Acrylic Sealants Dealers in New Friends Colony, Delhi

• Brand Name: Globalprene
• Product Code: LCY1487
• Weight: 20Kg, 600kg
• Pack Type: Paper Bag & Super Bag
• Shelf Life: 1year

Globalprene® 1487 is a Styrene Butadiene Styrene Block Copolymer (SBS) material.Important attributes of Globalprene® 1487 are: REACH Compliant RoHS Compliant High Strength Branched Polymer Structure Copolymer Typical applications include: Additive/Masterbatch Consumer Goods

• Brand Name: CICO SEALANT T680
• Model Number: CICO SEALANT T680
• Place of Origin: INDIA

We offer sealants. Cico sealant t680 polysulphide based elastomeric sealant for joints subject to movement. Available in two pack units. features used to for long lasting weather -resistant and waterproof seals in expansion joints long lasting elasticity high movement capacity excellent adhesion to many substances chemical resistance gun grade for vertical joints easy to pour on horizontal joints with pour grade usage gun grade is used in vertical as well as horizontal joints pour grade is used specifically in horizontal movement joints areas like runways, subways, rigid pavements or in industrial floors. method of application use paddle type mixer for mixing both components to a smooth uniform consistency. Mixing time normally around 8-10 minutes. Place the uniformly mixed sealant into the joints. Remove masking tape from the edge. dosage dosage depends upon the joint size. Refer to technical data sheet for details. pack size : 1kg,4kg kit shelf life : 12 months.

• Skin formation: 25 - 30 min
• Curing speed * (20°C / 65% R.H.): Ca. 2 mm/24h
• Hardness: 35 ± 5 Shore A
• Density: Ca. 1,45 g/ml
• Elastic recovery (ISO 7389): > 80 %
• Maximum allowed distortion: 25%
• Temperature resistance: -60°C → 180°C
• Max. tension (DIN 53504): 1,60 N/mm²
• Elasticity modulus 100% (DIN 53504): 0,60 N/mm²
• Elongation at break (DIN 53504): Ca. 500 %
• Application temperature: 5°C → 35°C

• Color:: Black
• Packaging:: 310ml

High Temperature Neutral Silicone Sealant   Silirub HT°-N is an elastic, single component engineering sealant based on silicone which withstands very high temperatures.   Applications:     • Sealing of heating installations. • Sealing in pumps and engines. • All sealing applications that require high temperature resistance. Characteristics:     • Permanently elastic after full cure • Neutral cure, high modulus • High adhesion force • Temperature resistance up to 280°C   Product Features:     • Silirub HT°-N is a neutral cure, elastic, single component silicone sealant. • Silirub HT°-N is permanently elastic after full cure. • Silirub HT°-N has temperature resistance up to 280°C. • Silirub HT°-N has high adhesion force.   

POLYSULPHIDE SEALANT is a one component, gun applied, synthetic rubber based sealant which cures by absorption of atmospheric moisture to form a permanently flexible seal. It is suitable for use within the construction industry on all joints where above average repeated movement is encountered over a wide temperature range. It provides outstanding resistance to weathering and chemical attack from solvent, alkalis, dilute acids, oils and grease. ltra low” (UL) additive that generates less viscosity than regular‐viscosity products. POLYSULPHIDE SEALANT cures relatively slowly, therefore applications must be restricted to those where little movement will occur before full cure has been achieved. This will apply particularly where joints could be subject to foot or wheeled traffic and hydrostatic pressure.

We are offering Joint Sealants at very market leading prices company.

• Packing: Available in 12 kg pack (6 kg unit x 2 no).

ShaliBond S is a two component, solvent free, thixotropic, structural adhesive especially formulated for segmental bridge construction. ShaliBond S meets the requirements of FIP and ASTM D 648. High strength and high modulus of elasticity. • High initial and ultimate strength. • Impermeable to liquid and water vapour. • Suitable to dry and damp concrete surfaces (moisture tolerant). • Hardening is not affected by humidity. • Thixotropic:non sag in vertical and overhead application. • Solvent free. • Hardens without shrinkage. • No primer required. • Good chemical resistance.

• Brand Name: Loctite
• Country of Origin: Made in India
• Packaging Size: 250 ml
• Packaging Type: Bottle
• Application Industry: Automotive
• Surface Of Application: Plastic

MYK LATICRETE Tile Adhesive is a factory made cementitious dry powder which is mixed with water or special liquid additive to form a paste. This paste is applied on the floor concrete and the tile is pressed on it to complete installation. MYK LATICRETE Tile Adhesives provide:

waterproof sealant, Waterproof Materials

  Fleet's high temp. Red, Black and Clear RTV silicone makes reiable "formed-in-place" gaskets that resist cracking, shrinking and migrating caused by thermal cycling.

Description : To modify handle of garment & body booster.Use : Handle modifier

8 Oz Tire Sealant, 24 Oz. Tire Sealant, Slime 16 Oz Tire Sealant, Valve Caps

industrial sealants, Silicone Sealant, wall tile adhesives, Tile Adhesives

structural glazing sealants, Silicon Sealants, liquid nails

water coating systems, water treatments chemicals, Construction Chemicals

Dow Corning Structural Glazing Silicone Sealant

reticulated foams

Polyurethane Sealants

Polyurethane Sealants, Silicon Sealants, polyurethane foams

Silicone, Activated Carbon, Chemical Products, Coating

high temperature sealant

pipe thread sealant, Snagging Wheels, Anaerobic Retainer

insulating silicone sealants, Tempering Furnace, dual-seal insulated glass

Diamond Tools, Edge Grinder, Wood Sanding Machine, Floor Polishing Machine

foam sealant, silicone adhesive, silicone sealants adhesives

Flooring Compounds Construction Chemicals, Water Proofing Coating Chemical