Adhesives,Glues and Sealants Dealers in New Friends Colony, Delhi

• Brand Name: Lord
• Product Code: 220
• Weight: 1Ltr
• Appearance: Black Liquid
• Solvents: Xylene, Perchloroethylene
• Flash Point (Seta), °C (°F): 28 (83)
• Solids Content by Weight, %: 23 - 27

LORD Chemlok® 220 adhesive is a covercoat adhesive designed for use over Chemlok 205 primer. This adhesive system will bond a wide variety of elastomers such as natural rubber (NR), styrene-butadiene (SBR), polychloroprene (CR), nitrile (NBR) and polyisoprene (IR) to various metals and other rigid substrates during vulcanization of the elastomer. It is composed of a mixture of polymers, organic compounds and mineral fillers dissolved or dispersed in an organic solvent system. Shelf Life Shelf life is two years from date of shipment when stored at 21-27°C (70-80°F) in original, unopened container. Do not store or use near heat, sparks or open flame.   Features and Benefits Versatile – bonds a variety of elastomers and metals when used in combination with Chemlok 205 primer. Environmentally Resistant – provides superior resistance to heat, water, salt spray, chemicals, oils, solvents and corrosive atmospheres. Easy to Apply – applies easily by dip, spray or brush methods. Application Surface Preparation – Thoroughly clean metal surfaces prior to adhesive application. Remove protective oils, cutting oils and greases by solvent degreasing or alkaline cleaning. Remove rust, scale or oxide coatings by suitable chemical or mechanical cleaning methods. Chemical Cleaning - Chemical treatments are readily adapted to automated metal treatment and adhesive application lines. Chemical treatments are also used on metal parts that would be distorted by blast cleaning or where tight tolerances must be maintained. Phosphatizing is a commonly used chemical treatment for steel, while conversion coatings are commonly used for aluminum. Mechanical Cleaning - Grit blasting is the most widely used method of mechanical cleaning. However machining, grinding or wire brushing can be used. Use steel grit to blast clean steel, cast iron and other ferrous metals. Use aluminum oxide, sand or other nonferrous grit to blast clean stainless steel, aluminum, brass, zinc and other nonferrous metals. For further detailed information on surface preparation of specific substrates, refer to Chemlok Adhesives appli-cation guide. Handle clean metal surfaces with clean gloves to avoid contamination with skin oils.

• Brand Name: CICO TILFI NSA
• Model Number: CICO TILFI NSA
• Place of Origin: INDIA

We are offering structural adhesives. Tile & structural adhesives cico tilfi nsa single pack tile adhesive for wall and floor. features can be used on dry as well as damp sustrates. Offers good adhesive bond strength slip -resistant high early strength non -shrinking fast curing long open time ( up to 25min) in wet state eco friendly -offers no health hazard to users. No curing is required economical usage bonding indoor ceramic, mosaic tiles to concreteplastered surfaces, floors and walls. method of applications suface must be structurally sound and free from dust, grease, oil etc about 250-300ml of water to be mixed for each kg of cico tilfi nsa. Add powder gradually to water and mix until a uniform, lump-free consistency is obtained spread out the above paste on the substrte to a uniform thickness bed of 34 mm by using a sutable notiched trowel having notching angle 45 degrees to teh surface. pack size : 20kg hdpe bags shelf life: 12 months

• ADHESIVE TAPE: SKIN

Adhesive tapes are extensively used for diverse commercial and household uses. Available in various sizes.

• Brand Name: Loctite
• Country of Origin: Made in India
• Packaging Size: 250 ml
• Packaging Type: Bottle
• Application Industry: Automotive
• Surface Of Application: Plastic

Adhesive Remover- Transparent solvent mixture suitable for removing fresh glue stains and for the cleaning and degreasing of metal surfaces.   Applications: Transparent solvent mixture suitable for removing fresh glue stains. Cleans brushes, palette knives and spatulas. Removes hard excess contact glue. Not suitable for polystyrene and plexiglas.    

Peakward Group is a major Cement Supplier and Exporter in world marke In 1990 Peakward began its operation with exporting Chinese and Indonesian Bagged Cement to Bangladesh where it occupied 30% market share of Cement. Gradually sourcing was expanded to worldwide and Peakward developed close relationship with major Cement producers of world market. “Eagle Star” Cement brand of Peakward is already famous in many Countries for its excellent quality and price. Which is a most preferred brand by our customers worldwide. Now Peakward can supply huge quantity of Bagged & Bulk Cement as per customers’ quality and quantity requirements. Highlight: From 1990 Peakward began its operation with exporting Chinese and Indonesian bagged Cement to Bangladesh where it occupied 30% market share of Cement. Peakward was a listed Cement supplier for UNICEF and supplied Cement to UNICEF projects in Bangladesh and Vietnam. Peakward was the first company to supply Indonesian bulk and bagged Cement to Egypt in 1998/1999. Peakward delivered bulk Cement to 4M floating Terminal of Mr. Mansour in Alexandria and supplied bulk cement to HC Trading for floating terminal in Damietta. Peakward trade & supply all grades of quality Cement conforming to the following standards: 

High bond strength and water resistance. * Increased flexibility and resistance to weather conditions. * Improved shock and impact resistance * Easy to install – fast and economical * Hassle-free and long lasting

• Pack size:: 20kg bag

Its characteristics are: Can be used on dry as well as damp substrates Offers good adhesive bond strength Slip-resistant High early strength Non-shrinking Fast curing Long open time (up to 25min) in wet state Eco friendly – offers no health hazard to users No curing is required Economical

• Brand Name: CTS Restoration Products India
• Packaging Size: 1 Kg and also available in 5 Kg, 20 Kg, 120 Kg
• Grade Standard: Conservation Grade
• Packaging Type: Plastic Bucket,Drum
• Product Name: Peoval 33

We bring you one of the finest Gelatin Adhesives; PLAKAL manufactured by a 130 year old company Fritz Hacker Gmbh, Germany. Plakal is based on renewable raw materials and jelly glued consisting primarily of protein and other quality additives giving it its required properties. The components of the formulation are virtually 100% biodegradable. No negative effects, either economic or ecological on the recycling of paper or cardboard. “ Stickies” are not formed. Why use PLAKAL? Because it is a Natural Adhesive What else!– adapted to the latest machine generations– Simple and clean application even with high work cycles– Universal application – even in extreme climatic conditions– High initial strength even before it has completely set– Even higher final strength after setting– Biodegradable and highly recyclable– zero health risks also during processing– No swelling or waving of paper– Elastic, stress-free setting– Price-performance ratio that holds its own PLAKAL can be used on :Case Makers like: Kolbus, Hauraf, Sthall.Book lines like: Kolbus, VBF, Sthall, Diamante.Box Making Machines: Emmeci, Zhengrun, Zhonke, HongmingSemi-Automatics- Fortec, Megabound, Hongming, Zhengrun

• Form: Liquid
• Ph Value: 4-6
• Packaging Size: 5kg, 10kg, 20kg, 50kg
• Origin: Synthetic
• Packing Type: Bucket

• Colour: Black
• Packing: 18 kg and 200 kg drum.

Bitumen based sealant for concrete joints resistant to high temperature variations providing waterproof sealing for all type of horizontal joints. It is conforming to IS 1834 – 1984, Grade A specification.

Book shelves this versatile Set of 4 Bookshelves- book racks and storage units can meet all your home and office storage needs. It's Classic Wenge finish and refined lines harmonise seamlessly with virtually any decor. Adjustable shelves can be arranged according to your needs.

water base adhesive, Oil Based Shuttering Oil

It is a cold applied bituminous adhesive for fixing waterproofing membrane. It is manufactured from special grades of bitumen, suitably blended with other additives. It has semi-liquid consistency and is ready to use. Application : . it is recommended for sticking roofing felts on metal, timber, tiles, asbestos, concrete and masonry surfaces, including roofs of trains, buses, tramcars, railway carriages, etc. . it is cold applied adhesive and does not require any torching. Therefore, it is useful for applications where use of hot bitumen torching is difficult or prohibited.

• Country of Origin: India

Cleaner for removal of polyurethane adhesive used in hot lamination

It is a cold applied bituminous adhesive for fixing waterproofing membrane. It is manufactured from special grades of bitumen, suitably blended with other additives. It has semi-liquid consistency and is ready to use.

epoxies, water coating systems, water treatments chemicals, admixtures

hand held calculators, sticky pads, Printer Cartridges, Paper Rolls

Adhesives, Sealants

structural glazing sealants, Silicon Sealants, liquid nails

24 Oz. Tire Sealant, Slime 16 Oz Tire Sealant, 8 Oz Tire Sealant, Valve Caps

automobile adhesives, household adhesives, engineering adhesives

foam sealant, silicone sealants adhesives

PVC Adhesive Glue, Plastic Board, PVC Strip Rolls

structural adhesives, Silicone Sealant, wall tile adhesives, Tile Adhesives

ADHESIVE

We are offering cement wall putty white cement.