Terrier Security & Allied Services Garhi Cantt, Dehradun, Uttarakhand

Best selling lightweight heavy duty clamp for universal lifting Application:  For vertical lifting, transporting and turning of all steel plates and structures from all positions Jaw openings available from: 0 to 150 mm TSEU / STSU types are supplied with enlarged jaw opening Working load limit (WLL) 750 - 30000kg (Higher WLL available upon request) Min . WLL is 10% of max . WLL note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb Features and benefits:  With articulated lifting shackle for universal lifting flexibility at various anglesThe articulated lifting shackle guarantees a pressure grip in every position, even when side loading up to 90 degrees . Note a lower load capacity when lifting in an angle higher than 45 degrees . Please check the WLL reduction belowLonger plates can be lifted without the use of a spreader beam when using two clamps on a two legged chain slingAlways equipped with a safety mechanism, ensuring the clamp does not slip when VertiCal lifting lifting force is applied and when load is being loweredClamp is locked in closed as well as open positionLightweight, maintenance-friendly, heavy duty body

three way articulated linkage arrangement for flexible lifting and extended reach Application:  For vertical lifting, transporting and turning of all steel plates and structures Jaw openings available from: 0 to 100 mm TSEMP / STSMP types are supplied with enlarged jaw opening Working load limit (WLL) 750 - 9000kg (Higher WLL available upon request) Min . WLL is 10% of max . WLL note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb Features and benefits:  With three way articulated linkage arrangement lifting shackle Enjoy all the benefits of the TS clamps with extra reach and lifting flexibility When attached to a fixed load bearing arm (e .g . spreader bar) the clamp will retain its flexibility and no chain is needed Due to length of the three way linkage arrangement the clamp can be lowered further between standing plates or structures Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered Clamp is locked in closed as well as open position Lightweight design for easy handling Tough quality heavy duty welded shell body Maintenance-friendly, easy to exchange parts which are available upon request

safe and easy square tube frame lifting Application:  For vertical lifting and transporting of structures where a square tube is used as a frame, e .g . mobile units etc . If the clamp is being loaded, the cams will pull out sideways and will grip into the sides of the square tube Jaw openings available from: 62 to 70 mm Working load limit (WLL) 3000kg Min . WLL is 10% of max . WLL note: the plate surface of the material must have a hardness level of max. HrC 37/345 Hb Features and benefits:  Because of the compact design of the clamp, the clamp will not use more space than the dimensions of the square tube Equipped with articulated lifting shackle for extra lifting flexibility (max 30o) Standard with 2 high grip pivots for extra powerful clamping force Special locking devise ensuring safe and easy handling Lightweight design for easy handling

Best selling lightweight heavy duty vertical lifting clamp Application: For Vertical lifting, transporting and turning of all steel plates and structures. Jaw openings available from: 0 to 150 mm. TSE STS types are supplied with enlarged jaw opening. Working load limit (WLL) 750 - 30000kg (Higher WLL available upon request). Min.WLL is 10% of max. WLL.

Extra hardened pivot and cam for Hardox lifting Application:  For vertical lifting, transporting and turning of all steel plates with a hardness of max . 50 HRC (for example Hardox 400 and 500) . Please ask for special specifications Jaw openings available from: 0 to 55 mm . Working load limit (WLL) 750 - 7500kg Min . WLL is 10% of max . WLL . note: the plate surface of the material must have a hardness level of max. HrC 50/485 Hb Features and benefits:  Equipped with an extra hardened pivot and cam Cam is coloured green for easy identification Always equipped with a safety mechanism, ensuring the clamp does not slip when lifting force is applied and when load is being lowered Clamp is locked in closed as well as open position Lightweight design for easy handling Tough quality heavy duty welded shell body Maintenance-friendly, easy to exchange parts which are available upon request

Multi-purpose screw clamp Application:  For vertical and horizontal lifting and transportation of a large variety of steel structures Can also be attached upside down and be used as a (temporary) lifting point Jaw openings available from: 0 to 100 mm TSCC-W types are supplied with enlarged jaw opening Working load limit (WLL) 500 - 6000kg . No min . WLL Features and benefits:  Special universal design ensures multi-purpose application of lifting steel structures Fitted with a moveable cam on the thread spindle which provides a powerful clamping force on the workpiece Equipped with a safety screw spindle mechanism, ensuring the clamp does not slip when lifting force is applied Lightweight design for easy handling Tough quality heavy duty drop forged body Forged alloy components, where required Maintenance-friendly, easy to exchange parts which are available upon request

Multi-purpose screw clamp Application: For vertical and horizontal lifting and transportation of a large variety of steel structures Can also be attached upside down and be used as a (temporary) lifting point Jaw openings available from: 0 to 100 mm TSCC-W types are supplied with enlarged jaw opening Working load limit (WLL) 500 - 6000kg . No min . WLL

Heavy duty clamp with high pressure resistant plastic for horizontal pipe lifting Application:  For horizontal lifting and transporting of steel and concrete pipes without damaging the product TPH-HD version is specially designed for extreme heavy duty lifting situations (eg . loading and unloading ships) Terrier TPH lifting clamps must always be used in pairs Jaw openings available up to 70 mm Working load limit (WLL) 1500 - 60000kg per pair (Higher WLL available upon request Features and benefits:  TPH Jaw is covered with a special high quality pressure resistant plastic TPH-HD Jaw is covered with special high quality extreme high pressure resistant plastic Maintenance-friendly clamps, plastic pressure resistant cover is pipe lifting easy to change TPH-HD has special handle for easy handling Compact design and high lifting capacity Lightweight design for easy handling Tough quality heavy duty body

Vertical lifting without marking, scratching or damaging the material surface without minimum Wll Application:  For vertical lifting and transporting of all plates and structures without marking, scratching and or damaging the material surface Perfect for lifting materials such as (stainless) steel, aluminum, nature stone, composite, painted materials, wood, glass, plastic, etc . Jaw openings available from: 0 to 60 mm STNMK types are supplied with enlarged jaw opening: 17 to 37 mm TNMK-A types are supplied with adjustable extra large jaw opening: 0 to 180 mm (A) (adjustable steps of 20 mm) Working load limit (WLL) 500 - 3000kg . No min . WLL Features and benefits:  With 2 special synthetic anti-friction pads to guarantee non-marking Supplied with chain lifting shackle for flexible lifting Always equipped with a safety mechanism, ensuring the clamp does not slip when non-marKing lifting lifting force is applied and when load is being lowered Clamp is locked in closed as well as open position Lightweight, maintenance-friendly, heavy duty body

Best selling lightweight heavy duty vertical lifting clamp Application: For Vertical lifting, transporting and turning of all steel plates and structures. Jaw openings available from: 0 to 150 mm. TSE STS types are supplied with enlarged jaw opening. Working load limit (WLL) 750 - 30000kg (Higher WLL available upon request). Min.WLL is 10% of max. WLL.

Best selling lightweight heavy duty clamp for universal lifting Application: For vertical lifting, transporting and turning of all steel plates and structures from all positions Jaw openings available from: 0 to 150 mm TSEU STSU types are supplied with enlarged jaw opening Working load limit (WLL) 750 - 30000kg (Higher WLL available upon request) Min . WLL is 10% of max . WLL note: the plate surface of the material must have a hardness level of max. HrC 37345 Hb

ightweight heavy duty clamp for safe and easy lifting of bending sheets Application:  For horizontal lifting and transporting of sheets that will bend or deflect when being lifted Terrier TDH lifting clamps must always be used in pairs (or multiple pairs) Jaw openings available from: 0 to 50 mm Working load limit (WLL) 1000 - 6000kg

lightweight heavy duty clamp for horizontal lifting Application:  For horizontal lifting and transporting of steel plates and other non-deflecting materials Terrier FHX / FHSX lifting clamps must always be used in pairs (or multiple pairs) Jaw openings available from: 0 to 150 mm FHSX types are supplied with enlarged jaw opening Working load limit (WLL) 1000 - 25000kg per pair (Higher WLL available upon request) Features and benefits:  Compact design and high lifting capacity Lightweight design for easy handling Tough quality heavy duty welded body

Special lightweight heavy duty clamp for drum lifting Application:  Designed for safe lifting, handling and transporting of steel (oil) drums Single clamp application on empty or filled sealed drums Filled open drums should be lifted by use of two clamps with a two leg chain sling Jaw opening available from: 0 to 17 mm Working load limit (WLL) 500kg Features and benefits:  With automatic locking mechanism Lightweight design for easy handling Tough quality heavy duty welded shell body Maintenance-friendly, easy to exchange parts which are available upon request

Multi purpose beam screw clamp Application:  For horizontal lifting and transportation of steel (H) beams, profiles and structures Can be used as upside down attached (temporary) lifting point FSV Jaw openings available from: 75 to 450 mm FSVS / FSVSU types are supplied with enlarged jaw opening: 75 to 560 mm FSV Working load limit (WLL) 1000 - 10000kg . (Higher WLL available upon request) FSVS / FSVSU Working load limit (WLL) up to 5000kg Features and benefits:  Special design makes it possible to lift steel (H) beams and structures Equal opening and closing of both jaws for simple and quick assembly Welded jaw plates for better positioning and less damaging of load FSVSU types are supplied with reinforced body and articulated lifting shackle Lightweight, maintenance-friendly, heavy duty body

Special lifting clamp for handling and vertical in-position lifting of beams Application: For vertical lifting, transportation and stacking of steel (H) beams, profiles and structures where the load must stay perfectly in position Especially recommended for transportation and stacking of steel (H) beams (e .g . when sawing of steel beams, stacking of steel beams and building of steel constructions) Jaw openings available from: 0 to 25 mm Working load limit (WLL) 1000 - 3000kg . Min . WLL is 10% of max . WLL note: the plate surface of the material must have a hardness level of max. HrC 37345 Hb