B.P. INDUSTRIES Shakti Nagar, Delhi

Water still mounting type:   This unit is recommended for making pyrogen free water of a very High degree of purity. This still is fitted with ISI mark Kettle Element with ejection device. The complete unit is made of stainless steel except tap, to work on 220/230 Volts A.C.          

Water Bath Rectangular Double Wall: without thermometer     Double walled, inside made of stain less steel 304 grade and out side mild steel painted with attractive stove enamel. Temperature is controlled by a hydraulic thermostat from 5°C above ambient to 100°C with sensitivity of ± 0.5°C fitted with ISI mark Tublar Element. Bath consists of 2 pilot lamps & on/off switch, to work on 220/230 Volts A.C.  

  Soxhlet Extraction unit mantle type :Without Glass parts & Clamps     Ideal heater for the extractors of Soxhlet and other types. This apparatus is suitable of heat soxhlet flasks of 50-500 ml. It consists of mild steel sheet housing, two vertical & two horizontal rods with gutkas and screws to hold the flasks. To work on 220/230 Volts A.C.           No.     A. Unit of 3 - Test Mantle type with 3 energy regulators B. Unit of 6 - Test Mantle type with 6 energy regulators

Rectangular Muffle Furnace: Maximum Temp. 950°C working temp.900°C.     Light weight with ceramic fibre wool insulation. The outer casing is made of double walled thick P.C.R.C. sheet painted with attractive stove enamel. Heating elements are made of KANTHAL wire backed by cerawool insulation. A viewing cap is also provided on the door. Temperature control unit consists of Energy regulator & Digital Indicator with silver thermalfuse or with PID Micro Processor controller dual display with safety alarm to work on 220/230 volts AC with an accuracy of ± 3°C or Better.     Optional Accessories:   1. Digital timer of 99.59 Hours can also be Provided at an extra cost 2. With Direct Printer Port Cable

Melting Point Apparatus :Without thermometer & Capilaries   Electrically heated for determination of single or mixed melting point up to 350°C having low, high provision with energy regulator to work as 230 volts AC 

B.O.D. Incubator Eco-Friendly : Low Temperature Incubator   Perfect System Double walled, inner chamber made of Stainless Steel sheet 304 grade &outer mild steel stoving painted. Specially designed wire mesh shelves made of SS 304 grade. Gap between the walls is filled with puf insulation. Two Air Circulation Fans are provided for uniformity of temp in working space. Refrigeration system with CFC. free compressor & R 134 a eco-friendly refrigerant is used, Temperature 5°C to 50°C with controlling accuracy of ± 0.5°C is controlled with Dual Display PID Micro Processor controller dual display with safety alarm Built in automatic voltage stabilizer & inside full view Acrylic Door is also provided. To work on 220/230 volts AC. Tracibility calibration certificate of control is also provided.        Optional Accessories:   1. Internal Illumination is provided with 3 nos. flourescent tubes of 60 c.m. length with 3 on/off separates switches : But in case of 4 cubic feet only 300 mm Length Tubes are provided at an extra cost 2. Automatic cyclic timer 0 to 24 hours regulating illumination cycles for at an extra cost3. Above said B.O.D Incubator can be fitted with Direct Printer Port Cable with an extra cost 

Loss on Heating /Thin Film Oven     Purpose for modified Bitumen testing. various tests like Loss of Weight, Softening Point, Penetration, Elastic recovery Test etc. are to be done on the residue of thin Film Oven test. Thin Film Oven can conduct “Thin Film Oven Test” (IS : 9382-1982) as well as “Loss in weight of bitumen & Flux-Oils” (IS: 1212-1978, BS: 2000 (P-45), ASTM-D6, D 1754, AASHQ - T47, T 179)A double walled oven 230 V., 50 Hz and 1 Phase, inside Chamber 400 mm x 400 mm x 400 mm of Stainless Steel 304 & outside mild Steel Stoving Painted, in between the walls proper insulation; with a glass view window. Temperature range from ambient plus 10°C to 200°C & working temperature 163°C ± 1°C, controlled by PID Micro Processor controller dual display with safety alarm.Rotating Shelf for Loss on Heating Test: A detachable perforated metal shelf of approx 250 mm dia (having provision to keep 9 no sample containers of 55 mm ID x 35 mm internal depth with flat bottom ) Suspended inside the oven which is rotated by a vertical shaft to which reduction gear is fitted from outside at a rate of 5 to 6 RPM.For Thin Film Test: Another detachable perforated metal shelf of approx 340 mm Dia (with provision to keep four Aluminium dishes with 140 mm 1D x 10 mm depth with Flat Bottom) provided that can be fitted in place of 250 mm dia shelf for Thin Film Test.Ventilation of the oven by means one round hole near the top & near the bottom on each of the two sides is provided.

This heating plate is very useful to Continuous heating upto 500°C. Cast iron plate machined to a smooth & leveled surface is fitted on a robust mild steel perforated body painted with attractive stove enamel. The top of  the plate is of 20.5 cm dia. The rating of the plate is 1.5 Kw. Fitted with Energy Regulator or with PID Controller dual display with safety alarm. To work on 230 Volts AC,50Hz single phase supply.  

Laboratory Rectangular Heating  Plate With  Cast Iron Top.     This heating plate is very useful for continuous heating upto 350°C.Cast iron plate machined to a smooth & leveled surface is fitted on a robust mild steel double body painted with an attractive stoving enamel . Top of rectangular cast iron plate has insulated beaded elements inside. Provided with Energy Regulator or Thermostat (upto 300°C ) or PID Micro Processor controller dual display with safety alarm.  To work on 230 Volts AC,50 Hz single phase supply.

Laboratory Incubator with Perfect System:   In this system there is one path of circulating Hot Air in between the inner chamber and insulation. Forced Air Moved by the motorised blower is called PERFECT SYSTEM . It results minimum temperature variation at any point in working space. Temperature controlled by PID Micro Processor controller dual display with safety alarm from 5°C above ambient to 70°C with a sensitivity of ± 0.1°C in Bare Incubator. Working chamber is made of Stainless steel 304 grade and outside made of mild steel painted with good stoving enamel with adjustable wire mesh nichol plated trays. To work on 220/230 Volts A.C. supply.   Optional Accessories: 1. Digital timer of 99.59 Hours can also be Provided at an extra cost 2. With Direct Printer Port Cable Note:-1. Item should always be placed on shelf & not directly on floor.2. Tracibility Calibration Certificate of Controller is also provided.

  Temperature Thermostatically controlled by hydraulic thermostat 5°C above ambient to 70°C with a sensitivity of ± 0.5°C in Bare Incubator. Beaded heating elements are placed in ribs at the bottom and sides. Double walled, inside Aluminium or Stainless steel & outside mild steel sheet painted with attractive stove enamel. Door has double glass viewing, built in horizontal L-shape glass thermometer with wire mesh nichol plated adjustable trays, Rocker Switch with Indicator & Thermostat Indicator, to work on 220/230 Volts A.C.      Optional Accessories: 1. Air circulating fan can also be provided in each size if required at an extra cost 2. Mechanical timer of 2 hours, can also be provided at an extra cost. 3. Digital Timer of 99.59 Hours can also be provided at an extra cost 4. PID Micro Processor Controller Dual Display with safety alarm with air circulating fan without T.M. & Thermostat can also be provided in each size at an extra cost 5. PID Micro Processor Controller Dual Display with Air Circulating Fan with Direct Printer Port Cable.   Note:-  1. Items should also be placed on the shelf & not directly on floor.2. Tracibility calibration certificate of controller is also provided.

Laboratory Electric Oven Universal type: upto 250°C/300°C     Temperature Thermostatically controlled by hydraulic thermostat from 50°C to 250°C with a sensitivity of ± 1°C in Bare Oven. Beaded heating elements are placed in ribs at the bottom and sides. Built in L-shape thermometer. Double walled, inside made of Aluminium or Stainless steel & outside mild steel sheet painted with attractive stove enamel with adjustable wire mesh nichol plated trays, on/off Rocker switch with Indicator & Thermostat Indicator, to work on 220/230 Volts A.C.     Optional Accessories: 1.Air circulating fan can also be provided in each size if required at an extra cost.2.Mechanical timer of 2 hours, can also be provided at an extra cost.3. Digital Timer of 99.59 Hours can also be provided at an extra cost4. PID Micro Processor Controller Dual Display with safety alarm with air circulating fan without T.M. & Thermostat can also be provided in each size at an extra cost5. PID Micro Processor Controller Dual Display with Air Circulating fan with Direct Printer Port CableNote:-  1 Items should always placed on the shelf & not directly on floor.2 Tracibility Calibration certificate of controller is also provided.

 Laboratory Electric Oven Perfect system upto 250°C/350°C/450°C     In this system there is one path of circulating Hot Air in between the inner chamber and insulation. Forced Air Moved by the motorised blower is called PERFECT SYSTEM . It results minimum temperature variation at any point in working space. Temperature controlled by PID Micro Processor controller dual display with safety alarm from 50°C to 250°C with a Sensitivity of ± 1°C or better in Bare Oven. Working chamber is made of Stainless steel and outside made of mild steel painted with good stoving enamel with adjustable wire mesh nichol plated trays. To work on 220/230 Volts A.C. supply.      Optional Accessories: 1. Digital Timer of 99.59 Hours can also be Provided at an extra cost2. With Direct Printer Port Cable   Note:-    1 Items should always be placed on shelf & not directly on floor.2 Tracibility calibration certificate of controller is also provided.  

High Temperature Furnace of 1200°C:   Light weight with ceramic fibre wool insulation. The outer casing is made of double walled thick P.C.R.C. sheet, painted with attractive stove enamel. Heating Elements are made of KANTHAL “A-1” wire in coil From placed in the ribs of the tiles, backed by cerwool insulation, which avoids loss of energy. A viewing cap is also provided on the door. Temperature controlled by PID Micro Processor controller dual display with safety alarm an accuracy of ± 3°C or better. To work on 220/230Volts or 400/ 440 Volts A.C. 3 phase supply. Maximum Temp.1200°C working temp.1150°C.     Optional Accessories:   1. Digital timer of 99.59 Hours can also be Provided at an extra cost2. With Direct Printer Port Cable 3. Rates for the above said coil elements with tiles on request.

    Suitable for all laboratory application requiring constant temperature to high degree of accuracy ± 0.2°C or better. Temperature is controlled by PID Micro Processor controller dual display with safety alarm from 5°C above ambient to 95°C. Double walled, inside made of stainless steel 304 grade and outside mild steel sheet painted with attractive stove enamel fitted with ISI mark Tublar Elements. A Glass window is fixed on the front side. Supplied complete with stirring arrangement and Goval cover. To work on 220/230 Volts A.C.      

Suitable for Laboratories, Chemicals, Pharmaceuticals, Dyes, Glass Plants etc. Particularly useful for Heating inflam-mable liquids. Electric heating net is hand knitted from glass yarn and there is no joint to maintain the strength of the yarn and stands high temperature up to 350°C.The body of the mantle is duly Stoving Painted. All heating mantles are lagged with special grade mineral wool. Towork on 220/230 Volts A.C. Fitted with Energy Regulator or with PID Micro Processor controller dual display with safety alarm.        The Energy Regulator dial is arbitrarily marked 0-100 position. This marking does not indicate temperature. It indicates control level i.e. at position '100', maximum electric is allowed to flow to Heating Mantle. At position 'O' Minimum electric is allowed to flow to Heating Mantle.    

Serological Water Bath Thermostatic Controlled: without rack and thermometer     Double walled, inside made of stain less steel 304 grade and out side mild sheet painted with attractive stove enamel. Temperature is controlled by a hydraulic thermostat from 5°C above ambient to 100°C with a sensitivity of ± 0.5°C fitted with ISI mark Tublar Element. Bath consists of 2 pilot lamps & on/off switch, to work on 220/230 Volts A.C. Fitted with Thermostat / Thermostat with Stirrer / with PID controller Dual Display with Stirrer.