Aerol Formulations Pvt. Ltd. Bali Nagar, Delhi

Cleans environmental grime, bird dropping, dust and dirt with easeAmmonia free formula Improves visibility & reduces night glareExtends life of windscreen and wiper blades Provides top-up for one year approximately Safe on paintwork . APPLICATIONS:   Used to clean windscreen, mirrors, glasses, etc.

A semi-synthetic, high performance green, based on synthetic & mineral oils thickened with Lithium soap complex. It is designed for superior lubrication and excellent water washout resistance in many automotive & industrial applications.

Quick and easy to use. Non-oily, non-greasy finish. Smudge & streak resistant finish. No increased dust attraction. Improves life of paint. APPLICATIONS: Used to cleans, shines & protects painted surfaces of car. For both interior & exterior use.

Instant shine for two wheelers. High gloss on painted metal, plastic and rubber surfaces. Prevents damage from light radiations. APPLICATIONS:   Cleans, shines and protects metallic, plastic as well as rubber surfaces of bike.

Prevents the wear and tear of treadmill belts and keep it in good condition. Free from Chlorinated solvents that effect rubber and is highly adhesive to both belt and deck which ensures longer lubricant life. Keeps rubber belts soft and supple and does not over lubricate that causes ‘slip’ in belt or does not creep or flow out of belt. APPLICATIONS: Used basically for treadmill belts. PACKING: 24 cans in one corrugated carton.

Cleans, Shines & Protects Keeps tires and rubber parts soft and supple. Keeps rubber soft, supple and lubricated. Protects rubber from drying due to environmental attack. Prevents abrasive wear of side walls. Prevents hard adhesion of dirt. Minimal dust attraction APPLICATIONS: Renews & rejuvenates rubber surfaces, cleans, shines and protects against weathering and ageing.

Synthetic hydrocarbon based, non-soap, no- staining, non- toxic, water, acid and saline solution resistant grease for applications having possibility of incidental food contact. Excellent rust and corrosion protection, oxidation resistance and wear prevention properties. Most suited for canneries, bottling plants, sanitary equipment, meat and poultry plants. Also used as contact grease mainly on tin- lead electrical connectors. Serviceable Temperature: -50°C to 160°C Pack Size: 1 Kg

PAO based high temperature resistance, non-toxic lubricant for Chains. Suitable for incidental food contact. Serviceable Temperature: -35°C to 250°C .

A unique cleaning preparation and that removes most oil, grease spots and stains from several types of fabrics and clothing. APPLICATIONS: It is used in several types of fabrics and clothing such as cotton, wool, silk, denim etc. PACKING:  24 cans in one corrugated carton

A pressurized solution of Silicone Fluids. It acts as a non-toxic, non-staining, non-­carbonizing and high and low temperature resistant lubricant. APPLICATIONS: Commonly used on delicate machines, components, sensitive plastic, rubber articles and components. They can also used as release agents in several application. PACKING:  24 cans in one corrugated carton

Afra® 4015 is Methyl Hydrogen Polysiloxane fluid containing reactive Si H groups and has several outstanding applications.   KEY FEATURES:   Cures to form a durable film Colorless, odorless, Non-Toxic in nature Dilute able with hydrocarbons, chlorinated hydrocarbons, ethers, esters, aromatic ketones, ethyl alcohol (99.5%) and higher alcohols. Insoluble in water, methanol or ethanol (96% or less).   APPLICATIONS:   Modification of unsaturated organic compounds such as polyester and methacrylate resins by absorption. As a water repellent and impregnating agent for textiles, paper and leather. Prevents agglomeration and improves free properties of powders such as mica, clay, silica, Dry Chemical Powder for Fire Fighting. Suitable for water-repellent treatment of gypsum plasterboard and solid gypsum sheeting.   PACKING:   Afra® 4015, Methyl Hydrogen Polysiloxane Fluid is available in 35kgs & 200kgs HDPE Carboys.  

Afra® Silicone Emulsions are water diluteable emulsion of Poly-methyl siloxane fluids. KEY FEATURES: These silicone emulsions are chemically inert, non toxic, non-flammable and non-harzardous. They possess low surface tension and superior wetting properties. These silicone emulsions are particularly suited for mould release applications during rubber moulding and metal casting because they form films of low adhesion and therefore be applied to moulds to prevent adhesion of the moulded articles.  APPLICATIONS: They are also used as water solutable lubricants, paper and textile finishing agents and as a polish ingredient, various grades of silicone emulsions are being formulated with respect to their solid contents.

Restores, renews, rejuvenates and conditions rubber and plastic Prevents sticking and aging of rubber. Protects against environmental damage. Lubricates without staining. Compatible with most plastics APPLICATIONS: Commonly used on delicate machines, components, sensitive plastic, rubber articles and components.They can also used as release agents in several application.

A air-drying, single component, solvent based, preparation which cures to form a tough, transparent and flexible film on the surface to which it is applied. It is a useful product for protection of articles subject to weather, moisture, extreme temperature, chemical and dust attack. APPLICATIONS: It meets requirements of Aerospace and Defence, Telecommunication, Automobile, Appliance and Electronic Industries for printed circuit board protection. PACKING:  24 cans in one corrugated carton

Primer less, Heat Resistant, Anti-corrosion coating for long term protection. Quick drying. Available in silver and black color. APPLICATIONS: For long term protection of silencer of two or four wheelers.

Provides a durable parting film which is colourless, heat stable and suitable for all organic rubbers, thermosets and Polu -ur. • In most cases, a single application provides multiple release cycles. It is free from Silicone Oil, waxes and other carbonizing materials. • It’s low solvent content, non-oily type, low deposit, mist spray which ensures negligible transfer of mould release to the moulded article. APPLICATIONS: • Designed for use as Mould Release Agents for most injection moulded plastics and organic rubbers such as EPDM, Neoprene, Viton, Nitrile etc. PACKING: • Net Contents per can: 250g/414ml • 24 cans in one corrugated carton

Unique & Decorative air-freshening concept. Works 24 hours, non-stop.   REED DIFFUSERS (110 ml)   Lasts upto 4 weeks. Suitable for rooms & washrooms upto 1000 cu.ft area. Available in 6 fragrances: English Lavender, Citrus Lemon, Cherry Blossom, Lemon Grass, Tea Rose & Green Apple.   REED DIFFUSERS (50 ml)   Lasts upto 3 weeks. Suitable for rooms & washrooms upto 600 cu.ft area Available in 6 fragrances: English Lavender, Citrus Lemon, Cherry Blossom, Lemon Grass, Tea Rose & Green Apple.  

A low friction assembly and running in and surface treatment lubricant, Ideal for press fitting and surface treatment of sliding parts under extreme loads, pressure and temperature. It prevents seizing, fretting corrosion, scuffing and stick-slip. Suitable for mounting of press-fits, assembly of seals and screws, running in treatment of rolling and sliding bearings, running in and lubrication of joints and guides of sliding surfaces, open gears, etc. APPLICATIONS:  Press fitting and ‘running in’ of plane bearings and all sliding surfaces. Assembly of pin bearing, pistons, gears, wheels fly-wheels, key-ways. Bolt screws and nuts, bushings, spline, shafts, slide-ways guides. Universal Joints, chucks, machine tools etc. Assembly, repair and maintenance in all mechanical area. Serviceable Temperature: -30°C to 450°C Pack Size: 1 Kg

Fast acting, active, cold cleaning preparation, viscous & non-flammable, Acid & alkali-free, removes most paint & varnishes, safe for use on wood, plaster, metal & glass, aids removal of gaskets & sealants. Good washable with water after use & low effect on the climate. APPLICATIONS: Used for removing persistent residues such as residues of sealants, paints and adhesives, gaskets, bitumen & tar splashes. Also applicable to surface of metal, stainless steel, glass, wood & ceramics

Made from a proprietary formula of natural plant extracts, ethyl alcohol and deionized water. This revolutionary product traps odour molecules and neutralizes them. It eliminates common odour of: ~Pets & Animals          ~Human sweat & waste ~Toilet smells               ~Tobacco & smoke ~Food                             ~Garbage It is most useful in Homes, Commercial Establishments and Transportation vehicles such as Cars, Buses, Trains and Air-crafts for odour removal from Washroom, Kitchen, Laundry, Drain, Sink & Garbage bin. It is also useful in Industrial establishments, Meat processing factories, Slaughter Houses etc. for elimination of mal odour. Unique formulations based on natural plant extract. Eliminates mal odour from pets, animals, human sweat & waste, toilet & washrooms, tobacco & cigarette smoke, garbage, food etc. Non-toxic & safe to use in kitchens and homes. Long lasting freshness as odour causing molecules are neutralized.

Non-pressurized natural spray.Most suited for personal use in cars & small rooms.Contain alcohol for disinfection.Fragrance lasts upto 4 hours.Net Content: 75 ml .

Available as a 3 part system for quick and easy visual detection of flaws and cracks. Each set consists of a Penetrant Spray, a Cleaner Spray and a Developer Spray. Meet requirements of ASTM E 165-95 & IS 3658 (1999) for Solvent Removable Penetrant, Non-Aqueous Wet Developer and Solvent Cleaner. Meets requirements of IS 3658 (1999): Code of practice for Liquid Penetrant Flaw Detection. Meets RDSO Specification no. M&C/NDT/105/2001 Extremely low chlorine and sulphur contents. Non-corrosive to most metals.   APPLICATIONS: Quick and easy visual detection of flaws and cracks in various metallic surfaces. Suitable for use throughout industry in areas such as Automotive, Welding, Engineering, Construction, Ship building, Machining. It reduces the need for immersion tanks or electrical detection equipment. It is ideal for use during welding, repairs and general maintenance. PACKING:  24 cans in one corrugated carton Net Content: 250 g  DIRECTIONS OF USE: 1. Clean the area to be treated with the Cleaner Spray to remove oil, greases, dirt and other contaminants. Spray the cleaner and allow to evaporate for about 30 seconds. Wipe off excess with a clean dry cloth. 2. Spray the Penetrant spray on the cleaned surface and allow dwell time of 20-30 minutes. Remove excess Penetrant with a dry, clean, lint free cloth. Further clean with a cloth moistened with the Cleaner Spray to remove excess. Do not spray the Cleaner directly on the area treated with the Penetrant as it may remove the penetrant indications. 3. Spray the Developer on to the area of inspection as an even, thin film. Allow about 10-20 minutes for the developer film to highlight the cracks and flaws, if any. The defects will show up as red lines or dots.

Aerol Speciality lubricants are lubricating chemical preparations designed for equipment working under extreme conditions of temperature, load, wear and environment where normal petroleum lubricants fail to satisfy. These speciality lubricants are capable of withstanding extreme conditions and provide benefits such as reduced wear, reduced consumption of energy and lubricant, longer re-lubrication intervals, cleaner equipment and work places.

Excellent EP, AW, Anti-rust property with ability to handle very high loads and shock loads. Forms a film of solid lubricant that provides additional lubricity for all types of bearings, machine elements and industrial applications. Serviceable Temperature: -30°C to 150°C Pack Size: 1 & 21 Kg .