Water Pumps Dealers in Anna Nagar, Coimbatore

We are offering solar water pumping system for agriculture industry made accessible by us in the business, is generally known to be among the finest that are accessible in the business sector. Its eco agreeable nature, limit, quality and execution, is exceedingly lauded. Notwithstanding this, the offered extent, with exceptionally institutionalized quality, is stamped at the most sensible rate conceivable. Features: user friendly commendable performance high precision

Features ● KEERTHI PUMPS are designed special for portable application.● Fully automatic priming systems allow the pump prime and re-prime while running.● Vacuum pump driven by common prime mover through belt drive arrangement.● Fully guarded coupling, pulley and belting● All pumps are fitted with Mechanical seal● Heavy duty flexible tyre coupling between prime mover and pump for reliable service● Nitrle non return valve used only a single moving part to allow full flow with minimal restrictions● Total assembly is designed with a focus on facilitating modular type replacement of components / equipment, to ensure zero down time● Highway trailer with 150 litre integral fuel cell / chassis is standard● Rugged lifting bale for easy, balanced hoisting is standard for all models.

• Capacity: Up to 550 M³/Hr
• Head: Up to 100 Mtrs (328 Feet)
• Temperature: Up to 90°C (194°F)
• Casing Pressure: Up to 16 Kg / cm²
• Speed: Up to 3600 rpm
• Direction of rotation: Clock wise from Drive End
• No of models: 37 Models

Wp type pumps are used in air â�� condition plants, fire fighting applications, food process industry, sugar industry, paper & pulp industry, dyeing industry, steel plants, sea water desalination plants, power stations and absorption plants in environmental engineering & dewatering purpose. Handling of all types of clear â�� non aggressive liquids, condensate water up to 90â°c, irrigation, general water supply in agriculture & etc. Horizontal back pull out design pumps. Closed impeller construction with two deep groove ball bearing and designed in accordance with the flange standards of din 2533 ansi b 16.5 bearings are grease lubricated and oil lubrication is optional. Salient features back pull out design - steady flow - high efficiency - sturdy construction - low npsh - noise & maintenance free - environment friendly - shaft deflection below 0.05mm - bearing life â�� more than 17000 operating hours* material of construction graded cast iron, 2% nici, bronze, wcb, ss 304 & ss 316 operating range capacity : up to 550 mâ³hr head : up to 100 mtrs (328 feet) temperature : up to 90â°c (194â°f) casing pressure : up to 16 kg cmâ² pump size : dn 32 mm to dn 150 mm speed : up to 3600 rpm direction of rotation : clock wise from drive end no of models : 37 models

• Material: Stainless Steel
• Usage/Application: Water Pump
• Surface Finish: Polished
• Brand: Asppice
• Number Of Blades: 7

• Country of Origin: India
• Application: Sewage, Industrial, Domestic, Agriculture
• Color: MUlticolor
• Fuel: Electric
• Automatic Grade: Automatic, Manual
• Warrenty: 2 Years
• Certification: ISO 9001:2008
• Theory: Centrifugal Pump
• Pressure: High Pressure
• Structure: Multistage Pump
• Brand Name: Sharp suguna
• Number Of Stages: Multi Stage Pump
• Discharge Range: 500-1000 LPM
• Type: Submersible Pumps
• Motor Phase: Single Phase
• Maximum Discharge Flow: 1001 - 5000 LPM
• Power: 2 HP
• Power Source: AC Powered
• Warranty: 24 Months
• Voltage: 220V
• Discharge Outlet Size: 1 To 2 In
• Material: SS grade
• I Deal In: New Only

The comprehensive range of End Suction Pump offered by us is sourced from well-known organization Mather & Platt, who holds rich industry experience in the respective domain. They ensure to manufacture these pumps in tandem with the set industry standards using high grade raw material. These End Suction Pumps are widely demanded in numerous industries for trouble free performance, higher efficiency and low power consumption owing to the better hydraulics. Further, these are also known for their high casing pressures and wide range of functions. Specifications: * Range:Capacities Heads: Up to 750 nrVhr. : Up to 170 m can be supplied in bothhorizontal and vertical configurations * Metallurgy:Available in Cast Iron / onze combinations Application Areas: * Air Conditioning Plants * Building Services * Fire Fighting Systems * Irrigation / Sprinkler Systems * Paper Mills * Pharmaceuticals * Sugar Mills * Water / Effluent Treatment * Water Supply * General Purpose Requirements * Vegetable oil mills.

• Country of Origin: Made in India
• Cooling Method: Air Cooled
• Material: Cast Iron
• Motor Horse Power: 1 HP
• Power Source: Electric
• Type Of End Use: Industrial
• Stages: Single Stage

• Color: MUlticolor
• Application: Industrial, Domestic, Agriculture
• Voltage: 380V
• Type: Open Well Submersible Pump
• Fuel: Solar, Electric
• Theory: Centrifugal Pump
• Structure: Single Stage Pump
• Warranty: 1year
• Country of Origin: India
• Head: 10 -50 metre
• Warrenty: 1 Year
• Motor Phase: Three Phase
• Maximum Rotational Speed: 2880
• Number Of Stages: 1
• I Deal In: New Only

• Voltage: 220 V
• Material: Cast Iron
• Phase: Single Phase
• Automation Grade: Semi-automatic
• Frequency: 50 Hz
• Is It Portable: Portable
• Brand: Cactus
• Series: CPJET

Submersible pumps & motors are well known for its quality, reliability & excellence for all type of service purpose.this pumps are manufactured under supervision of highly qualified technical team with a stage wise rigid inspection procedure.

• Features: Compact design ,Low maintenance, Easy to install

We are the leading manufacturers, exporters and supplier of this products.

• Material: Stainless Steel
• Type: Semiclosed
• Impeller Blade Type: Backward-curved
• Impeller Diameter: 5-8 inch
• Usage/Application: Water pump

• Max Flow Rate: Max 90 lpm
• Head: Max 30 m
• Suction Lift: up to 7 m
• Liquid Temp: upto 50° C
• Motor: 2 pole Induction motor
• single phase: 230 v +5% -15%

Application:   Domestic Water SupplyHome Pressure BoostingGarden/FountainsOver Head TanksConstruction SiteFeatures and Benefits:   Cast Iron Casing and BraketBrass/Stainless Steel ImpellersStainless Steel ShaftBuilt in Winding ProtectorInsulation Class F/B

Salient Features Water lubricated thrust bearings for high axial load Carbon bushes on both sides for less friction and better motor efficiency Carbon thrust bearings at both driving and rear end for high efficiency and performance Shaft and all fasteners are stainless steel 410 Grade Superior quality Nitrile pressure adjusting diaphragm for motor safety Vertical Open well pumps for high head requirements High graded oil seals to prevent sand entry in to the motor Epoxy coated machined component Application Hotels, Hospitals and Apartments Gardening & Fountain Domestic and Minor irrigation Performance Table

The heavy duty centrifugal design of the water pump makes it suitable for all liquor applications in the pulp and paper industry. It is also suitable for pumping condensate and general water supply in agriculture, trade and industries with favourable NPSH condition.

• Motor Capacity :: 0.5HP 1.0 HP & 1.5 HP (240V, 50 Hz Single Phase AC Supply)
• Speed :: 2880 RPM
• Head Range :: 5 mtrs to 25 mtrs
• Discharge Range :: 20 Lpm to 650 Lpm
• Pipe Size in mm :: 32 x 25 40x40

VIKRAM’s Single Phase open well Submersible Pumps similar to ASM type pumps in design but operated with sinle phase supply are ideally suitable for domestic under water applications.

• Size: 400 mm
• Capacity: 2000m³/hr

As the name suggests, slurry pumps are designed to handle liquids containing abrasive and coarse grained solids. It has a heavy duty design with a single stage axial inlet. It is also suitable for sand water mixtures and other related slurry.

• Number Of Stages: Multi Stage Pump
• Motor Horse Power: 2 HP
• Brand Name: LPC
• Application: Domestic
• Type: Borewell
• Motor Phase: Single Phase
• Head: 15 to 50 m
• Power Source: Electric

We are the leading manufacturers, exporters and supplier of this products.

We are offering submersible pumps. Submersible pumps all hp's from 30 mtrs to 300 mtrs range

• Brand Name: Sri SHAKTHI PUMP
• Head: 20 meters
• Max Flow Rate: 70LPM
• Model: V4 veritical sub.

Power Range (H.P) : 1.5HP to 3HP: (200/240 V,50Hz, A.C 1PHASE: 3 HP To 40 HP: 300/350/380/415V, 50Hz, A.C, 3PHASE)Speed : 2880rpm Discharge Range : 45LPM to 1260 LPM/2.7m3/h to1214ftDelivery size in mm : 25, 32, 40, 50, 65, 80&100mm Product Feature * We care about our client sales situation.* Our products quality is excellent.* Delivery quickly.* Beautiful and strong packing.* Good water pumps finishing.* Perfect quality control system.* Best raw-material quality.* Good service.

We at USL puts the sun to work for you. We are a leader in the solar power industry and supply only the highest quality equipment and craftsmanship. No matter what your project is big or small, we can assist you with initial design to final construction. We have the highest quality solar powered water pumping systems guaranteed. Even before the push for a greener living, USL has been helping companies and individuals utilize the sun's power for many different applications. Not only is solar energy more environmentally friendly, but the overall energy costs are outstanding. Lower your company's overhead or household bills with a fully functional solar power system.

Transfer a wide range of nonabrasive or nonparticulate viscous liquids with a continuous, near-pulseless flow in many industrial, commercial, marine, or agricultural applications. All have keyed shafts, a seal flush chamber. Cast-iron and bronze models have pressure relief valves. Ball bearings allow use with pulley-drive systems. Note: Higher-viscosity liquids (100,000 SSU) must be transferred with more horsepower at reduced speeds.

a good dewatering solution is important to the smooth operation of any mine. We at elevaq engineering understand this and custom build each dewatering pump to suit your mine. Our ad series of auto-priming diesel driven pump units offer simple and reliable operation and easy maintenance.   our dewatering pumps have been used for six years in india and abroad. features   ·       auto-priming pump system ·       9m maximum suction lift ·       integrated fuel tank and towing system ·       rugged construction ·       simple operation and easy maintenance ·       kirloskar diesel engine ·       wide selection of pumps to suit any need ·       anti corrosive primer and scratch resistant paint

• Power: 0.5 to 20 H P
• Power Source: Solar
• Type Of End Use: Agricultural
• Frequency: 50Hz
• Country of Origin: Made in India
• Product Type: AC Pump
• Automation Grade: Automatic
• Phase: Single Phase & Three Phase

• Color: Red
• Capacity: 50 liter tank

Ideal openwell submersible (Horizontal) monoblocs are designed water filled, water cooled & lubricated pumpset for continuous running and long life.Pump volute casing & Impellers’s users,designed for high head & flaw in smooth flow without overloading the motor.The Electrical Stampings are low & watt loss grade for lower power consumption and with stand wide voltage ranges.Housing Brushes are made by head Tin Bronze grade motor shaft non corrosive stainless steel.Rotor with copper strip Brazzed for Higher Tourane & low voltage Running. Single phase & Three Phase/240v/415v/50 HZ.2880 rpm.

Submersible pumps, Centrifugal Pumps, Electric Motors