United Cooling Systems P.Ltd SIDCO Industrial Estate, Coimbatore, Tamil Nadu

Air-cooled heat exchangers are in universal used where a process categorization generates heat which must be uninvolved, but for which there is no local use. A good example is the radiator in your car. The engine mechanism must be cooled to keep them from overheating due to fighting and the combustion process. The water/glycol coolant mixture carries the excess heat away. The car's radiator to heat the inner may use a small amount of the excess heat. Most of the heat must be dissipated somehow. One of the simplest ways is to use the ambient air. Air-cooled heat exchangers (often simply called air-coolers) do not have need of any cooling water from a cooling tower. They are usually used when the opening temperature is more than about 20 deg. F above the maximum expected ambient air temperature. They can be used with closer approach temperatures, but often become expensive compared to a combination of a cooling tower and a water-cooled exchanger.

Vertical Shell in opposite directions. These are used for liquid-liquid, condensing and gas cooling applications. Units are usually mounted vertically when condensing vapour and mounted horizontally when handling high concentrations of solids.  

U-Tube Heat Exchanger can be many variations on the shell and tube design. Typically, the ends of each tube are connected to plenums through holes in tubesheets.  

A heat-exchanger system consisting of a bundle of U tubes (hairpin tubes) surrounded by a shell (outer vessel); one fluid flows through the tubes, and the other fluid flows through the shell, around the tubes.Multitherm can duplicate any existing bundle to include dimensions, materials and performance. We can build "U" tube bundles, straight tube "floating" tube bundles, or we can retube fixed tube sheet heat exchangers when the bundles is not removable. multitherm is not locked into any one material. Most bundles tend to be build with copper tubes and steel tube sheets.In nuclear power plants called under pressure water reactors, large heat exchangers called steam generators are two-phase, shell-and-tube heat exchangers, which typically have U-tubes. They are used to boil water recycled from a surface condenser into steam to drive a turbine to produce power.

A Fixed Tube Sheet heat exchanger is the most universal type of heat exchanger in all Industries. Frequently used in higher-pressure and Higher Temperature applications. Fixed tube Sheet heat exchangers are the one that are very much used in procedure chemical industries and refinery services, as there is absolutely no chance for intermixing of fluids. This type of heat exchanger is functioning where even slightest intermixing of fluids cannot be tolerated. A Fixed-tubesheet heat exchanger has straight tubes that are protected at both ends to tube sheets welded to the shell. The structure may have detachable channel covers, bonnet-type channel covers, or integral tube sheets. The principal advantage of the ?xed tube sheet construction is its low cost because of its simple construction. In fact, the ?xed tube sheet is the least expensive construction type, as long as no expansion jointis required.

Tube Bundle Heat Exchangers are often baffles directing flow through the shell side so the fluid does not take a short cut through the shell side leaving ineffective low flow volumes.  

Tube Bundle Heat Exchangers companies however do not use single pass heat exchangers because they can break easily in addition to being more expensive to build.

Transformers range in size from thumbnail-sized units hidden inside microphones to units weighing hundreds of tons interconnecting the power grid. A transformer is a static electrical device that transfers energy by inductive coupling between its winding circuits.  

Oil Coolers are often baffles directing flow through the shell side so the fluid does not take a short cut through the shell side leaving ineffective low flow volumes. Oil Coolers are generally attached to the tube bundle rather than the shell in order that the bundle is still removable for maintenance.

OZAIR TRADELINK large and varied inventory of titanium mill-product forms such as plate,sheet,coil,strip,foil,billet,bar and wire.Our material is of prime quality and is fully certifiable to orthopedic(ASTM F-136,F167 and F1472),aerospace (AMS, Mil-T) and industrial specifications (ASTM and ASME).we has having experienced operators that deal with complex operations such as titanium machining and titanium processing.Huge Titanium sheets stockiest and suppliers in india

OZAIR TRADELINK Steels TITNIUM Alloys stocks a large and varied inventory of titanium mill-product forms such as plate, sheet, coil, strip, foil, billet, bar and wire. Our material is of prime quality and is fully certifiable to orthopedic (ASTM F-136, F167 and F1472), aerospace (AMS, Mil-T) and industrial specifications (ASTM and ASME). Supra Alloys has experienced operators that deal with complex operations such as titanium machining and titanium processing.

Coil Type Heat Exchanger air-to-air heat exchange through evaporator units similar to those used for air conditioners. Coil Type Heat Exchanger applications, the film is composed of iron. Coil Type heat exchanger condensers, duplex tubes consisting of an inner titanium layer with outer copper-nickel alloys are employed.

Stainless steel is a corrosion resistant steel alloy with a minimum of 10.5% chromium. There are different grades and surface finishes of stainless steel produced to accommodate the environment in which the material will be implemented. Unlike carbon steel, stainless steel does not rust when exposed to air and moisture due to the sufficient amount of chromium present.

Water Heat Exchangers that use steam-driven turbines commonly use heat exchangers to boil water into steam. All fossil-fueled and nuclear power plants using steam-driven turbines have surface condensers to convert the exhaust steam from the turbines into condensate water for re-use.Water Heat Exchangers large power plants with steam-driven turbines, shell-and-tube surface condensers are used to condense the exhaust steam exiting the turbine into condensate water which is recycled back to be turned into steam in the steam generator.

Stainless steel's resistance to corrosion and staining, low maintenance and familiar lustre make it an ideal material for many applications. There are over 150 grades of stainless steel, of which fifteen are most commonly used. The alloy is milled into coils, sheets, plates, bars, wire, and tubing to be used in cookware, cutlery, household hardware, surgical instruments, major appliances, industrial equipment (for example, in sugar refineries) and as an automotive and aerospace structural alloy and construction material in large buildings. Storage tanks and tankers used to transport orange juice and other food are often made of stainless steel, because of its corrosion resistance and antibacterial properties. This also influences its use in commercial kitchens and food processing plants, as it can be steam-cleaned and sterilized and does not need paint or other surface finishes.

Sheet metal is metal formed by an industrial process into thin, flat pieces. It is one of the fundamental forms used in metalworking and it can be cut and bent into a variety of shapes. Countless everyday objects are constructed with sheet metal.

Stainless steel of threaded joints may be lubricated to prevent galling. Because of the durability of the material, many of these buildings retain their original appearance. Stainless steel reduce the tendency to gall through selective alloying with manganese and nitrogen. Stainless steel of this is the upper portion of the Chrysler Building pictured. Some diners and fast-food restaurants use large ornamental panels.

Our products have increased high quality standard among customers for the time arrangements and utility give by these things. We always monitoring that the quality parameters for these stainless steel forge fittings products are of strngthen nature and testing is performing behaving inflexible measures.

Our products have increased high quality standard among customers for the time arrangements and utility give by these things. We always monitoring that the quality parameters for these stainless steel forge fittings products are of strngthen nature and testing is performing behaving inflexible measures.

Stainless steel is used for buildings for both practical and aesthetic reasons. Stainless steel was in vogue during the art deco period. stainless fixtures and furniture. for example bronze and stainless steel, or even different types of stainless steels martensitic against austenitic, when metal-to-metal wear is a concern. Nitronic alloys reduce the tendency to gall through selective alloying with manganese and nitrogen. Additionally, threaded joints may be lubricated to prevent galling. Because of the durability of the material, many of these buildings retain their original appearance.

Shell and Tube Heat Exchanger which typically have U-tubes. One fluid runs through the tubes, and another fluid flows over the tubes to transfer heat between the two fluids. They are used to boil water recycled from a surface condenser into steam to drive a turbine to produce power. Most shell-and-tube heat exchangers are either pass designs on the tube side. The Shell and Tube Heat Exchanger can be either liquids or gases on either the shell or the tube side.

United Heat Exchangers is one of the largest Heat Exchanger Manufacturer in INDIA. This company is established in the year of 1989. Our range of products includes Air Cooled Heat Exchanger, Shell Tube Heat Exchanger, Finned Tube Heat Exchanger, Plate Type Heat Exchanger,  

Reboilers are heat exchangers characteristically used to make available heat to the bottom of manufacturing refinement columns. They boil the liquid from the foundation of a distillation column to generate vapors, which are returned to the article to drive the distillation separation. Appropriate reboiler operation is vital to effective distillation. In a typical classical distillation column, the entire vapor driving the separation comes from the reboiler. The reboiler receives a liquid stream from the article bottom and may partially or completely vaporizes that stream. Steam frequently provides the heat required for the vaporization.Kettle reboilers are very simple and dependable. They may necessitate pumping of the column bottoms liquid into the kettle, or there may be sufficient liquid head to deliver the liquid into the reboiler.

Pressure Vessel Heat Exchanger varies with the tank shape but depends on the density, ?, and maximum allowable stress of the material in addition to the pressure P and volume V of the vessel. Therefore pressure vessels are designed to have a thickness proportional to the radius of tank and the pressure of the tank and inversely proportional to the maximum allowed normal stress of the particular material used in the walls of the container.