Arya communications & electronics servic Mohan Garden, Delhi

Special mounting hardware is supplied with yagi antenna to mount either Horizontal or Vertical polarization. Radiating elements, supporting booms and adjoining metal castings of Yagi antenna have been constructed in high quality aluminium alloys to prevent corrosion. The VHF yagi antennas: comes with elements removed from the antenna boom for ease of packing and transportation. The UHF Yagi Antennas: comes with pre-assembled and permanently fixed elements in to the support boom.

  Antenna Experts manufacture yagi antenna for 75MHz, 150MHz, 350MHz, 450MHz, 550MHz, 650MHz, 700MHz, Lower 700MHz band, 850MHz, 1450MHz, 1850MHz and 2450MHz frequency bands. Our VHF Yagi antenna, UHF Yagi Antenna and Microwave Yagi Antenna design reflects innovative modern antenna construction. The mounting hardware of VHF UHF Yagi antenna is made of type 316 marine grade stainless steel. Antenna Experts also manufactures yagi with reflector for digital TV gap-filler application for 470-860 MHz frequency band.

  A whip antenna is an antenna consisting of a single straight flexible wire or rod. The bottom end of the whip is connected to the radio receiver or transmitter.

  These Panel Antennas operate in unlicensed bands 2.4 GHz. and 5.8 GHz.

  Omni Directional Collinear Antenna have been constructed in high quality aluminium alloys to prevent corrosion. Aluminium is very light weight metal and it makes omni directional exposed folded dipole antenna.

Omni directional exposed folded Dipole antenna have been constructed in high quality aluminium alloys to prevent corrosion. Aluminium is very light weight metal and it makes omni directional exposed folded dipole antenna. The Omni directional exposed folded Dipole antennas are supplied with dipole removed from the central support pipe to make packing and transportation easy and handy. The Dipole Holding Brackets of omni directional exposed folded dipole antenna are fitted tightly on the central support pipe for quick and error free installation.

The HF Broadband Two Element Folded Dipole Antenna provides optimum performance over complete HF band, eliminating the requirement of multiple antennae or an Antenna Tuning Unit, (ATU)..It can be mounted for Horizontal polarization in a standard dipole configuration using two masts of 50 feet each. Total space required for installing the HF Broadband Dipole Antenna in the Horizontal polarization is 30 x 10 Meters.

C Communication Electronic manufacture grid parabolic antenna for 350 MHz, 450MHz, 800MHz, 900MHz, 1450MHz, 1850MHz, 2450MHz and 3500MHz frequency bands. Various size of grid parabolic antennas manufactured by us such as 0.6Meter (60 Cms), 0.9M (90 Cms), 1.2 Meters, 1.8 Meters, 2.4 Meters, 3 Meters and 4 Meters size with various gain starting from 15 dBi to 44 dBi depending on the frequency range. Grid parabolic antennas greater than 2.4 Meters supplied with 2 side struts for highest wind load / pressure and in two segments for easy of shipping and handling.

C Communication Electronic manufacture dual stacked yagi for 75MHz, 150MHz, 350 MHz, 450MHz, 550MHz, 650MHz, 700MHz, 850MHz, 950MHz, GPS L1 band, GPS L2 band, 1450MHz, 1850MHz, 2100MHz and 2450MHz frequency bands. Our VHF Dual Stacked Yagi antenna, UHF Dual Stacked Yagi Antenna and Microwave Dual Stacked Yagi Antenna design reflects innovative modern antenna construction.   The Dual Stacked Yagi antennas are designed for rear mounting and are supplied with stacking pipe. These Dual stacked antennas are designed to stacked and fed in phase with supplied matching phasing harness cable for increased gain to 3 dBi. The dual stacked yagi antenna can be stacked either in horizontally or in vertically to control the beam-width in desired plane.

C Communication Electronic manufacture satellite tracking antenna for 150 MHz, 350MHz, 400 MHz, and 450 MHz. frequency bands. Satellite tracking antenna for other customized frequency band can also be supplied on request. The CY series VHF/UHF rugged, all weather Crossed Elements, Yagi Antenna is designed for Circular Polarization. Special mounting hardware is fixed at the centre of gravity of the yagi antenna for mounting on a round pipe supplied with the circular yagi antenna. The Circular Yagi antenna can be configured to work as RHCP or LHCP field selectable by inter-changing the 90 Degrees delay harness cable.

The CY series VHFUHF rugged, all weather Crossed Elements, Yagi Antenna is designed for Circular Polarization. Special mounting hardware is fixed at the centre of gravity of the yagi antenna for mounting on a round pipe supplied with the circular yagi antenna. The Circular Yagi antenna can be configured to work as RHCP or LHCP field selectable by inter-changing the 90 Degrees delay harness cable.

This rugged, Crossed Quad-Stacked Yagi Array for Circular Polarization consist of FOUR Yagi Antennas with crossed elements. The array of quad-stacked crossed elements four yagi antennas consists of two columns of two horizontally stacked yagis.  The Quad Array uses fixed mounting blocks on the booms of the array and all the elements and the antenna feed systems have screw threads at the ends for fixing the elements on the boom. This design makes the field assembly and the transit of the array an easy job.   The yagi antennas when packed comes with elements removed from the antenna boom for ease of packing and transportation. It can be assembled at site with the use of simple hand tools.

This rugged, all weather Crossed Elements, Yagi Antenna is designed for Circular Polarization.Special mounting hardware is fixed at the centre of the yagi antenna for mounting on a round pipe of 1-1/2 inch O.D. The yagi antenna when packed, comes with elements removed from the antenna boom for ease of packing and transportation. It can be assembled at site with use of simple hand tools. The mounting hardware supplied is of Stainless Steel.

  These Cell Phone and Jammer Single Band Antennas have high gains of 9 & 10 dBi. and are highly suitable for use for cell phone bands as mobile phone signal booster, repeater and as JAMMER ANTENNAS.

  Omni directional antennae are used for example as indoor antennae. They are multiband capable and preferably radiate with a vertical polarisation orientation. For this purpose, they may comprise a ground or earth plate, which may for example be formed in a disc shape, on which a monopole radiator rises transverse and in particular perpendicular to the earth plate. The entire arrangement is generally covered by a protective housing, that is to say an antenna cover (radome).