Displacement Transducers Dealers

• Material: Aluminum
• Feature: Durable
• Voltage: 13.5-30 VDC
• Frequency: 50hz
• Warranty: 1 Year
• Length: 50- 1000 mm
• Resolution: Infinite

The Vibrating Wire Displacement Transducer Model SIS 8000 Series is used to measure linear displacements in borehole extensometers, Joint Meters or crack meters. It is ideally suited for applications involving transmission of electronic signals over long distances where other types of transducers based on resistance strain gages or potentiometers cannot be used. The linear displacement between the plunger and the body of the transducer is converted into a stable frequency signal by a vibrating wire transducer.  

• Material: Stainless Steel
• Feature: Accurate Results, Durable, Excellent Performance, High Quality
• Frequency: 50hz, 60hz
• Power: Electric
• Warranty: 3yrs
• Length: 50- 1000 mm

• The transducer has been improved in order to guarantee greater reliability under all conditions • Mechanical linkage using joint with take up of play, M5 thread • Installation is made simpler by the absence of electri- cal signal variation in output, outside the Theoretical Electrical Stroke • The new grooves provide an excellent alternative to the usual system of fastening with brackets • Ideal for applications on plastic injection presses, vertical presses, and on many other processing machines • Grade of protection IP40

This set up is designed to study of strain gauge utilizationas displacement measuring transducer. The set up consists a strain gauge bridge with small cantilever, micrometer for displcement, the signal conditioner circuit and a digital display calibrated for displacement measurment. The set up have its own inbuilt regulated dc supplies.

• Standard Ranges: 50mm, 100 mm , 150mm.
• Non-linearity %fs: 1%fs
• Material (outer body): Stainless steel
• Operating Temperature: -10 to 50°C
• Coil Resistance: 140 – 160 Ohm @ 25°C
• Thermistor: YSI 44005 or equivalent (3k Ohm @ 25°C)
• Surge Arrestor: Citel 90V Gas Discharge tube
• Cable: 1m , 4 core shielded.
• Dimension: 16 mm dia

• Application: Position Sensor
• Material: Anodized aluminium , Stainless Steel
• Packaging: Packed in corrugated boxes

Details : The transducer has been improved in order to guarantee greater reliability under all conditions Mechanical linkage using joint with take up of play, M5 thread : Installation is made simpler by the absence of electri- cal signal variation in output, outside the TheoreticalElectrical Stroke : The new grooves provide an excellent alternative to the usual system of fastening with brackets Ideal for applications on plastic injection presses, vertical presses, and on many other processing machines Grade of protection IP40 Data : Useful electrical stroke (C.E.U. 100/130/150/175/200/225/250/300/350/360/400/450/500/600/700/ 750/850/900/1000/1250/15001750/2000 Independent linearity ± 0,05% (within C.E.U.) Resolution infinite Repeatability 0.01 mm Electrical connection PK M - DIN43650 4-pin connector PK B - DIN43322 5-pin connector Protection IP40 Displacement speed ≤ 10m/s Displacement force ≤ 1.2 N

The Model 4450 Displacement Transducer provides remote readout capability for borehole extensometers. They are particularly useful where other types of vibrating wire sensors are used andor for installations where long cable runs are required. The Model 4450 can also be installed between borehole anchors, in conjunction with the requisite length connecting rod, to provide a permanent, in-place incremental extensometer.

• Standard Ranges¹: 12.5, 25, 50, 100, 150, 200, 250, 300 mm
• Resolution: 0.025% F.S.
• Accuracy²: ±0.1% F.S.
• Nonlinearity: <0.5% F.S.
• Temperature Range¹: −20°C to +80°C
• Lengths³ × Coil Diameter: 210, 217, 297, 409, 526, 593, 681, 814 mm × 19 mm

The Model 4450 Displacement Transducer provides remote readout capability for borehole extensometers. They are particularly useful where other types of vibrating wire sensors are used and/or for installations where long cable runs are required. The Model 4450 can also be installed between borehole anchors, in conjunction with the requisite length connecting rod, to provide a permanent, in-place incremental extensometer.

• Power: 12-30 VDC
• Material: Stainless Steel
• Transducer Type: Linear Displacement Transducer
• Brand Name: Ametek APT
• Part Number: 953 VMAX
• Mechanical Stroke: 1-300 Inch

Displacement transducers is ideal for use in single and mutipoint bore hole extensometers. Its unique slimline design is very convenient for multipoint bore hole extensometers as a number of sensors may be installed within a single hole. The sensor also finds application in soil extensometers and roof convergence measurement. It may even be used as a joint meter in some applications. Provision of gas discharge tube protects the sensor against surge and lightning. Displacement as joint and Displacement as Bore Hole extensometer.

The inductive displacement measurement principle has penetrated many sectors of industry and research because it is both robust and maintenance-free.   For years, HBM has gained experience in the field of inductive transducer technology and has been building inductive displacement transducers, which can be used universally for measuring displacement in conjunction with carrier frequency amplifiers.

Model distance measuring system b50 (0 162 146) for sliver monitor (dt59-d2f-m) with m12 sensor distance 0-2mm output 0-10v distance output mm volt 0.6 3.21 0.9 4.56 1.2 5.89.

• Brand Name: Deluxe Industrial
• Material: PVC
• Display: Digital
• Color: Grey
• Application Media: Any Liquid
• Speed of response: 5-ms

linear displacement transducers, safety switches sensors

displacement transducers, electrical power sensors, piezoelectric transducer

displacement transducers, Automotive Electronics, load transducers

displacement transducers, force sensors, force measuring instruments

displacement transducer, Analytical Instruments, Torque Transducer

displacement transducers, Barcode Scanner, Digital Panel Meter

Vibrating Wire Linear Displacement Transducer, Thermistor probe

lvdt displacement transducer, machine tool dynamometer, wind tunnel

displacement transducers, Contamination Sensor, Actuators

displacement transducer, compact geared motor, Thermal Detector

Spring Linear Displacement Transducer, Rodless Linear Transducers

lvdt displacement transducers, LVDT Laser Displacement Sensor