Abrasion Tester Dealers in Rajendra Place, Delhi

This machine is for determining the resistance to wear of small size coarse aggregates and crushed rock. The machine consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. A detachable shelf which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30- 33 rpm by an electric motor through a heavy duty reduction gear. Motor is suitable for operation on 415 V, 3 phase, 50 Hz, AC Supply. Supplied complete with a tray for collection of the material, but without abrasive charge.Details : Product Code: EKE 458 Standrad : IS:10070 EKE 45801 Abrasive charge, consisting of a set of 12 hardened steel balls of 48 mm dia Optional Extra EKE 45802 Revolution Counter EKE 45803 Sound-proof Cabinet

• Voltage: 415 V

The tile sample is pressed under a specified load against a grinding path, strewn evenly with abrasive powder, revolving at the rate of 30 ± 1 rpm. At the end of 100 revolutions of the disc, the second parallel side of the tile is subjected to wear for an equal number of revolutions of the disc. The wear of the tile is measured using EKE48101 thickness measuring device (which is supplied at extra cost). The abrasion testing machine consists of a replaceable grinding path, fitted on to a disc rotating about its vertical axis. The rotating disc and the grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counter- balanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder.

Determination of resistance of any fabric to abrasion is usually carried out by abrading the fabric under specified conditions against a standard abradant.

• Voltage: 220V
• Brand Name: Steco
• Usage/Application: Abrasion Testing
• Material: Mild Steel
• Frequency: 50/60 Hz
• Phase: Three Phase
• Gear Speed: 30-33 rpm

• Type: Tile Abrasion Testing Machine
• Certification: ISO 9001:2008
• Weight: 100-1000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Rated Power: 5-7kw

• Power: 2 KW
• Voltage: 220 V
• Color: Blue
• Type:  Digital
• Material: Mild Steel
• Frequency: 50 Hz
• Phase: Single Phase
• Surface Finishing: Paint Coated

• Optional: Digital Timer

The machine comprises of a hollow cylinder, which is horizontally mounted on a strong frame on ball bearings. The cylinder has an opening, which can be closed with a dust tight cover to promote charging and discharging the cylinder with the material under test. It consists of a detachable extension that extends throughout the interior of the cylinder and prevents it from falling on the cover. The cylinder is rotated by an electric motor through a heavy reduction gear. A revolution counter is attached to the frame and provided with tray for collection of materials at the end of the test. The machine is supplied with abrasive charges consisting of a set of 12 hardened steel balls having approximately 48 mm diameter.

We deals in supplying of wide range of Abrasion Tester.

This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.

  Dorry Abrasion Testing Machine is a very important Aggregate Testing Equipments. Dorry Abrasion Testing Machine is used for testing aggregates for resistance to abrasion. Two specimen can be mounted simultaneously and then kept loaded by weights against a machined flat circular grinding surface. The grinding disc rotates at 28-30 r.p.m and two funnels release a continuous flow of Suitable sand for operation on 230 Volts, Single phase 50 Cycles A.C. Supply.

The tile sample is pressed under a specified load against a grinding path strewn evenly with an abrasive powder revolving at the rate of 30 + 1 r.p.m. At the end of 100 revolutions of the disc the second parallel side of the tile is subjected to wear for an equal number of revolutions of the disc. The wear of tile is measured using a thickness gauge. The Abrasion testing machine consists of a replaceable grinding path fitting on to a disc rotating its vertical axis. The rotating disc and grinding path are enclosed by a circular tray. A bracket holds the specimen. The loading is by a counter balanced lever. A funnel is provided to facilitate charging the grinding path with abrasive powder. Supplied complete with automatic preset revolution counter and one 7.5 kg weight but without abrasive powder and thickness gauge. Suitable for operation 230 V, single phase, Ac supply.

Our company is one of the renowned Manufacturers, Exporters and Suppliers of the Tile Abrasion Testing Machine. We manufacture Tile Abrasion Testing Machines from high-quality raw materials and the subsequent quality of the product is also superior. We provide deliveries on time so that the client needs are satisfied with great efficiency. Tile Abrasion Testing Machine is used to determine resistance to wear and tear of the cement and concrete flooring tiles. Parts of the Tile Abrasion Testing Machine Grinding PathRotating Grinding DiscThickness GaugeCircular Tray and BracketCounter Balance LeverFunnelRe-adjustable Pre-set Counter Features Manufactured as per Is 1237 and IS 1706Disc rotations of 30 rpm with a load of 30kgfDeals with tiles specimen of 7.06cm x 7.06cmPre-set counter stops the disc after 22 revolutions. The count can be re-adjusted.Works on 440 V AC three phase electric supply (Can be 230V machine on request)

Dorry Abrasion Testing Machine, subsonic wind tunnel, Colour Matching Cabinet