Steel Shot Abrasive Blasting Media Dealers

• Color: Silver
• Shape: Cylindrical
• Odor: Odorless
• Water Solubility: Insoluble
• Microstructure: Austenitic
• Hardness: HRC 40 - 50

STAINLESS STEEL CUT WIRE SHOTS No Ferrous Contamination: Ideal for blasting or peening stainless steel, titanium, aluminum, or other non-ferrous work objects; Increased Production: High reusability Rate: over 800 operating cycles, perfect for Blasting Rooms; Certified Product: MIL-S 13165C, SAE J441, AMS 2431/4; No Dust. Available in conditioned form with certification to meet: MIL-S 13165C: Military Specification 13165C - Shot Peening of Metal Parts; SAE J441: Society of Automotive Engineers J441 - Cut Wire Shot; AMS 2431/4: Aerospace Specification 2431/4 - Peening Media (AWS), Conditioned Stainless Steel Cut Wire Shot; Stainless steel cut wire shot with bright surface that are used for shot blasting, shot peering and deburring in non-ferrous metal and stainless steel products surface. The surface of work-pieces are smooth, no rust and highlight metallic luster after process. Applications: Prevents ferrous contamination when blasting or peening stainless steel, titanium, aluminum, or other non-ferrous work objects. The economic case for using stainless cut wire shot in peening and blast cleaning operations is quite easy to make: cut wire does not fracture or break down during use because it is a solid piece. Stainless Steel Cut Wire is made by cutting stainless steel wire into pellets, the length equal to the diameter of the wire. SUPERIOR QUALITY PRODUCT Our stainless steel cut wire shots offer the following advantages: Produces very bright surfaces and dust free surfaces Stainless steel cut wire shot has a significantly longer life than cast abrasives and carbon cut wire shot Dust generation is significantly lower – blasting operations are much cleaner Stainless steel cut wire shot produces excellent results because of its uniformity and strength It will make you a “Greener” organization because disposal of spent media will be significantly reduced (you won’t need as much shot, inventory requirements will be lower, and inbound freight will cost less.) You will NOT introduce ferrous contamination to non-ferrous castings or work objects as occurs with the use of cast steel or carbon cut wire shot No hollow, splits or twins STAINLESS STEEL CUT WIRE SHOTS APPLICATION     .   Surface finishing Obtain profile pattern Shot peening Shot blasting Our stainless steel cut wire shots is used in all impact treatments: Grit removal Pre treatment Rust removal Blast cleaning

• Size: 0-15mm, 15-30mm, 30-45mm
• Material: Carbon Steel, Stainless Steel
• Diameter: 0-10mm, 10-20mm
• Thickness: 0-5mm, 10-15mm
• Application: Binding Wire, Shot Blasting
• Feature: Corrosion Resistance, High Quality, High Tensile

Stainless steel cut-wire shot is used in important applications where non ferrous components like stainless steel, titanium, aluminum, are to be blasted and ferrous contamination is harmful to the component.

• Material: Stainless Steel
• Surface Finishing: Polished
• Color: Silver
• Application: Industrial
• Grade: 316
• Feature: Corrosion Resistance, Dimensional, Extra Stronger, High Quality, High Tensile
• Country of Origin: India
• Form: Granules
• Hardness: 50 HRC
• Available Sizes: 0.4mm to 2.5mm
• Packaging Type: 25 kg HDPE Bag

• Country of Origin: India

Steel Shot Steel Shot refers to spherical grain made of molten steel through an atomization (granulation) process, available in different sizes and hardness. Metal working industries are main users of steel shot such as ferrous and non ferrous foundries, steel mills, forging industries and sand removal to improve the metal surface preparation. With our quality we serve various industries like Automotive, Metallurgy, Aerospace and Petroleum Industries. Steel Shot is a general-purpose manufactured abrasive used to remove mill scale and molding sand. Its round shape cleans by hammering the surface, leaving a uniform surface profile. Steel Shot is most commonly used in wheel blast equipment and closed circuit blast systems for steel plate blasting, cleaning castings and forgings, and ship and railcar manufacturing and maintenance. With our quality we serve various industries like Automotive, Metallurgy, Aerospace and Petroleum Industries.  STEEL SHOT complies to SAE specification J444 and J827 as well as IS 4606 of 1983.  Chemical Composition -- Carbon: 0.80 - 1.20 % -- Silicon: > 0.40 % -- Manganese: 0.35 - 1.20 % -- Phosphorus: < 0.050% -- Sulphur: < 0.050%    General Appearance Steel Shot shall be as nearly spherical   Micro Structure The micro structure of steel shot shall be uniform martensite, tempered to a degree consistent with the hardness range with fine well distributed carbides if any.   Hardness - SAE standard -40-50 Hrc (Rockwell Hardness) - IS Standard - 400 -500 HV ( Vickers Hardness ) - Custom Hardness available on request    Density -Not less than 7.0 g/cc

• Material: Carbon Steeel
• Color: Grey
• Type: Cast Steel Shot
• Country of Origin: India
• Size: S-70 To 950
• Technique: Steel shots are used to clean heavy parts of metals such as engine turbine blades, crankshafts Etc.
• Material Grade: Mild steel

• Color: Black
• Feature: Corrosion Resistance, Extra Stronger, High Quality
• Surface Finishing: Polished
• Mn: 1.25 % max
• C: 0.6 % - 1.25%
• Si: 0.2 %-1.10%

• Size: 0-15mm, 15-30mm, 30-45mm, 45-60mm, 60-75mm, 75-90mm
• Type: Shots
• Material: Stainless Steel
• Diameter: 0-10mm, 10-20mm, 20-30mm, 30-40mm, 40-50mm, 50-60mm
• Shape: Round
• Application: Machinery Use
• Thickness: 0-5mm, 10-15mm, 5-10mm
• Color: Black
• Surface Finishing: Polished
• Feature: Accuracy Durable, Corrosion Resistance, Dimensional
• Technics: Black Oxide

• Material: C-0.45 To 0.85%, Mn-0.35 To 1.2%, Si- .015 To 0.35%
• Size: S-280, S-330, S-460, S-550, S-660

Cast Steel Shots are manufactured by liquid metal casting process. These are rounder in shape and have various sizes to suit the requirement. These are used For Shot Blasting of Iron And Steel Parts.    The Chemical Composition Is As Below : C-0.45 To 0.85%, Mn-0.35 To 1.2%, Si- .015 To 0.35%

• Material: Stainless Steel
• Shape: Round
• Application: Industrial
• Country of Origin: India
• Packaging Type: 25Kg

Stainless steel shot we are one of the leading manufacturers, exporters and suppliers of stainless steel shot. Stainless steel shot is produced by melting stainless steel scrap of different grades like 410, 430, 202 & 304 in the induction furnace. We are instrumental in offering superior quality stainless steel shots to our prestigious clients. Stainless steel shots used in an increasing number of important applications where ferrous contamination in blasting stainless steel, titanium, aluminum, or other non ferrous work objects could be harmful. Manufactured and sized to sae standards and specifications. We are recognized as a prominent trader, distributor and supplier of stainless steel, ferrous powder, non ferrous powder, copper powder, etc. Clients can avail a qualitative range of stainless steel shots. These products are manufactured as per sae standards and specifications. Our range is widely used in peening critical aircraft, automotive components, surface preparation of stainless steel and non ferrous components. Our cost effective range removes ceramic residue from investment castings, deburring and surface finishing of aluminium dia castings. These products are in huge demand in stainless steel and aluminium foundries.

Steel abrasive of Watch CaseBand,Glass frame accessories, Camera Parts, Stainless Steel Pipes, S.S. Cutlery, Brass decorative articles and Wooden Products.