Aquazona Exports Darya Ganj, Delhi

Built-in overflow for lateral glass boreholes, ø43 to 45 mm (1.7 to 1.8 in.), on the rear or lateral wall of the aquarium, with surface and bottom suction up to about 1,500 l/h (400 US gal./h). Water outlet ø40 mm (1.6 in.). For easy installation and quiet operation, we recommend the use of overflow hose set 1075/2

Pump capacity: 150 - 300 l/h (40 - 80 US gal./h) Energy consumption: 5 W Pressure height: 0.7 m (27.5 in.) Outlet pipe: L 16 mm (0.6 in.), ø13/10.5 mm (0.5/0.4 in.) Voltage / frequency: 230V/50Hz (115V/60Hz) Cable length: 2 m (78.7 in.) Dimensions without outlet and suction cups: 44 x 43 x 42 mm (1.7 x 1.6 x 1.5 in.)

For pond clarifiers. Destroys suspended algae. Crystal clear pond water – throughout the year. WARNING: Dangerous ultra-violet radiation Radiation of this lamp is harmful to eyes and skin. Installations with this lamp should be screened off completely.

The DOC Skimmers 9415, 9430 and 9460 combine very compact design with high performance and are ideal for installation in aquarium cabinets. They feature TUNZE® Hydrofoamers 9420.040, 9430.040 or 9460.040 which ensure proper foam production and water circulation at the same time. Delivery form: Ready to mount; with accessories.

New from Arcadia a high quality alternative to frozen fish food, fish food in a tin! Suitable for all aquarium fish, the tins are provided with a fork to help remove the food and a re-sealable lid for easy storage once opened. Use entire contents within 4 weeks of opening. Densely packed, perfectly preserved fish food Fortified with calcium, minerals and vitamins for improved growth High pressure heat steam sterilisation ensure food is free from fungus, bacteria and parasites Available in four varieties: Arctic Shrimp, Brine Shrimp, Superior Bloodworm, Premium Cyclops

consisting of four pipes, ø25 mm (1 in.) x 1 m (39.3 in.) and three sleeves, ø25 mm (1 in.), seven 90° angles, connecting hose and clamps. Instructions for use

Recommended for use with T5 high output lamps due to higher heat and UV exposure. Supplied in packs of two, complete with nut and bolt fasteners Non-toxic and corrosion resistant

Comes complete with a pair of nylon nut and bolt fasteners Supplied in packs of 2

for DOC Skimmer 9004, with appropriate hose connection and 2m (78.7in.) silicone hose. Provides the accumulation of significantly larger quantities of foam, e.g. in a bucket, cup or directly into the drain. For aquariums during holiday/vacation, for professional systems, larger aquariums, etc.

for outlet 1077, consisting of screw connection 40/50 mm (1.6/2 in.), 1 ¾" glass borehole in the bottom, approx. ø55 mm (2.1 in.), and upright stand pipe ø40 mm (1.57 in.) x 1 m (39.3 in.). A stainless steel clamp with outlet hose ø40 mm (1.57 in.) x 1 m (39.3 in.) is supplied. Delivery without mounting instructions; to be mounted by experienced expert only.

100-200 liters / day (26-53 USgal.) at 3-6 bar (40-85 PSI) and 15-25°C (59-77°F). TUNZE® RO Station 8550 is a high-quality reverse osmosis unit used to produce pure water. In aquarism it is especially suitable for marine and fresh-water aquariums. RO Station 8550 consists of a 5 µm sediment filter, a 1 µm carbon sediment filter, and a TFC membrane (polysulfone compound). The average retention rate is 98%, the share of pure water amounts to 20 - 25% of the processed water.

This additional filter can be fitted to the outgoing water outlet of the RO Station and serves as water hardener or silicate filter. The cylinder includes two screw caps with plug-type connectors for the hose of the osmosis plant and two brackets for a direct attachment on the RO Station. We recommend to use it as silicate filter at the water outlet to remove silicic acid for avoiding the growth of brown and slime algae in the aquarium. The 8550.501 mixed-bed ion exchange resin with colour change is used as a refill medium. Alternatively, it can be filled with Calcium Carbonate 0880.901 to rise the calcium amount of the RO outgoing waterfor saturation with high amounts of calcium hydrogene carbonate. Thus carbon hardness will be augmented.

When a fluorescent tube is ignited, light is given off evenly in every direction, much of which is directed upwards into the lid of the aquarium. If a reflector is mounted behind the tube, this stray light is not wasted, but redirected back to where it is required – the aquarium, so that the efficiency of the tube is maximised. Reflector can be angled to direct the light into the aquarium or terrarium Made from a sturdy aluminium design Available in all lengths from 8W to the 58W Optimised reflector models for T8 (1”) and T5 (5/8”) lamps Fluorescent lamps are cylindrical in design, this means that light is produced all around the tube and down the length of the lamp. By using the correct reflector, you effectively capture all of the light that is produced from the top and the sides of the lamp. This could be as much as two-thirds of its total output. This light will otherwise be effectively wasted to reflection around the aquarium.

Comline® DOC Skimmer 9012: Designed for mixed aquariums or soft coral aquariums with 200 to 1,200 liters (52 to 317 USgal.), or for sensitive reef habitats with hard corals with up to 500 liters (132 USgal.). It utilizes the TUNZE® "Flash Skimming" principle which performs a rapid protein extraction from the aquarium water, thus avoiding long internal dwell times for the water. The unit offers a combination of water inlet for the protein-loaded aquarium surface, and a fine air-bubble generator with a dispersant, both of them deliver an extreme skimming capacity. Immersion depth: approx. 255 to 285 mm (10 to 11"), skimmer cup volume: 0.7 liters (0.2 USgal.), approx. 400 l/h (105 USgal./h), 13 W, 230V/50Hz (115V/60Hz), dimensions with Magnet Holder (L x W x H): 140 x 110 x 415 mm (5.5 x 4.3 x 16.3 in.). Comline® Multifilter 3168: Mechanical cartridge quick filter for aquariums from 200 to 500 liters (53 to 132 USgal.), with a surface suction device to remove the surface film, a bottom suction device for coarse particles and for the removal of sediments. Immersion depth: approx. 270 mm (10.6 in.) to 290 mm (11.4 in.) in the aquarium and min. 250 mm (9.8 in.) in cabinet systems, variable pump capacity from 500 to 2,100 l/h (132 to 555 USgal./h), 10 - 18 W, 230V/50 Hz (115V/60 Hz), dimensions with Magnet Holder (L x W x H): 140 x 110 x 300 mm (5.5 x 4.3 x 11.8 in.). Osmolator® 3155: The water level in the aquarium and the water parameters are maintained very consistently through the water level control, provided by the TUNZE® Osmolator® 3155 which is attached directly to the filter housing.

The Redox Controller is a compilation consisting of the SmartController 7000 and the following accessories: - 7070.120 Controlled Power Socket - 7055.100 mV electrode made of glass - 7070.300 pH / mV electrode holder - 7075.150 Redox Test Solution +475 mV, 50 ml (1.67 oz.) Each in a separate package. Only adjustable via Wifi.

Flow rate: 1,100 to 3,000 l/h (290 to 790 US gal./h) with Turbelle® Controller Hmax: 3.9 m (153.5 in.) ¾" NPT hose connection Energy consumption: 10 - 43 W Voltage / frequency: 100 - 240 V / 50 - 60 Hz Cable length: 3 m (118.1 in.) Dimensions without outlet and suction cups: 118 x 94 x 75 mm (4.6 x 3.7 x 2.9 in.)

Pump output: 150 to 800 l/h (40 to 210 US gal./h) Energy consumption: 3 to 8 W Pumping head: 1.25 m (49.2 in.) ½" NPT hose connection Voltage / frequency: 230V / 50Hz (115 V / 60Hz) Cable length: 2,2 m (86.6 in.) Dimensions without outlet and suction cups: 87 x 67 x 48 mm (3.4 x 2.63 x 1.88 in.) Instructions for use

Precision device with fine adjustment for standard CO2 cylinders, thread in keeping with German standard DIN 477 (US version with CGA 320 thread). To be mounted without tools; precise adjustment; two pressure gauges; pressure-relief valve. Made in Germany. Instructions for use

• Compact day-night timer • 15 minute interval setting • For appliances up to 3KW (Max 13A)

to connect TUNZE filters with Turbelle® pumps, inside ø25 mm (.98 in.), outside ø27 mm (1.06 in.), length 30 cm (11.81 in.).

Specially designed key lock head for easy removal. Designed to easily handle 250ml of Bio-Phos 80. Made from class A acrylic & ABS materials. Highly efficient, durable & reliable.

Overflow for supplementary installation with surface and bottom suction up to about 1,200l/h (320 USgal./h). No boreholes in the glass required, and thus it can be retro-fitted easily. Even after an interruption of the recirculation pump, it will restart the siphon automatically. With additional U pipe 1001.74 (cf. Turbelle® filter accessories), a throughput of 1,500l/h (400USgal./h) is possible. Water outlet ø40mm (1.6in.). For easy installation and quiet operation, we recommend the use of overflow hose set 1075/2. Instructions for use

Mechanical precleaner filter for all cabinet filter tanks, placed directly next to the drain hose of TUNZE® outlet, with removable post-filter with 300 µm (11.8 mil) nylon mesh.

For small aquariums, a stable osmotic balance is important, because they are particularly sensitive to constantly changing salt concentrations. The Osmolator® nano which was specifically designed for this, is a water level controller with only a single sensor and is equipped with a processor-based controller that protects against overfilling. It is suitable for nano aquariums or small aquariums up to 200 liters (55 USgal.).