Leela Global Exports Gms Road, Dehradun, Uttarakhand

Replica of Viking belt studs in Borre style, based on fids from Birka, Sweden. Made in solid bronze (yellowish shade). All our belt fittings are solid pieces of sterling silver or bronze, these aren’t thin plates, but a historical Viking adornment built to last. Wealthy Vikings loved to show their social status by wearing precious jewelry, but also by wearing belts with beautiful fittings, like elaborate buckles and strap ends, but often also with many studs. These belt studs are faithful replicas from belt set found in Viking grave in Birka, Sweden. The whole belt had a number of almost 40 belt studs in two kinds! Original belt find was made in bronze and you can find all elements of this set in bronze too in our shop. Dimentions:approx. 20mm x 18 mm. Weigth of one stud : approx. 5g.For a belt 2 cm wide.

Replica of Viking belt end with beautiful and elaborate decoration in Borre style. Both based on finds from Birka, Sweden, Viking period.Wealthy Vikings loved to show their social status by wearing precious jewelry, but also by wearing belts with beautiful fittings, like elaborate buckles and strap ends, but often also with many studs. These belt studs are faithful replicas from belt set found in Viking grave in Birka, Sweden. Dimentions:Belt End : 65mm x 18,5 mm.

  Medieval Dress Cloak Pin Pennanular Renaissance Brooch is practical, functional and beautiful. These forged steel pins brooches are strong and made to be used.     This pin can either be held fast between the two wavy swirls, or it can be twisted, so the pin sits on the loop: held in position by the pull of the fabric through which it passes.

Height : 6.25 ft Available in 18g (MS & SS)

This Steel Warrior Pauldron is sectioned into 6 parts. Each section is riveted to the next and has soft leather. The sections flex smoothly and naturally to allow full range of motion. Each section overlaps the last so the entire armor pauldron protects 100% coverage. A special guard is featured at the top to protect the neck and head from the sides. Thick leather straps allow secure fitment. Overall Length: 17 InchesWidth: 12 Inches

The boss was originally designed to deflect blows from the center of round shields, though they also provided a place to mount the shield’s grip. The Roman Scutum Square Shield Boss is constructed out of 16 gauge mild steel with a natural finish. The square umbo is larger on the sides than your average circular boss so it adds extra protection in the center. Included is mounting rivets and washers. Specifications: Overall Length: 9.13 Inches Overall Width: 9.13 Inches Dome Diameter: 5.25 Inches

The plate was worn a leather glove, to the fingers and thumb of which small overlapping scales were attached to complete the defense of the hand. Hourglass gauntlets are considered the zenith of medieval gauntlets. The leather glove helps to protect the hands in many ways and allows the sword wielder to have a solid and firm grip when fighting. Each finger piece has been riveted down and very flexible allowing each finger to fold freely.

Real Brass Knuckles, Heavy Duty, with the lettering USA engraved, weighs almost a pound! This thick item is made of solid brass. Has an overall length of 4.5 inches and a height of 2.5 inches. It has a solid and smooth finish. Large holes with a diameter of an inch. It’s easy to clean and shines like new. Perfect for self defense. Could also be used as an interesting paper weight. Weighs in at 15 ouncesLength: 4.5″Height: 2.5″

This is the Medieval 18 Gauge Steel Type B Elbow Armor with Leather Lining. All joints in the body are critical areas that need protection. It  comes with iron buckles and leather straps to hold it against your elbow area.   Specifications: Length: 4.75 Width: 5″ Material: 18 Gauge Mild Steel

Specifications: Size: 7 x 5 Inch Paper: ivory color, 220 pages (counted both sides)

A buckle with a universal use featuring spirals (volutes) suitable for an armour, bags, bracers, scabbards etc. Specifications: Material: 100% BrassSize: approx. 2.5 x 3.5 cmSuitable for 2 cm wide straps

  This 3 foot bull whip is made from genuine black leather and braided by hand. The whip has a studded handle and end cap with a loop to attach to your wrist and looks great hung from a belt

Arm Guard Traditional Leather Bracer for bow hunting/shooting. A good pair of leather arm bracers is so much more than just a simple piece of arm protection. All of our leather arm bracers are made from some of the highest quality materials possible. Length : 27cmTop Width : 26cmBottom Width : 19.5cmColour : Black

This is the Knee Armor Extended Deflectors 18 Gauge Steel. This is armor worn only over the knees and feature heavy duty adjustable black leather straps with one piece construction with leather padding riveted inside of the armor. Specifications: Width: 4.5″Length: 8.75″Material: 18 gauge steel

This opener is designed with the head of a duck including the beautiful beak with extraordinary details and a standard bottle opener at the back end of the head. Total Length : 5.75 Inches

A large, often flat topped and cylindrical helmet popularized during the era of the Crusades. The helmet completely enclosed the head and could be worn over a chain coif as well as iron or steel skull caps. The far superior protection that the great helmet provides over other forms of head wear comes at a cost. The very narrow openings for the eyes creates a very restricted field of vision for the wearer, mostly eliminating peripheral vision. Specifications: •It is made of hand-forged 16 gauge. Can be made in 18 gauge on request. •The Helmet comes with a Riveted High-Quality and adjustable Fake Leather Liner with Chinstrap and authentic Buckle. Forehead Circumference: Available in  70 cm.

This impressive neck protector is modeled after a similar piece found in the Wallace Collection, a gathering of historical artifacts including arms and armor. This particular gorget is a stunning recreation with a swiveling plate for variable protection. The layered plating around the collar, neck, and jaw ensure that a warrior will not soon lose their head to anything but the strongest of blows. Curved edges and rivets provide reinforcement, as well as a small influence of gothic design that was prevalent in much 14th, 15th, and 16th century armour. The gorget is worn independently, using a series of leather straps and buckles that secure it around the neck.

Overall Length: Spoon: 21 cmFork: 17 cmKnife: 21 cm

This Battle shield has a curved shape. It is the classic heater stylebattle shield. White Cross shields are hand-painted and then sprayed with a protective layer of polyurethane to preserve the artwork. Specifications : Size : 20″ x 28″ Available in 18g

This is the Large 18 Gauge Carbon Steel King Breast Plate Front Chest Plate Cosplay LARP. The front of the chest plate featuresminor fluting and a raised cross design. This piece includes only the front chest plate and is worn with included adjustable genuine leather straps in an X pattern along the back. Size : 54 cm (M), 60 cm (L), 66 cm

Material : Brass

Color : Golden

Our Cavalier Plate Armor Bracers go with a large range of medieval ensembles; they’re formed smoothly, hinged and lined with leather including leather straps. Straps on the inner arm adjust so it will fit just about anyone. They feature a smooth steel finish with small studs along the top and bottom edges. These bracers are great for Medieval Fairs, LARP events and most other Re-enactments.

Small Spearhead   This small spear or javelin head is hand-forged from high carbon steel and is left with a rough polish to keep a period appearance. This socketed spearhead has a 7/8’’ (2.2 cm) opening intended to fit a tapered haft. A pre-drilled hole allows for the addition of a screw or rivet to further secure the spearhead to a shaft – this hardware is not included. The edges are unsharpened, but the edges are beveled and could be sharpened by someone with proper equipment and sharpening experience with little difficulty.