Anita Distributors Pvt. Ltd. Kirti Nagar, Delhi

The product is used to increase the brilliance of polished surfaces such as granite, marble, agglomerates and terrazzo or to brighten the polish dulled by time application increases the polish from a minimum of 5-6 points of gloss to a maximum of 15-16. The wax is formulated with extra-pure, special white wax products dissolved in solvents that improve their penetration in the treated materials, so as to produce a more long-lasting action.

Mastic for stuccoing, gluing, and repairing marble, granite, natural stone and agglomerates. LIQUID / SOLID MASTICS is available in following colours: PAGLIERINO (CREAM) BIANCO (WHITE) TRANSPARENT (HONEY) NERO (BLACK) ROSSO VERONO (RED) SEMISOLIDO MASTIC Mastic semisolid coloured It is used to fill big holes. We suggest the usage on travertine marble and similar stones. The glue is smooth and easy to apply by hand. The hard product is well dry, polishable and grindable in a very short time. The reactivity is very good in cold condition too. The product has low shrinkage, good adhesion in many stones.

Synthetic BOND ABRASIVES are best suited for finishing of marble, stone, and Granite etc. Our products is better than other's best available in the market. These are available in, right from 16 Mesh size to 1500 Mesh size i.e. 1, 2, 3, 4, 5, & 6, These are available in all shapes like Frankfurt, Round, Triangle, Butterfly, Handstone & ficket etc. Naturally we have at disposal of clients wanting products stabilized with synthetic resins, for reasons of longer than one year holding in storage and extreme climatic conditions, this kind of material able to withstand any storage time thus surpassing possible storage time of magnesite products.

Available as Sector l4 cms for use on polishing lines. They are available for coloured granite with good gloss and high life. They ore used for block granite also.

THASSOS MASTIC MASTIC FOR GLUING AND REPAIRING CRYSTALLINE MARBLE Transparent high tixotropic glue with high viscosity very smooth and polish, it is used to glue and repair in vertical white marbles and similar stones like Thassos and Carrara. very easy to stir and spread. The hardened mastic is polishable and has good stability to sun light. T8 Liquid resin extra-clear at low viscosity used for gluing and filling clear-white marble like Carrara and similar stones. It is suggested for filling the Travertines and similar stones to achieve the filled-transparent effect. Very stable to the sun rays. It has a very low shrinkage. Good the reactivity at low temperature. MARBLE SUPER TRANSPARENT Extra-clear knifegrade glue, good thixotropy and very smooth. The product has excellent colour stability and quick curing time. We suggest to use it on rich marbles and stones like (Onixes and Carrara's marble to name a few) when the joints must be invisible. Good colour stability to the ray sun. CRYSTAL Extra-clear liquid glue used to laminate, bond, repair and fill marbles, engineered stones with security and durability. We suggest to use CRYSTAL in rich marbles and stones like onixes and carrara's marble, when the join part must be hidden. The product has excellent colour stability.

SKUDO M is a water and oil proof anti-stain water-based for marble and similar stones. It is suitable for polished surface and for honed, brushed, flamed, rough surface too. Recommended for outdoor and indoor application. The product is completely free of organic solvents. SKUDO M operates on the surface of materials, it stops microporosities so that prevents liquids from penetrating the material but it remains permeable to vapours letting materials breath and keeping their characteristics unchanged.

The product is stain repellent and does not alter the natural colour of the material. Recommended for treating kitchen counters as the product is certified safe for contact with food, according to European standard 90/128 ECC. The product penetrates and sets in the micropores of the material, to give it the oil and water repellent effect without altering the natural breathability of the stone.

To be used after the final polisher with very little water. it gives extra gloss and colour to the marble

This is a product for the protection of polished granite and materials of the silica family. It fills the micropores preventing other liquids from penetrating but letting the material breath so that it maintains its natural properties intact. It does not create any surface film. It does not alter the natural colour of the stone.

This bonding matrix comprises of an oxychloride bond. The hardness of the bond is dependent on the hardness, matrix of the material being polished. The rate of reaction and the heat of reaction are altered to vary the bond strength, as required. Magnesite Bond Abrasives are best for fast leveling of Marble, stone, granite and ceramic surface. In term of quality, we have no competitor for this range of products. We provide the best Magnetite Bond Abrasives for almost all types of surfaces. These are available in, right from 16-mesh size to 1500-mesh size. 16, 24, 36, 46, 60, 80,120, 220, 320, 400, 600, 1000, 1200 and 1500 or alternately 000, 00,0, 0b, 1, 2, 2L, 3,4 & 5. These are available in almost all shapes like Frankfurt, round, triangle, Butterfly, Handstone & Fickert etc.

LUXLINE PLUS is suitable to treat on automatic line the polished surfaces of marble and granite. It increases the brightness, makes the surface more clean and enhances the colours. The product has a very good stability due to the high level of penetration on the stone. It is possible to apply the product by automatic waxing line. The wax makes a film very easy to be removed by automatic waxing heads. The effect of anti stain will be achieved after 24 hours from the treatment. In case of floor application, do not walk on the surface before.

Yes, the LUX - Final Polisher for Granite is manufactured by Shanti Abrasive. It eliminates polishing with felts and powders and which is high risk polluting material. The systematic control of the stability of the raw materials and exclusive production process, guarantees its excellent performance. Shanti produces LUX in various shapes, it can be used on highly advanced conveying machine, as well as on the simple manually operated machine and guarantees a perfect mirror-like polish on granite. These are available in almost all shapes like Fickert, Frankfurt & round etc.

This is stain resistant treatment recommended to protect polished crystalline marble types such as Carrara, Thassos, Trani, Botticino and materials with a similar chemical structure. Can be used indoors and outdoors, It does not alter the natural colour of the material. The product penetrates and sets in the micropores of the material, to give it the oil and water repellent effect without altering its natural breathability

This is a water-based product used to treat granite. It is completely free of volatile organic solvents. It fills the micropores preventing other liquids from penetrating but letting the material breath so that it maintains its natural properties intact, Glydex has an excellent beading effect and is exceptionally graffiti resistant: the brush does not adhere to the surface and leaves a very weak trace, which can easily be removed also when dry. It does not alter the natural colour of the stone. For correct application wipe a dry cloth over the surface immediately after applying.

The product is used to obtain a wet look, recommended for kitchen counters, bar counters and other surfaces that can come into contact with foods. The product is certified safe for contact with food, according to European standard 90/128 ECC. The product penetrates and sets in the micropores of the material, producing a permanent wet effect, as well as making the material oil and water repellent. It is generally used on rough surfaces obtained by sand-blasting, smoothing or natural splitting

Yes, the 5-Extra, Final Polisher for Marble is manufactured by Shanti Abrasives with the international technology. 5 extra polishing abrasive for mable - this product, based on very concentrated oxides and polishing components, is used as final rub, that is, it gives a mirror-polishing for every surface. The application of pre-polishing abrasives together with 5-extra guarantees a perfect polishing of every marble surface, without any scratch. Yash's 5-Extra is known to be superior and is unbeatable for mirror-like polishing of of slabs, tiles and all others parts for floor and linings. The special formulae 5-EXTRA and exclusive manufacturing system guarantee its consistency in all operating conditions. 5-EXTRA is unalterable if kept in non-humid environment. It is used after no. 6. These are available in almost all shapes like Frankfurt, round, triangle, Butterfly etc.