Air Samplers Dealers in Delhi

Moreover, exhaust has an internal HEPA filter before passing through the external exhaust port. Standard sanitary fittings allow easy assembly for permanent installation. It was designed to be easily integrated into isolators using standard stainless steel sanitary couplings and Tri-Clamps for customized, permanent installations. It is controlled and monitored through standard Ethernet. Delayed and segmented sampling allows an entire process to be monitored and set up in advanc

• Type: High Volume Air Sampler, Air Samplers
• Application: Air Sampling
• Rated Voltage: 220V
• Rated Power: 1-3kw
• Power Source: Electric
• Warranty: 1yr
• Automation Grade: Automatic, Semi Automatic
• Color: Gray

application: technogroovy's high-volume device is an essential device primarily used to measure the concentration of suspended particles in air. By definition, the suspended particles are very small, have a noticeable rate of decline, and are likely to remain in the atmosphere for significant periods of time. The size of these particles usually ranges from approximately 1   to 100 μm.  the total suspended particulate sampler or the tsp large volume air sampler is used to collect the total suspended particulate matter in the surrounding air, where size selection is not preferred. Epa reference method. United states of america for the tsp group.    technogroovy's high-volume air sampling collects particles at a flow rate of 40-60 feet  during a continuous sampling period. The tsp oversized air sample is used to determine the total suspended particle concentration or can be used to determine the particle identity.  technogroov's oversized air samples come in a variety of configurations. The platform consists of an anodized aluminum exterior shelter with a flexible roof group. This will include a timer for turning the instrument on and off, a filter holder for the filter media nodes, a vacuum drive, a flow control device, a pressure logger for recording the flow, and the elapsed time indicator for the time calculation. A sample. specification: •             flow rate 1.1to 1.7 cu m/min •             particle size down to 1.6 micron depending upon filter used. •             recommended filter : gf/a (8” x 10” ) for common use and epm 2000 for special research use. •             sampling time record :  0 to 99999.99 hrs. Time totalizer records the running time in hours. •             automatic sampling : 24 hour programmable timer, required intervals can be conveniently programmed. •             power requirement  : 220 volts, 2 amps, single phase ac. •             size :  with gable roof 440mm (l) x 440mm (w) x 820mm (h) •             weight :  25 kg     

technical specifications:- particle size: omni-directional air inlet with pm 10 separation through an impactor followed by pm 2.5 separations through a wins impactor sampling rate: constant sampling rate of 1m3/hr unaffected by voltage fluctuation and filter choking maintained by critical orifice system. filter media: filter holder designed to accept any standard 47 mm diameter filter media. Sample volume: dry gas meter records the total air volume sampled. Power requirement: single phase ac 220 volts, 50 hertz supply. Sampler unaffected by +/- 10% fluctuation in supply voltage.

• Applications:       Surveillance of critical areas
• Principle: Wet Cyclone
• Collected particle size:       > 0.5 μm
• Air flow rate:       600 L/min
• Collection Time:       5, 10, 15 min - 2 hours with option
• Watertight:       Yes – IP54
• Dimensions(L x I x h):     365 x 220 x 306 mm (without cane)
• Weight:       10 kg (20 kg with case)
• Autonomy:       1h (collection time)
• Main supply:       100-240V
• Operating temperature:     +5°C to +49°C (+41°F to +120°F) 0°C to +50°C with the “winter pack” option

ct design of these models also helps in convenient field operation. Most of the leading environmental consultants and many public and private sectors are using the fine sampler models we provide in the market. We ensure to use the best quality materials and hardware to manufacture and supply our products. The model comes with standard, intermediate or deluxe pump with simple on/off control. The simplicity and reliability of the pump make it as the best entry level pump. Therefore, it is also great for gas and dust sampling projects. Our pump models are available in three variations which are the 224-50MH Standard pump, 224-51MTX Intermediate pump and 224-52MTX Deluxe pump. Most of the hazardous chemical vapours and gases from the air are collected by the long duration detector tubes and Sorbent sample tubes. The respirable dust is collected with the cyclones and the inhalable dust is collected with the IOM samplers. There are also filters for collecting total asbestos, dust and chemical. Features and Specifications: • ATEX approved and CE marked • Operational range of 5-3000 ml/min • Rechargeable NiMH battery • Timer with LCD for indicating the run time battery status and the flow fault • Sidekick sampling pump • Wide flow range which is 5-3000 ml/min

• Country of Origin: Made in India
• Weight: 20 Kg
• Airflow: 1.7 m3/hr
• Voltage: 220 V
• Brand Name: KMCR
• Model No.: KMCR-542

  Sampling Rate 0.5-1.0 LPM. Diaphragm pump, Flow Adjustment, for needle valve. Operating time 08 hours after charging. NI- Cad. Rechargeable Battery. Charger us in built. Timer. Filter holder in Two size i.e. 25mm and 47 mm Dia. Power required 230 V, 50 Hz. Single phase A/c. Dimensions: (230 X 125 X 215) mm. Sampling Devices: Charcoal Tubes for volatile samples. Impingers Cap. 35 ml. For Gaseous and Filter Holder for SPM.ACCESSORIES Impinger: 04 Nos. Acrylic Holder: 01 No. Filter paper Pkt. Of 100 Sheets

• Type: High Volume Air Sampler
• Application: Air Sampling
• Rated Voltage: 220V
• Power Source: Electric
• Warranty: 1yr
• Automation Grade: Automatic

We manufacture, export, and supply a supreme range of High Volume Air Sampler across the globe. The quality tested High Volume Air Sampler provided by us conform to guidelines of Central Pollution Control Board. It is used to monitor the air to determine the extent of pollution and to identify the source of emission at regular interval of time.

Climet microbial air samplers are the first, and today the only impaction sampler designed and engineered to meet all ISO 14698-1, GMP Annex 1, and pharmaceutical standards and recommendations. These include a stainless steel enclosure, aluminum or stainless steel sample heads, a patented HEPA filtered internal exhaust, validated flow control with a flow rate alarm, physical and biological efficiency tested, and more. Climet’s microbial samplers are serious instruments for those who are serious about cleanroom environmental monitoring.  

• Features: Optional solar panel can allow for indefinite operation without charging or connection to an AC power source

The BGI PQ200 FRM Sampler uses BGI pioneering technology to meet and exceed the requirements for ambient particulate sampling dictated by the U.S Environmental Protection Agency. This includes the design of reliable PM10, PM2.5 and PM1 Inlets, volumetric sample flow rate control, data logging and software for report and data processing.

• Flo Rate: 0.8 to 1.8 m3/min
• Particle Size: Down to 1.6 micron depending upon Filter used
• Blower:: Continues duty blower with brushless Motor
• Recommended filter: GF/A (8” X 10”) for common use, EPM 2000 for Special Research or equivalent
• Time Record: 0 to 99999.99 hrs. Time totalizer records the running time in hours
• Timer: 24 Hr Programmable timer, number of required intervals can be programmed

he high volume air sampler collects suspended particulates on large filter paper The name high volume is appropriate because the sampling flow rate has a high level of 20 to 60 standard cubic feet per minute (SCFM). Because of the high flow rate, large quantities of particles ranging from 0.1 to 1 gram are collected over a typical 24-hour sampling period   Characteristics: Brushless Blower, Low running cost, Low noise operation, Controlled flow, Light weight and small in size, Drain plug for manometer.

• Sampling Rate: 2.5 LPM
• Running Time: 1 – 999 Min
• Delay Time: 1 – 99 Min
• Timer: 3 digit display
• Power Supply: 230+/-10V AC, 50Hz
• Operation Time: 8 hours with full charge
• Weight: 1.5kg

• Material: Aluminium
• Brand Name: Greentech Instruments
• Automation Grade: Manual
• Weight: Approx 3 kg
• Model Name/Number: GTI-177
• Usage/Application: Benzene Sampling
• Airflow: 0 to 200 ml
• Color: off white

• Power Source: Electronic
• Country of Origin: Made in India
• Weight: 20KG
• Airflow: 1m3/hr
• Frequency: 50Hz AC mains supply.
• Voltage: Nominal 220 V, Single Phase
• Item Code: GTI-FPS-375-MINI

Based in Delhi, India, we are widely acclaimed as an eminent Manufacturer, Exporter and Supplier of Passive Air Sampler. The less sensitivity to inadvertent short time, changes in the concentration of noxious waste, is the key feature of our Passive Air Sampler. It helps in providing the exact information about the long-term pollutants. Buyers are free to place bulk orders and we ensure their safe and timely delivery.

• Brand Name: Technogroovy
• Model Number: 8218470498
• Power: Electronic
• Place of Origin: India

Sampling Rate 0.5-1.0 LPM. Diaphragm pump, Flow Adjustment, for needle valve. Operating time 08 hours after charging. NI- Cad. Rechargeable Battery. Charger us in built. Timer. Filter holder in Two size i.e. 25mm and 47 mm Dia. Power required 230 V, 50 Hz. Single phase A/c. Dimensions: (230 X 125 X 215) mm. Sampling Devices: Charcoal Tubes for volatile samples. Impingers Cap. 35 ml. For Gaseous and Filter Holder for SPM.ACCESSORIES Impinger: 04 Nos. Acrylic Holder: 01 No. Filter paper Pkt. Of 100 Sheets

Local Air Quality Sampler Envirotech, air monitoring equipment

Air Sampler, HEPA / ULPA Filter Integrity Test, Air Capture Hood

microbial air sampler, Pure Steam Quality Test Kit, air particle counter

air samplers, Wireless Weather Station, Windsock, air quality monitors

Biological Air Sampler, Agriculture Equipment, air analysis meter

portable air sampler, stability chambers, industrial electric ovens

Passive Air Sampler, Xenon Test Chamber, Chemetrics Water Test Kits

Mini Fine Particulate Sampler, High Volume Air Sampler

Microbiological Air Samplers

microbial air samplers

Fine Particulate Sampler, Ozone Analyzer, dust monitoring system

Advanced Microbial Air Sampler