Abrasion Tester Dealers in Model Basti, Delhi

• Voltage: 220V
• Rated Power: 0.25 To 2 kw
• Brand Name: Steco
• Application: Industrial
• Frequency: 50/60 Hz
• Phase: Three Phase
• Use: Abrasion Tester
• Dial Gauge: 0.01 x 25 mm

The tile sample is pressed under a specified load against a grinding path strewn evenly with an abrasive powder revolving at the rate of 30 + 1 r.p.m. At the end of 100 revolutions of the disc the second parallel side of the tile is subjected to wear for an equal number of revolutions of the disc. The wear of tile is measured using a thickness gauge. The Abrasion testing machine consists of a replaceable grinding path fitting on to a disc rotating its vertical axis. The rotating disc and grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counter balanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder. Supplied complete with automatic preset revolution counter and one 7.5 kg weight but without abrasive powder and thickness gauge. Suitable for operation 230 V, single phase, Ac supply.

  Dorry Abrasion Testing Machine is a very important Aggregate Testing Equipments. Dorry Abrasion Testing Machine is used for testing aggregates for resistance to abrasion. Two specimen can be mounted simultaneously and then kept loaded by weights against a machined flat circular grinding surface. The grinding disc rotates at 28-30 r.p.m and two funnels release a continuous flow of Suitable sand for operation on 230 Volts, Single phase 50 Cycles A.C. Supply.

It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 RPM.Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two Conical Hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two containers with weights are supplied to keep the specimens pressed against the rotating disc. Suitable for operation on 220 V, 50 cycles, A.C. Supply.

• Brand Name: Ramp
• Application: To determine the abrasion resistance of all type of fabrics
• Quality: 1
• Model Number: 1

To determine the abrasion resistance of all type of fabrics. Microprocessor based Controller. Having 4 stations for abrasion, complete with all accessories including 2 sample cutters of 38 mm and 140 mm diameter including lissajous figure marking pen. Weight : 75 kg (165 lb) Dimensions: Length Depth Height 720 mm 700 mm 310 mm 28 ���¼ Inch 27 ���½ Inch 12 ���¼ inch International Standards: BS 3424 5690�¢ï¿½ï¿½ISO 5470�¢ï¿½ï¿½ ASTM D 4966�¢ï¿½ï¿½ISO 12947

For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 r.p.m. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to keep the specimens pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C. supply.

• Type: Tile Abrasion Testing Machine
• Certification: ISO 9001:2008
• Weight: 100-1000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Rated Power: 5-7kw

For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 r.p.m. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to keep the specimens pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C. supply.  

• ACCESSORIES: Thickness Measurement Jig with 0.01 mm x 25 mm dial gauge.

It is used for determining the resistance of flooring tiles to wear or abrasion. It consists of the following :- i) A grinding disc furnished with a replaceable grinding path and rotating horizontally about its vertical axis. ii) A circular tray enclosingthe grindingdisc. iii) Holding device for test specimen. iv) Reduction gear coupled to a motor for operation on 220 v, 50 Hz, single phase supply. v) Revolution counter. (Preset cumulative).

We are one of the well-known Manufacturers, Exporters and Suppliers of the Dorry Abrasion Testing Machine. The Dorry Abrasion Testing Machine manufactured by our company is widely known for its superior quality and work performance. We keep the various quality parameters in mind while manufacturing the Dorry Abrasion Testing Machine. Parts of the Dorry Abrasion Testing Machine Rotating metal discVertical shaftFunnel for feeding sandReduction gear for revolution Features Operates in the standard procedure of BS : 812¼ HP Electric Motor28-30 revolutions of the metal disc per minuteSuitable for operating from 220230 V, single phase AC motor

• Power: 2 KW
• Voltage: 220 V
• Color: Blue
• Type:  Digital
• Material: Mild Steel
• Frequency: 50 Hz
• Phase: Single Phase
• Surface Finishing: Paint Coated

This machine is used for determining the resistance of aggregates to wear by abrasion. Two specimens can be mounded simultaneously and then kept loaded by weight against a machined flat circular grinding surface.

Martindale Abrasion Tester, subsonic wind tunnel, Colour Matching Cabinet

Martindale Abrasion Tester, Pick Glasses, Wrap Reel