Abrasion Tester Dealers in Sadar Bazar, Delhi

For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 r.p.m. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to keep the specimens pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C. supply.

• Brand Name: Ramp
• Application: To determine the abrasion resistance of all type of fabrics
• Quality: 1
• Model Number: 1

To determine the abrasion resistance of all type of fabrics. Microprocessor based Controller. Having 4 stations for abrasion, complete with all accessories including 2 sample cutters of 38 mm and 140 mm diameter including lissajous figure marking pen. Weight : 75 kg (165 lb) Dimensions: Length Depth Height 720 mm 700 mm 310 mm 28 ���¼ Inch 27 ���½ Inch 12 ���¼ inch International Standards: BS 3424 5690�¢ï¿½ï¿½ISO 5470�¢ï¿½ï¿½ ASTM D 4966�¢ï¿½ï¿½ISO 12947

For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28-30 r.p.m. Under the rotating disc is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket fixed to the circular tray. An arrangement is made for start and stop the flow of sand. Two holes are provided for mounting two specimens simultaneously. Two containers with weights are supplied to keep the specimens pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C. supply.  

• Voltage: 220V
• Brand Name: Steco
• Usage/Application: Abrasion Testing
• Material: Mild Steel
• Frequency: 50/60 Hz
• Phase: Three Phase
• Gear Speed: 30-33 rpm

Made By : Imported       PRODUCT FETURES Wet Abrasion Scrub Tester □  Indtroduction : This machine is used to test the abrasion, scrub and wash ability performance for Many kinds of materials ; do the abrasion scrub test in wet and dry condition ; touch Screen control. It is widely used in water – based coating field.   □  Application : Paint, coating, leather, wood, plastic, printing materials and fiber etc. □  Features : • Big LCD design, touch – screen operation  • Operating Menu : English • Testing fluid flow is controlled by peristaltic pump   □ Technical Specification : •  Scrub Rate : 37 ± cycles / min • Maximum Setting of Abrasion Times : 9999 • Sample Thickness : 0 – 25 mm • Test Panel Thickness Range : 0 – 25 mm     ( Adjustable )   □ Standards : • ASTM D2486, D3450, D5213 • DIN 53778   □ Order Information : • 1. 2805 Wet Scrub Tester ( Standard Model ) Carriage assembly with pump, Applied weight 500g , 2 brushes with natural bristle   • 2. 2805 / 1 Wet Abrasion Scrub Tester DIN 53778 Carriage assembly with pump, Applied weight 250g, 2 brushes with natural bristle   • 3. 2805 / 2 Wet Abrasion Scrub Tester ASTM D2486 Carriage assembly with pum, Applied load 454 g, 2 Nylon brushers, 2 rubber pads with 12.7X0.25mm Brass shim   • 4. 2805 / 3 Wet Scrub Tester ASTM D3450 Carriage assembly with pump, applied weight 1500g, 2 sponges 

• ACCESSORIES: Thickness Measurement Jig with 0.01 mm x 25 mm dial gauge.

It is used for determining the resistance of flooring tiles to wear or abrasion. It consists of the following :- i) A grinding disc furnished with a replaceable grinding path and rotating horizontally about its vertical axis. ii) A circular tray enclosingthe grindingdisc. iii) Holding device for test specimen. iv) Reduction gear coupled to a motor for operation on 220 v, 50 Hz, single phase supply. v) Revolution counter. (Preset cumulative).

• Type: Tile Abrasion Testing Machine
• Certification: ISO 9001:2008
• Weight: 100-1000kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Rated Power: 5-7kw

This machine is used for determining the resistance of aggregates to wear by abrasion. Two specimens can be mounded simultaneously and then kept loaded by weight against a machined flat circular grinding surface.

Martindale Abrasion Tester, Front Loading Dryer, Pick Glasses, Wrap Reel