Analyzer Equipment Dealers in Delhi

• Manufacturer: PDI
• Model Number: PAK,PAX

The PDA verifies the bearing capacity of all types of drilled or driven deep foundations. Tests are quick and non-destructive. Pile Driving Analyzers acquire data from acceleration and strain sensors attached to the foundation, and process these signals as the foundation element is impacted by a pile driving hammer or other suitable drop weight. This process is called High Strain Dynamic Test, and may take the form of Dynamic Pile Monitoring or of a Dynamic Load Test. Dynamic Pile Monitoring is performed during initial driving of piles and provides information on driving hammer performance, driving stresses, pile integrity and capacity at the time of testing. When performed on test piles it can help establish a driving criterion, and during the production phase it contributes to a safe and economical pile installation. Dynamic Load Tests are performed on drilled shafts, continuous flight auger, cast in situ or driven piles to determine their ultimate bearing capacity. The test consists of acquiring PDA data and analyzing it with the CAPWAP® software. Dynamic Load Test results correlate very well with foundation capacities obtained from conventional static load tests. The test also confirms the structural integrity of the foundation element.

• Application: Laboratory Use,Industrial Use,POWER PLANTS
• Display Type: Digital
• Weight: Approx. 900g
• Phase: Three
• Max Spark probe: 671 nm
• Min Spark probe: 180 nm

At Aimil, we bring to you a large range of site speed analysers that helps you to measure with confidence. Our range of offered products can be used in all the toughest situations. The analysers are designed to offer precise and accurate results. With our expertise in the domain of site speed analysers in New Delhi, as the reputable site speed analyser manufacturer, we also provide you with an exhaustive kit for your everyday use. The analyser for cable and antenna testing that we offer for our customers is aided with the important and measurement capabilities needed for maintaining and installing antenna systems in the respective fields. We are always chosen for being the most reliable site speed analyser exporters in India. Site Speed Analyzer Exporters from Delhi The exclusive features of the product ensure efficient and quick antenna and cable measurements and spectrum examination. Our different models are designed to cater to various needs. The analysers offered by us boost up quickly and needs a minute to warm up, and can henceforth begin instant measurement. No wonder, why we are the favourite site speed analyser supplier in India. The prompt measurements of the analysers provided by us are the best in its types and its configuration menu lets you see and change the settings of the parameters with a simple keystroke.

Online Capture of Weighing Data Simultaneous Fat & SNF Analysis Provision to store more than 2000 records Electronic transfer of data to Chilling Centre/Plant/Central Office Ultersonic De-Airator Sample Time – < 32Sec. /sample Built in Calibration Easy to Clean – Single Cell Digital Display Small & Portable Measurement of fat (FAT), solids non-fat (SNF), density, proteins, lactose, salts, water content percentages, temperature (°C), freezing point, pH, conductivity, as well as total solids of one and the same sample directly after milking, at collecting and during processing. With 12 V adapters, milk analysis can be moved on the milk collection trucks. Easy to work with, low cost maintenance and low price make milk analyzer suitable for dairy farms, dairy enterprises, milk selection centers and laboratories.

• Model Number: LT-101A
• Voltage: 3V
• Current: 0.010A
• Frequency: DC, 20Hz
• Power Source: Electric
• Measurement accuracy: 0.1% F.S. 0.1% R.D.

• Weight: 8.5 to 12.5 kg,depending on model
• Brand Name: R&S
• Frequency: 5 ppm
• Power Requirements: AC and DC (AC: 90V to 256 V,50HZ to 60 Hz)
• Power Accuracy: 0.3 dB
• Frequency Step Size: 200 kHz
• Power Resolution: 0.1 dB
• Adjustable Power Range: 24 dBm to 46 dBm x 2 (250 mW to 40 W x 2)
• Residual Intermodulation Level: -122 dBm (typ. -125 dBm)
• Measurement Sensitivity: -135 dBm
• Noise Floor: -136 dBm
• Reverse Power Protection: 13 dBm (20 mW) continuous
• Measurement Method: one port,reverse PIM
• Real Time PIM: 3rd and 5th PIM
• PIM vs Time: 3rd and 5th PIM
• PIM Location (PIMPoint): distance in meters or feet with VP Settings
• RX Interference: receive only mode,noise floor measurement
• Frequency Sweep: frequency response
• Battery Operation: >3 hours
• Alarms: audio and visual
• Display Size and Type: 8.0" [203.2 mm] capacitive TFT (industrial grade)
• Data Ports: 3 x USB 2.0,1 x Ethernet LAN port
• Remote Control: WiFi enabled (802.11)
• Battery Power: 28 VDC
• Battery Capacity: 5.8 AH
• Battery Type: Li-polymer removable battery pack
• Max. Power Consumption: 340 W
• RF Output Connector: 7-16 DIN female
• Dimensions (W x H x D): 350 x 230 x 114 mm
• Operating Temperature range: -10 DegreeC,-45 DegreeC,95 % relative humidity
• Storage Temperature Range: -30 DegreeC,-60 DegreeC,85 % relative humidity
• Accessories Included: DC adapter,operation manual

In modern food processing operations, reliable and accurate analysis solutions are necessary to provide customers with products of highest and - what is most important – consistent quality. In order to be most competitive in the world market, consistent high yields, top quality and low production costs are the objectives that need to be achieved. Designed as a modular system, the SpectraAlyzer® food solution presents the quantitative analytical results of major quality parameters (e.g. moisture, protein, fat, sugars, starch, acidity, salt, ash) and many others within 45 seconds. There is no need to manually condition the sample and extra reagents do not have to be used. This analyzer solution provides highly accurate quality control parameters at no extra cost. As a stand alone system the SpectraAlyzer® food can be operated very easily and intuitively – even close to the production line. The rugged construction and unique optical samplereference setup ensures reliable operation in environments with fluctuating temperatures, vibration and dust.

• Rapid Analysis Test: Less than 7 minutes.
• Adjust mixing time: 5 up to 75 seconds
• Washing time: 60 to 900 seconds
• Screen type: Touch Screen

• Model Number: EEMTL71M0022
• Size: L112×W75×H92cm
• Weight: 266 kg / 586 lb
• Categories: Material Lab
• Focal length of grating: 750mm
• Wavelength range: 130-650 mm
• Pulse amplitude: +15KV
• Discharge frequency: 100 -1000Hz
• Inlet pressure: 0.5MPa
• Excitation flow: 3L/min

sulphur analyzer equipment, carbon testing equipment, Lab Equipment