Hospital Autoclave & Sterilizers Dealers in Raja Garden, Delhi (46 products available)

Table Top Steam Sterilizer (Pre & Post Vacuum Facility)   “NSW” pleased to introduce table top steam sterilizer for today’s growing demand for more sophisticated sterilization technologies. Any private or dental clinic can enjoy the benefit of this technology right in their office. Outpatient clinics, which have increased significantly in recent years, perform highly skilled invasive surgery on their own premises. They rely on advanced sterilization technology. In addition, the increasing tendency towards modular space design in the clinic makes our pre & post vacuum tabletop autoclaves the perfect solution. Construction: This autoclave is made of complete stainless steel 304 Qlty having outer & inner wall & has capacity of 22 liters chamber has compact outer dimensions making it a perfect fit for today’s contemporary clinic. There is mineral wool insulation between the two walls .Designed to sterilize class B cycles. A common application is in the medical or (operating room) as an independent sterilization unit or in dental and private clinics that need to sterilize narrow and hollow instruments and wrapped packs. It has 2 nos. perforated shelves. The water reservoir has capacity of 6 liters of distilled or low quality deionized water. This sterilizer are designed to perform class B cycle that meet the strictest EN 13060 European standards.  Pre Vacuum Air Removal: Porous and packed load types as well as fabrics have one thing in common: Air is trapped inside these instruments and fabrics, resulting in air pockets that prevent the full penetration of steam. It is known that spores and bacteria can survive at 134 Deg.C in air pockets.  Therefore, pre vacuum air removal eliminates air pockets from all load types and maximizes steam penetration to instrument components. Post Vacuum Drying: When hot steam comes in contact with the cooler instruments, condensation can form. Condensation becomes even more serious with packaged loads, when moisture can remain after the cycle ends. A moist load does not provide sufficient SAL (Sterility Assurance Level). Post vacuum drying provides complete drying of porous loads and hollow instruments at the end of the sterilization process. Temperature Control: Temperature shall be controlled by Microprocessed PID Controller which will have following features: Auto purging: Set Temp. Purging Stop: - Set Temp. Auto Exhaust:- Cool Elapse Time Set Temperature:- Could be set Facility for temp. control Auto cycle stop Buzzer at cycle over Operating Temp. 121 Deg.C to 135 Deg.C Sterilizing Pressure 1.2 to 2.3 kg /Cm2 Pressure can be achieved upto 760mm/ hg approx. This sterilizer work on 200/ 220 volts A.C 50 Hz. Option:PC connection port for direct PC access enables direct software updates and remote maintenance or data can be collected through USB port.  

Brand : Simro

Material : Stainless Steel

Usage/Application : Water

Outer Diameter : 11.mm

Material Grade : SS 304

Stern quality checks, frequent examinations and perfect packaging, we make certain that the range is as per the industrial standards. For the convenience of the clients, we have adopted safe and secure payment gateway that helps us in the attainment of complete client satisfaction and maintaining transparency in dealings. Features:         Excellent Resiliency Quality-Tested Long Service Life

We are a high-flying name in this arena and thus, strive hard to deliver the best in class products to the clients. Also, we source the basic material from the reliable places. We have divided our infrastructure into different units including packaging unit wherein we pack our offerings meticulously to circumvent loss during transit.

Screwed BSPP Female, PTFE Seat, Test Lever   Specifications Pressure : Up to 12 Bar Temperature : Up to 180°

Product : Industrial Autoclave

industrial   autoclave

Type : Autoclave Sterilizer

Certification : CE Certified, ISI Certified, ISO 9001:2008

Voltage : 110V, 220V, 240V, 380V

Application : Laboratory Use, Medical USe

Capacity : 0-100ltr, 100-200ltr, 200-300lrt, 300-400ltr, 400-500ltr

Frequency : 50Hz, 60Hz

Power : 1kw, 2kw, 3kw, 4kw, 5kw

Feature : Durable, Easy To Operate, High Performance, Kill Bacteria, Rust Resistant, Spores And Germs

Warranty : 1yrs

Automation Grade : Fully Automatic, Semi Automatic

To meet the varied requirements of our prestigious clients, we are engaged in offering a wide range of Lot Safety Relief Valve. The valves offered by us are basically used for a wide range of applications in different industries. To manufacture of these products, our talented team of professionals uses only premium grade raw material and modern techniques in accordance with predefined international quality standards. In addition to this, our offered valves are available in varied dimensions and sizes as per demanded specification from our clients. Features: Easy maintenance Seamless finish Accurate dimension

We are offering Cement Autoclave. AUTOCLAVE FOR TILES Laboratory TILE AUTOCLAVE: Pressure up to 21 kgcm is 4031 Autoclave is suitable for conducting accelerated soundless tests on cement. It consists of a stainless steel Cylinder with a welded heated insulation. Mounted on a sturdy supporting frame and enclosed in a heat insulated metal housing which is attractively finished paint The control unit is attached to the side of the housing enclosing a sensitive pressure regulator and pressure gauge, power switch and pilot lights for controlling the electric heating unit. Inside working chamber 14 “ X 18” APPROX. Suitable for operation on 220 V, single phase AC Supplied complete with Test Bar Holder rack to hold 5 TILES OF 200 MM X 150 MM PROVIDED with one stand where tiles are placed separately. Inside chamber is made of stainless steel but lid of the AUTOCLAVE IS MILD STEEL DULY CHOROME PLATED. Since for tile test temp is required 168 but we will provide the test upto 200 degree as per your choice. With digital temperature controller and automatic pressure control switch manual type.

Features : SS 304 construction, Fully automatic, Inbuilt Steam generation, PID controller, Automatic Purging, SS 316 Jacket, Triple Walled Construction, Radial Locking, Door interlocking

Size (W x H x D) : 300x300x300mm (12"x12"x12")

Temperature Thermostatically controlled by hydraulic thermostat from 50ºC to 250ºC with a sensitivity of +- 1ºC in Bare Oven. Beaded heating elements are placed in ribs at the bottom and sides. Built in L-shape thermometer. Double walled, inside made of Aluminium or Stainless Steel & outside mild steel sheet painted with attractive stove enamel with adjustable wire mesh nickel plated trays, onoff Rocker switch with Indicator & Thermostat Indicator, to work on 220230 Volts A.C.

It is used for sterilization under saturated steam pressure at any selected point between 5 to 20p.thermoindia� (optional adjustable with pressure control switch). These are double walled unit with inner chamber (boiler) made of 18 s.w.g. Stainless steel & outer chamber is covered with m.s. Lid with s.s. linging is tightened by radial locking system. (optional outer body made by stainless steel) fitted with neoprene rubber gasket, all system are hydraulic tested upto 40 p.thermoindia� as a safety measure. all autoclave are fitted with standard accessories such as water level indicator, pressure gauge, steam release cock, spring loaded safety valve & heating elements. Supplied completed with s.s. Basket, cord & plug to work on 220230 volts a.c. Supply. All deluxe model beside fitting with s.s. Lid & having inner chamber made of s.s. & outer chamber made s.s., are also fitted with vacuum beaker as a safety device. s.no. dia x height ltrs. load a. 250 x 450mm (10`` x 18``) 22 1.5 kw b. 300 x 500mm (12`` x 20``) 40 2.0 kw c. 350 x 550mm (14`` x 22``) 50 3.0 kw d. 450 x 600mm (18`` x 24``) 98 4.0 kw e. 550 x 750mm (22`` x 30``) 152 5.0 kw optional accessories: � automatic pressure control switch (automatic indfoss piezostat) � automatic low water level cut-off device � automatic 0-60 minute �german� timer � complete automatic purgin timer temp. System

Country of Origin : India

Color : Black, Creamy, Grey, White

Voltage : 110V, 220V

Condition : New, Used

Operating Mode : Manual

Warranty : 1year

Usage : Industrial Use

Weight : 0-5kg

It is a unique vessel that generates steam under pressure & temperature ranging between 120 0C to 135 0C. It is used to sterlize surgical intruments dressing materials, lenen, Rubber, Plastic materials injection Liquids by means of steam under pressure of 15-20psi(Adjustable).It has double safety valves.One spring loaded and second dead weight for additional safety.Complete with pressure gauge steam release valve,water outlet valve tripod stand. Available in following size. 1.12" x 12" Stainless steel jointed/jointless body Electric /Non elecric. 2. 12" x 12" Aluminium jointless body electric /Non elecric. 3. 12" x 15" Aluminium jointless body electric /Non elecric. 4. 20" x 12" Stainless steel jointed body electric /Non elecric.

SS Seamless die pressed deep drawn chamber μp based PID controller with dual display for Temp. & Time Fully SS construction Dual safety valves Microprocessor Digital temperature controller cum timer Over heat auto shut down at 135°C Dual Display Unique shape heater of outer SS tubing Food grade silicon rubber gasket for better durability Specially designed heater for optimum chamber usage Calibrated temperature-cum-pressure gauge Colour coded monitoring gauge SS Safety valve Vacuum breaker to remove air pockets in the chamber

Voltage : 110-220 v

Material : Stainless Steel

Power Source : Electric

Application : Hospital

Aluminum deep drawn Seamless Construction • Sturdy, Safe, Rust proof, Portable • For high pressure steam sterilization of medical materials such as dressings and surgical instruments. • Max Pressure 15 psi1.5 bar, Max temp 121 C • Equipped with steam release control valve and high quality heat resistant Bakelite handles • Lid Sealing by high pressure rubber gasket • Pressure Gauge with color coding to display sterilization 2 2 zones, graduated in kgcm and lbinch • Equipped with Safety Pressure release weight valve • Electric , 220v50Hz,single phase

A well known Manufacturer & Exporter of Automatic Autoclave & Autoclave. Our product range also comprises of Industrial Oven, Tray Dryer and Conveyorised Oven.

This chemical indicator tape has stripes that change color after exposure to steam sterilization conditions to provide immediate identification of processed items.

We bring forth the finest quality Nozzles in the market. The Water Spray Nozzles made available by us are fabricated by high quality brass and SS 304. Our Brass Water Spray Nozzles offers durable and hassle free performance for a longer period of time. Nozzles are used for creating pressure for the effective spraying of oil and water. The spray angle of these nozzles is of approximately 80° to make more effective.