rugged construction Corrosion resistant Available with customization High durability Low maintenance cost Trouble-free operation Industrial Applications Food processing Textile SugarDrier Manufacturing Cement plants

• Certification: CE Certified, ISO 9001:2008 Certified
• Application: Oil Refineries
• Sizes: 3" to 36" Diameter; 24" to 360" Length (available in 12" Increments)
• Shells: Carbon Steel or Stainless Steel
• Tubes Diameter: 3/8", 5/8", 3/4"
• Baffles: Precision Punched Carbon Steel, Brass, Stainless Steel
• Heads: Channels and Bonnets Available in Steel
• Flow: Available in 1-pass and 2-pass Designs

We are offering Plate-fin heat exchanger is one of the most efficient compact heat exchanger. The gaps between constitute a fluid layer. A core is made of a great number of layers. The exchanger can be made of one or more cores. The number of plate and fin layers, the size of the plates and fin, the height of the fin and the type of fin are engineered for optimum performance. The core is assembled (stacked) and typically held together by tack welding a weld rod to the top and bottom layer of the core. The stacked core is then placed within a fixture that exerts force on the individual pieces to keep them in contact. The part is then vacuum brazed in an environmentally-controlled room to ensure high quality and reliability. After brazing the core is typically heat treated or aged in order to increase its strength. Manifold ducting and mounting brackets are then welded in place as required, and any required paint or coating can be added.

We offer an exclusive series of Shell & Tube Heat Exchangers that are efficient to handle high pressure and temperature applications. These types of Exchangers find uses in various industrial applications. High capacity and tensile strength is the effective features of our Shell Tube Heat Exchanger. These Heat Exchangers are available in various grades and designs. Moreover, we can offer customized designs of Industrial tube Heat Exchanger. Consequently, we are well-reckoned in the market as one of the most prominent Shell Tube Heat Exchanger Manufacturers in the country. We offer these Heat Exchanger at most discounted prices. Accordingly, we are recognized as one of the most prominent Industrial tube Heat Exchanger Suppliers, based in India.

• Brand Name: gireesh

We are offering fixed tube sheet heat exchangers. A fixed tube sheet heat exchanger is the most common type of heat exchanger in all industries. Mostly used in higher-pressure and higher temperature applications. fixed tube sheet heat exchangers are the one that are very much used in process chemical industries and refinery services, as there is absolutely no chance for intermixing of fluids. This type of heat exchanger is employed where even slightest intermixing of fluids cannot be tolerated. A fixed-tubesheet heat exchanger has straight tubes that are secured at both ends to tube sheets welded to the shell. The construction may have removable channel covers , bonnet-type channel covers , or integral tube sheets. The principal advantage of the fixedtubesheet construction is its low cost because of its simple construction. In fact, the fixed tube sheet is the least expensive construction type, as long as no expansion joints required. specifications : the fixed tube sheet design consists of two stationary tube sheets attached to the shell. The bundle of straight tubes is connected between the tube sheets and contain baffles to direct the flow around the tubes in order to generate the required heat transfer. A head assembly is attached to each tube sheet.

Fixed Tube Sheet Heat Exchanger Materials: Stainless Steel, Copper Alloys. Other material options as available.   Fixed Tube Sheet Heat Exchanger Advantages Provides multi-tube-pass arrangements, Easy to cleaning and maintenance It has a Less cost than removable bundle heat exchangers, Provides maximum heat transfer surface per given shell and tube size. Ease of single tube replacement Provides multi-tube-pass arrangements. Fixed tube Sheet Heat Exchanger Applications Higher-pressure and Higher Temperature applications. It is used as a coolant for oil Hydraulic Fluid and oil in engines, Transmissions and hydraulic power packs. For heating or cooling oil, Water and chemical process fluids.

C Equipments Pvt Ltd Offer the below types of shell and tube heat exchangers:   JC Fixed Tube Sheet Heat Exchanger JC Removable Tube Bundle Heat Exchanger JC Vertical Shell and Tube Heat Exchanger JC Stainless Steel Shell and Tube Heat Exchanger JC U Tube Bundle Type Heat Exchanger   JC Fixed Tube Sheet Heat Exchanger India We manufacturer of Fixed Tube Sheet heat exchanger in India as per your requirement and as per the market standards. This JC FIxed Tube Sheet heat exchanger is useful for hight pressure and high temperature based applications. Also for chemical industries and all refinery units are using our Fixed Tube shee heat exchanger. This type of heat exchanger is employed where even slightest intermixing of fluids can not be tolerated. The inside tube sheets are fixed as its name implied. JC Removable Type Tube Bundle Heat Exchanger India JC equipments manufacturer Removable type tube bundle heat exchanger in India for the past 23 Years. Experienced designing team and manufacturing team is added strength for our company. Send your requirement and specification to get our best design for your removable type heat exchanger. Its is easy for maintainence ie., cleaning of removable type is quite easy. We use rubber rings to seal the shell side and tube side. JC Vertical Shell and Tube Heat Exchanger We are the leading manufacturers of Vertical Shell and Tube Heat Exchanger in India.A Vertical Shell and Tube Heat Exchanger is the most common type of heat exchanger in all Industries. Mostly used in higher-pressure and Higher Temperature applications. JC Stainless Steel Shell and Tube Heat Exchanger JC Equipment also manufacturer Stainless Steel Shell and Tube Heat Exchanger in India as per your requirements.As name implied the Stainless steel heat exchanger that is composed of stainless steel. Send your details application and requirement to get our best design for your steel type heat exchanger. Shell and Tube Heat Exchanger Design:   JC Equipments Coimbatore India design Shell and Tube Heat Exchangers by two major types. Thermal Design for Shell and Tube Heat Exchanger Mechanical Design for Shell and Tube Heat Exchanger   Shell and Tube Heat Exchanger Application:   During the manufacturing process industries are in need of heat exchangers to transfer or the heat by using many types. The shell and tube heat exchanger is specially design and suites for higher-pressure applications.   Shell and Tube Heat Exchanger for Power Plants – Condensers, Pre Heaters, Waste water treatment Shell and Tube Heat Exchanger for Oil Refineries – Inter cooling Purpose, Re Processing Purpose, Shell and Tube Heat Exchanger for Manufacturing Industries – Oil coolers for Quenching Oil Oil coolers for Lubrication Oil Offshore Industry Water Makers Condensers, Power Plants – Chillers and Water Coolers Food and Dairy Industries, Refrigeration systems, Pulp and Paper Industries, Wine-brewery industry, plastic and Fertilizers Industries   Shell and Tube Heat Exchanger Standards:   We manufacture Shell and Tube Heat Exchanger equipments asper the TEMA [Tubular Exchanger Manufacturers Association] standards, ASTM section(VIII)(unfired pressure vessuls), is-4503, is-6088 standards. And asper bs, din standard's and is 2825 is 6088 codes.   Shell and Tube Heat Exchanger Quality : JC Equipments having its quality control department [QC Control] testing of all its Shell and Tube Heat Exchanger.   Problem and Trouble shooting Shell and Tube Heat Exchanger: JC Equipments are well explained the Trouble shooting of Shell and Tube Heat Exchanger.

• Brand Name: JC Brand

We JC Equipments Pvt Ltd take Pleasure to Introduce Ourselves as one of the leading Designers, Manufacturers & Exporting of all kind of Cooling Towers,Heat Exchangers Pressure Vessels Columns, Storage Tanks, Air Cooled Condensers, etc... in India. JC Equipments Pvt Ltd started in the Year of 1989. We have wide knowledge in this field and we have Regular customers throughout the world. We are AUTHORIZED MANUFACTURERS OF ASME and we have “U, S & R” Stamp Certification also. We are CORPORATE MEMBER OF CTI, USA. We are a WORLD CLASS MANUFACTURERS and we never compromise in Quality. We assure Our Product will be best quality and competitive price. Herewith we have enclosed the product profile for your kind reference. Kindly refer the attachment. Looking forward your valuable enquiry for us to quote our best and competitive offers, with assuring you of our best quality and prompt service at all times.

JC Equipment also manufacturer Stainless Steel Shell and Tube Heat Exchanger in India as per your requirements. As name implied the Stainless steel heat exchanger that is composed of stainless steel. Send your details application and requirement to get our best design for your steel type heat exchanger.     Shell and Tube Heat Exchanger Design:   JC Equipments Coimbatore India design Shell and Tube Heat Exchangers by two major types. Thermal Design for Shell and Tube Heat Exchanger Mechanical Design for Shell and Tube Heat Exchanger   Shell and Tube Heat Exchanger Application:   During the manufacturing process industries are in need of heat exchangers to transfer or the heat by using many types. The shell and tube heat exchanger is specially design and suites for higher-pressure applications.   Shell and Tube Heat Exchanger for Power Plants – Condensers, Pre Heaters, Waste water treatment Shell and Tube Heat Exchanger for Oil Refineries – Inter cooling Purpose, Re Processing Purpose, Shell and Tube Heat Exchanger for Manufacturing Industries – Oil coolers for Quenching Oil Oil coolers for Lubrication Oil Offshore Industry Water Makers Condensers, Power Plants – Chillers and Water Coolers Food and Dairy Industries, Refrigeration systems, Pulp and Paper Industries, Wine-brewery industry, plastic and Fertilizers Industries   Shell and Tube Heat Exchanger Standards:   We manufacture Shell and Tube Heat Exchanger equipments asper the TEMA [Tubular Exchanger Manufacturers Association] standards, ASTM section(VIII)(unfired pressure vessuls), is-4503, is-6088 standards. And asper bs, din standard's and is 2825 is 6088 codes.   Shell and Tube Heat Exchanger Quality : JC Equipments having its quality control department [QC Control] testing of all its Shell and Tube Heat Exchanger.   Problem and Trouble shooting Shell and Tube Heat Exchanger: JC Equipments are well explained the Trouble shooting of Shell and Tube Heat Exchanger.   Nano Technology on Shell and Tube Heat Exchanger : We are closly watching this technology and will be adapted for our existing clients as upgradation of Shell and Tube Heat Exchanger.  

• Size: 5 Inches
• Type: Plate Heat Exchangers
• Shape: Round
• Certification: ISO 9001:2008 Certified
• Condition: New

Shell and Tube Heat Exchanger, Plate Type Heat Exchanger