AC Drive Control System Dealers in North Campus, Delhi (16 products available)

Industrial and commercial installations in our country have large electrical loads which are severely inductive in nature, such as motors, large machines, air conditioners, drivers etc. which causes a severely lagging power factor. This lagging power factor results in loss and wastage of energy and thus heavy penalties by electricity boards. In case of fixed loads this can be taken care by manual switching of capacitors. However in case of rapidly varying and scattered loads it becomes difficult to maintain a high power factor and hence manually switching on/off the capacitors in proportion to variation of load within an installation is next to impossible. This drawback can be overcome by using an APFC panel (Automatic Power Factor Correction Panel) which not only maintains a high power factor but also eliminates the need for constant manual intervention. The ratio of Active Power to Apparent Power is called Power Factor which is equal to Active Power/ Apparent Power Prevents leading power factor in the installation during low load conditions Improves efficiency of the system by reducing losses Reduces the KVA demand charges Ability to maintain a constant high power factor Economical with faster payback periods Eliminates low power factor penalties levied by EB  

Vehicle : Scorpio

For Enclosures, specially unmanned, the following parameters need to be monitored to ensure safety of the equipment in the enclosure. Our system monitors and intimates on the NMS: if there is smoke inside the shelter if the temperature inside the shelter goes beyond a limit (indicating Power/AC failure or even a Fire) if someone has opened the door of the shelter and is not authorized to do so These conditions, if unchecked can compromise the security of lacs worth of equipment in the shelter and more importantly will lead to break in service and hence dissatisfied customers. Keeping the above in mind, we have developed a comprehensive solution that incorporates all the features in a single box that operates on 48V DC.   Our Fire Panel (Advanced Model) has following features: Central Control Panel Intrusion detection Smoke detection Temperature rise detection Whenever a zone is activated through its sensor, the following outputs are there Corresponding zone LED lights up on Central Panel Relevant message appears on LCD Display In-built Buzzer sounds NMS compatible NO/NC output is also activated In case of Fire additionally a hooter also sounds. This hooter can be mounted outside the shelter Rugged industrial design, suitable for rough usage Temperature Alarm/Sensor features: Continuous monitoring of temperature using an external temperature sensor If the temperature in BTS shelter goes beyond the User defined temperature cut-off then the Temperature LED lights up on the central panel and Buzzer starts sounding. Also, the NMS is activated. Once the temperature goes back to normal, the LED, Buzzer and NMS are reset automatically. The display will indicate 'System Normal' The cut-off temperature can be modified by jumper setting Fire Detection: Fire detection is done using a standard Smoke Sensor that is interfaced with the Central Panel. The Smoke Sensor comes with blinking LED to indicate the status of the sensor The Smoke sensor draws it's power from central panel In case of fire, the Fire LED lights up on the central panel and buzzer sounds. Also, the NMS is activated. In case of Fire, additionally, a hooter also sounds. This hooter can be mounted outside the shelter In case the wiring of Smoke sensor is Open or Short then corresponding LED lights up and buzzer sounds. The LCD display also displays the OPEN/SHORT message. RESET button is provided for resetting Fire indication. Intrusion Detection with Entry/Exit Delay: Intrusion is detected using a magnetic switch that has to be mounted on the door of the enclosure. There is provision for Entry and Exit delay so that user can deactivate the alarm before the NMS starts When the door is opened, the Door LED lights up on the central panel and Buzzer starts sounding. Also, the NMS is activated. The user has to enter the 4 digit Password to deactivate the buzzer and NMS. While leaving the enclosure, the user has to again enter the 4 digit Password to activate the Intrusion detection function The exit time is as determined by the jumper setting Entry Code: Four digit Code has to be entered on the keypad provided to detect authorized entry. This is factory preset to 1234. User can change the password of each panel by going into programming mode without the need to open the panel. Specifications: Following are the specifications of this Fire Alarm Panel:- Fire Zone : One Fire Sensor : Optical Type Sensor, 1 No. (Provision for second Sensor too) Door Sensor : Magnetic Door Sensor, 1 No. Temperature Sensor : RTD or Thermistor Sensor, 1 No. Entry delay, suitable using jumpers but displayed on LCD Exit delay, set table using jumpers but displayed on LCD Hooter max time limit Controls: LCD display to display various error message Separate switch to indicate selected settings Jumper based settings Front panel control: Reset switch for fire alarm

We are offering advanced fire alarm panel. Advanced fire panel - our advance fire alarm sensors helps to detect the smoke in an easier way with lcd display. Get the latest fire alarm sensors and get fire protection with our with our advance fire alarm monitoring systems. Spaceage security offers best commercial fire alarm system with various other fire sensor services.

Features : High output to weight ratio, Junction box, Synchronizing trolley.

Height : 2230 or 2300 Mm

Width : 600, 750, 900 or 1000 Mm

Depth : 600 or 800 Mm