Back Back
Los Angeles Abrasion Testing Machine
Get Price Quote
1 Set(s) (MOQ)
We are offering Los Angeles Abrasion Testing Machine used for testing crushed rock, crushed slag, crushed and uncrushed gravel for resistance to abrasion. as per is : 2386 (part iv ) astm : c 131, aasho t 96.
Martindale Abrasion Cum Pilling Tester
Get Price Quote
Holding years of expertise in the industry, we, as a Manufacturer, Exporter & Supplier, offer Martindale Abrasion Cum Pilling Tester. We manufacture the best quality thanks to our skilled professionals, sophisticated technology and latest machines. 4 Heads is used to check the abrasion as well as pilling resistance of the fabric/garment. The raw material used in manufacturing Martindale Abrasion Tester is procured from reliable vendors who refuse to compromise with quality. Vgotech Martindale Abrasion Tester Cum Pilling Tester With preset digital counter & standard accessories. Accessories : 140mm cutter - 1pc., 38mm cutter -1no. Weights for 12 kpa & 9 Kpa, Rubber Pad -2pc PU Foam, Abradant Fabric & Non Woven Felt.
Best Deals from Abrasion Tester
Los Angeles Abrasion Apparatus
48,000 Per Piece
Features The machine comprises a hollow cylinder that is mounted on a robust frame on ball bearings. A detachable shelf that spreads throughout the inner length of the drum catches the abrasive charge without allowing it to fall on the cover. The drum is revolved at a speed of 30-33 RPM through an electric motor by a heavy duty reduction gear. Motor is apt for operation on 3 phase, 440 volts, and A.C. supply. The unit should be offered with a tray for accumulation of the material with abrasive charge. It is also be supplied with 12 nos. hardened steel balls (Abrasive Charge) of 48mm dia.
Tile Abrasion Testing Machine
1 - 10 Per Piece
1 Piece (MOQ)
IS 1237, IS 1706 Specification: This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thickness gauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counter is Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.
Tile Abrasion Testing Machine
40,000 - 45,000 Per Piece
1 Piece (MOQ)
For clay roofing tiles (Mangalore Pattern) and Cement Concrete Flooring Tiles. This is a double lever (leverage 1:12) loading machine and the load is applied by flow of lead shots, which automatically stops when the sample breaks. The load is applied at rate of 450 to 550 Nminute (45 to 55 kg minute) or 2000 Nminute (200 Kgminute) and the accuracy of load indication is ± 2%. The sample is mounted between rollers 40 mm dia or12 mm dia. Bearing Rollers can be placed at center distance of 150 mm, 200 mm, 250mm or 270mm as the case may be. Complete with 20 Kg lead shots
Tile Abrasion Testing Machine
Get Price Quote
Our Tile Abrasion Testing Machine is fabricated as per IS: 1237 and 1706. Tile Abrasion Testing Machine offered by us consists of a grinding path fixed to a rotating disc, which is enclosed by a circular tray. Herein, the tile sample is compressed against the grinding path, which is revolving at the rate of 30 ± 1 revolutions per minute. Tile Abrasion Testing Machine, that we offer, is attached with automatic preset counter to rest the machine after 22 revolutions. Tests the Resistance Against Abrasion of Crushed Rock Crushed Slag Crushed Gravel Uncrushed Gravel As specialists in manufacturing and supplying Tile Abrasion Testing Machine, we are bent on providing our customers 100 percent satisfaction.
Dorry Abrasion Testing Machine
38,000 Per Piece
Los Angeles Abrasion Testing Machine
50,000 - 53,000 Per SET
1 Piece(s) (MOQ)
Model No.: VKSI-066 Standards: IS-2386(PART 4) We are providing Los Angeles Abrasion Testing Machines to our clients. These are vastly used for estimation of abrasion value of coarse aggregate. It is fitted with an abrasive charge consisting of 12 steel balls. The use of high-grade raw materials makes certain that the quality is not compromised. Los Angeles Abrasion Testing Machine consists of: · A hollow steel cylinder that is mounted on a sturdy frame · Motor with reduction gear · Tray · Detachable shelf
Los Angeles Abrasion Testing Machine
Get Price Quote
We are New Delhi(India) based entity and have become a primary choice of the buyers owing to our timeliness. With complete security system and with the help of the leading technologies, we make it possible to make payments online. Fret not! We ensure that all the details are kept confidential and are not shared with the third party.Specification : Speed - 30-33 rpm Power - 415 V, 3 Phase, 50 Hz, AC supply Outside Dimension - 1100x780x1000 mm
Dorry Abrasion Testing
Get Price Quote
This is for aggregates resistance to abrasion. The apparatus consists of a metal disc which revolves in a horizontal plane on a vertical shaft. A suitable attachment for holding the specimen with is axis vertical and its lower end pressed with a prescribed pressure against the surface of the disc (the distance from the centre of specimen to the centre of shaft being 25 cm) is provided. A convenient funnel for feeding sand continuously upon the rotating disc is also provided. The machine is fitted with a ¼ h.p. electric motor, driven through a reduction gear to give 28-30 revolution of the disc per minute. Suitable for operation from 220/230 volts single phase, A.C. supply
Tile Abrasion Testing Machine
36,000 Per Piece
Din Abrasion Tester
Get Price Quote
MYQ Din Abrasion Tester is designed to determine abrasion resistance index of natural and synthetic rubber in accordance with the above principle. It consists of test specimen holder with a cylindrical opening adjustable between 15.5 to 16.3 mm to clamp the test specimen with an arrangement to adjust the length of test specimen protruding out. The holder is mounted by a screw mechanism along a length of a rotating drum on which the abrasive cloth is fixed. The movement of the screw mechanism and drum is given by an electric motor, gearbox and chain mechanism to give the specified speed of rotation to the drum and the specified lateral movement to the test specimen holder. The swivel arm and test specimen holder are so disposed that the test specimen is pressed against the drum under the specified load with its center axis at an inclination of 3 degrees to the perpendicular in the direction of rotation and placed above the longitudinal axis of the drum. A rack and pinion arrangement to rotate the test specimen about its axis during the test (whenever desired) is also provided. The abrasive cloth is firmly fixed to the drum using a suitable peel able adhesive with the ends of the abrasive cloth butt jointed together. The equipment is provided with limit switches which, in addition to giving over travel safety to the movement of test holder by preventing the lower edge of the test specimen holder to touch the abrasive cloth. The equipment is built on the rigid steel base and finished in gray metallic and bright chrome/zinc plating to give it a corrosion resistant finish. The molding dies, rotary type cutting dies (hollow drill) for preparing test specimens and extra abrasive cloth are available as optional accessories.
Dorry Abrasion Testing Machine
Get Price Quote
Dorry Abrasion Testing Machine that we provide is used for determining the resistance of aggregate to wear by abrasion. If there is an inadequate abrasion resistance of road-surfacing aggregates that it means an early loss of the texture depth, which is basically required for maintaining the high-speed skidding resistance. Dorry Abrasion Testing Machine features a disc rotating about a shaft that is connected to a reduction gearbox fixed to a motor. That disc rotates at 28-30 R.P.M. It features two conical hoppers, two holes for specimens and two containers with weights. It is ideal to be operated on 220 volts, 50 cycles, and A.C. supply.
abrasion piling tester
78,000 Per Piece
Tile Abrasion Testing Machine
35,000 Per Piece
1 Piece (MOQ)
Abrasion Testor Machine
Get Price Quote
Wet abrasion Scrub Tester
Get Price Quote
Made By : Imported PRODUCT FETURES Wet Abrasion Scrub Tester □ Indtroduction : This machine is used to test the abrasion, scrub and wash ability performance for Many kinds of materials ; do the abrasion scrub test in wet and dry condition ; touch Screen control. It is widely used in water – based coating field. □ Application : Paint, coating, leather, wood, plastic, printing materials and fiber etc. □ Features : • Big LCD design, touch – screen operation • Operating Menu : English • Testing fluid flow is controlled by peristaltic pump □ Technical Specification : • Scrub Rate : 37 ± cycles / min • Maximum Setting of Abrasion Times : 9999 • Sample Thickness : 0 – 25 mm • Test Panel Thickness Range : 0 – 25 mm ( Adjustable ) □ Standards : • ASTM D2486, D3450, D5213 • DIN 53778 □ Order Information : • 1. 2805 Wet Scrub Tester ( Standard Model ) Carriage assembly with pump, Applied weight 500g , 2 brushes with natural bristle • 2. 2805 / 1 Wet Abrasion Scrub Tester DIN 53778 Carriage assembly with pump, Applied weight 250g, 2 brushes with natural bristle • 3. 2805 / 2 Wet Abrasion Scrub Tester ASTM D2486 Carriage assembly with pum, Applied load 454 g, 2 Nylon brushers, 2 rubber pads with 12.7X0.25mm Brass shim • 4. 2805 / 3 Wet Scrub Tester ASTM D3450 Carriage assembly with pump, applied weight 1500g, 2 sponges
Angles Abrasion Testing Machine
Get Price Quote
We are offering angles abrasion testing machine. We design the los angles abrasion testing machine as per the is: 2386 (part iv ) astm : c 131, aasho t 96 standards. Clients are eased with the availability of the los angles abrasion testing machine at rock bottom prices and in tamper proof packing. We are a trustworthy los angles abrasion testing machine manufacturer, exporter and supplier based in india. used for testing crushed rock, crushed slag, crushed and uncrushed gravel for resistance to abrasion. about los angles abrasion testing machine the machine consists of a hollow cylinder mounted horizontally on a study frame on ball bearingscompete with abrasive charge consisting of a set of twelve hardened steel balls, approximately 48mm diait has an opening which can be closed with a dust tight cover to facilitate charging and discharging the drum with the material under testa revolution counter is fitted to the framea tray is supplied for collecting of the material at the end of the testa detachable shelf which extends throughout the inside length of the drum which catches the abrasive charge and does not allow it to fall on the coverthe drum is rotated by an electric motor through a heavy reduction gear at a speed of 30-33 r.p.msuitable for operation on 440 volts, 3 phase, 50 cycles, a.c. Supply.
Los Angeles Abrasion Testing Machine
Get Price Quote
1 Piece (MOQ)
For determination of resistance to wear of coarse aggregate by abrasion. A rolled steel drum totally closed except for removable dust-tight cover is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. The drum is rotated by one h.p. electric motor. A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 r.p.m. Inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests. Supplied with 12 abrasive charges 1 7/8" dia and Revolution Counter fitted to the rotating shaft.
Los Angeles Abrasion Testing Machine
Get Price Quote
Los Angeles Abrasion Testing Machine is used for testing crushed rock, crushed slag, crushed and uncrushed gravel to provide resistance from abrasion. We provide Los Angeles Abrasion Testing Machine at the best prices in the market. Our range of Los Angeles Abrasion Testing Machine is1 very competent in its function. Highlights : Easy to installLow maintenanceHigh quality materials usedDurable machine
Abrasion Testing Machine
Get Price Quote
This machine is for determining the resistance to wear of small size coarse aggregates and crushed rock. The machine consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. A detachable shelf which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30- 33 rpm by an electric motor through a heavy duty reduction gear. Motor is suitable for operation on 415 V, 3 phase, 50 Hz, AC Supply. Supplied complete with a tray for collection of the material, but without abrasive charge.Details : Product Code: EKE 458 Standrad : IS:10070 EKE 45801 Abrasive charge, consisting of a set of 12 hardened steel balls of 48 mm dia Optional Extra EKE 45802 Revolution Counter EKE 45803 Sound-proof Cabinet
Los Angeles Abrasion Testing Machine
45,000 Per Piece
Los Angeles Abrasion Testing Machine
80,000 Per 1
Our Los Angeles Abrasion Testing Machine is for determination of resistance to wear of coarse aggregate. We design Los Angeles Abrasion Testing Machine with precision, and has unique construction of rolled steel drum totally closed except for removable dust-tight cover. Los Angeles Abrasion Testing Machine is connected to stub shaft and mounted on steel frame to allow rotation about its axis in a horizontal plane. We manufacture them keeping in mind the varied uses of our clients. Specialty The drum is rotated by one h.p. electric motor Supplied with 12 abrasive charges of 48 mm diameter Revolution Counter fitted to rotating shaft A heavy duty speed reducer coverts the motor speed to required drum speed of 30 to 33 R.P.M. Inside the drum is provided a steel shelf which can be easily replaced when worm out due to repeated abrasion tests Why Our Los Angeles Abrasion Testing Machine? High performance speed Easy operational features High efficiency High speed
Tile Abrasion Testing Machine
Get Price Quote
Tile Abrasion Testing Machine-VSLIC5024 Product Description This is used for determination of resistance to wear for Cement & Concrete flooring tiles. Tiles specimen of size 7.06 cm x 7.06 cm is pressed face-wise under specific load on a grinding path and abrasive powder is evenly spread on the rotating grinding disc the second parallel side of the tile is subjected to wear for similar number of rotations. The wear of the tile is measured on a thicknessgauge specifically made for the purpose. The machine consists of a disc rotating at a speed of 30 R.P.M. in a circular tray. A bracket is provided to hold the specimen. A counter balance lever loads the specimen. Load applied is 30 Kgf. A funnel is fitted to evenly spread abrasive powder on the grinding path. A Pre-set Counter automatically stops the machine after 22 revolutions. This counteris Re-adjustable. The machine works on 440 V A.C. Three Phase electrical supply. On request machine to operate on 230 V A.C. Supply can also be supplied.
Dorry Abrasion Testing Machine
25,000 - 35,000 Per Piece
1 Piece(s) (MOQ)
For testing aggregates for resistance to abrasion. It consists of a disc rotating about a shaft connected to a reduction gear box coupled to a motor. The disc rotates at 28030 revolutions per minute. Under the rotating disc there is a tray with an outlet to facilitate the removal of sand. Two conical hoppers are mounted on a bracket. An arrangement is made to start and stop the flow of sand. Two containers with weights are supplied to keep the specimen pressed against the rotating disc. Suitable for operation on 220 volts, 50 cycles, A.C.supply.
Martindale Abrasion Tester
Get Price Quote
1 Pair (MOQ)
Los Angeles Abrasion Machine
Get Price Quote
We are offering los angeles abrasion machine. it is used for determining the resistance to wear of small size coarse aggregates and crushed rock. The machine consists of a hollow cylinder, mounted on a sturdy frame on ball bearings. A detachable shaft which extends throughout the inside length of the drum catches the abrasive charge and does not allow it to fall on the cover. The drum is rotated at a speed of 30-33 rpm by an electric motor through a heavy duty reduction gear. Suitable operation on 415v, 3 phase, 50hz, ac supply. Supplied complete with abrasive charge.
MARTINDALE Abrasion TESTER i9 (6 Stations)
100 - 200 Per 1 Piece
1 Piece (MOQ)
A Martindale Abrasion Tester is a unique Instrument suitable for determination of the abrasion resistance of all knitted, woven, non-woven, Leather and Coated Fabrics. Paramount MARTINDALE Abrasion TESTER i9™ (6 Stations) is a N ext G eneration Abrasion & Pilling Tester to determine the abrasion and pilling of all knitted, woven, non-woven, Leather and coated Fabrics. It is a versatile Equipment capable of multiple Abrasions and Pilling Tests. It has a touch screen controller with most common functions accessible in one to two Touchscreen. The equipment is designed to subject specimens under test to a controlled amount of rubbing at comparatively low pressures and in continuously changing directions to ensure that all surface fibres on the specimens are flexed in order to compare the resistance of fabrics to abrasion. The 6 stations instrument is ergonomically designed to conserve space while providing maximum testing capacity. Each specimen is prepared and mounted separately in a Specimen Holder. To promote even wear, specimen lighter than 500 g/ m² are backed with a standard Polyurethane foam. The Abradant material (Stand ard Felt & Stand ard Abradant Fabric ), against which the specimen is rubbed , is clamped tightly over the abrading Platform to prevent possible metal-to-metal contact. The instrument is finished in Blue and Gray Powder coated paint to giv e it truly gorgeous looks .
Los Angels Abrasion Testing Machine
85,000 Per Piece
Deval Abrasion Testing Machine
Get Price Quote
For the determination of resistance of aggregate to wear by abrasion. Two hollow cylinders, closed at one end and provided with tightly fitting covers at the other end. The inside diameter of the cylinder 20 cms and 34 cms depth. The cylinders are mounted on a shaft at an angle of 30° with the axis of rotation. The shaft rotates at 30-33 rpm through a reduction gear, coupled to a motor. Suitable for operation on 440 volts, three phase, 50 cycles, AC supply. Supplied complete with a counter and push button starter. With 12 nos cast iron spheres or steel spheres (steel balls) hardened, approx. 48 mm in diameter, each weighing 380-445 gm.
Filter by Localities
