Bhagwati Hardware & Mill Store Chawri Bazar, Delhi

Made By : Imported Model No. : 1107 Series       PRODUCT FETURES  Introduction   Zahn Cup is designed according to standard of ASTM  D4212, D1084, Zahn Cup. It can be used to measure the viscosity of Newtonian or near Newtonian liquid. Adjustable in anywhere such as the workshop, factory and lab etc. And quickly measure the viscosity of liquids. This flow cup is widely used in link and printing factory..    Technical Specification :   Material             Stainless Steel Volume             44ml  

Made By : Imported Model No. : 1702 Series       PRODUCT FETURES  Wet Film Thickness – Wheel It is manufactured according to BS-ISO-ASTM standards, Precision gauge to check the wet film thickness, made of high grade stainless steel.

Made By : Imported       PRODUCT FETURES Wet Abrasion Scrub Tester □  Indtroduction : This machine is used to test the abrasion, scrub and wash ability performance for Many kinds of materials ; do the abrasion scrub test in wet and dry condition ; touch Screen control. It is widely used in water – based coating field.   □  Application : Paint, coating, leather, wood, plastic, printing materials and fiber etc. □  Features : • Big LCD design, touch – screen operation  • Operating Menu : English • Testing fluid flow is controlled by peristaltic pump   □ Technical Specification : •  Scrub Rate : 37 ± cycles / min • Maximum Setting of Abrasion Times : 9999 • Sample Thickness : 0 – 25 mm • Test Panel Thickness Range : 0 – 25 mm     ( Adjustable )   □ Standards : • ASTM D2486, D3450, D5213 • DIN 53778   □ Order Information : • 1. 2805 Wet Scrub Tester ( Standard Model ) Carriage assembly with pump, Applied weight 500g , 2 brushes with natural bristle   • 2. 2805 / 1 Wet Abrasion Scrub Tester DIN 53778 Carriage assembly with pump, Applied weight 250g, 2 brushes with natural bristle   • 3. 2805 / 2 Wet Abrasion Scrub Tester ASTM D2486 Carriage assembly with pum, Applied load 454 g, 2 Nylon brushers, 2 rubber pads with 12.7X0.25mm Brass shim   • 4. 2805 / 3 Wet Scrub Tester ASTM D3450 Carriage assembly with pump, applied weight 1500g, 2 sponges 

Brand Name : Trusize

Measuring Range : Upto 1000 mm

Material : Stainless Steel

Brand Name : KRIS

Material : Plastic

Display : DIGITAL

Type : Digital

Measuring Range : 0-220mm

Condition : New

Capacity : 0.30

Accuracy : +/- 0.5%

Display : Digital

Automatic Grade : Semi-Automatic

Titanium Type Adjustable Torque Wrench, Tohnichi-Japan   Features :  PQL model made from Titanium material. Weight is 50% lighter compared with the conventional type. Suitable for large bolts and the tightening operation where working conditions are difficult. When torque is set, it can not be changed except by using a hex key. Worker can not easily change torque setting. Suitable for single purpose bolt tightening as preset type with graduation. A click will signal that the proper amount of torque has been applied. The ratchet head features 24 teeth accurately ground to provide durability and creates movement at 15 degree intervals which allows for gear ease of tightening in confined spaces. Easy torque setting by graduation. With rubber grip for 180N, 360N.  

Made By : Mitutoyo Made In : Japan Model No. : Series 547 SERIES 547, 7   Thickness Gages offer a quick and efficient mean of inspection with their convenient grip handle, thumb trigger and spring-loaded spindle. The various models cover a wide range of applications.   FEATURES • Wide range of applications with various types of measuring faces ( on the spindle and anvil ).   • The digital models incorporate Mitutoyo’s popular ID-C and ID-S Series Digimatic     Indicators to provide error-free LCD readings as well as data output for SPC analysis.   • 547-401 ( 547-400S) is ideally suited for measuring thickness of paper, film, wire, sheet     metal and similar materials.  

Material : Steel

Feature : High Quality, High Tensile, Non Breakable

Made By : Peacock Made In : Japan Model No. : CC Series       PRODUCT FETURES CC Series Peacock offers a complete line of Bore Gauges with interchangeable anvils and necessary accessories to perform close tolerance measurements of holes, taper and roundness. 1 Dial gauge mounting knob is very simple of and sure avoiding demerit of collet – system. 2 The Contact point is tungsten carbide ball. 3 The standard ball tipped at the replacement rod is made of steel. The sintered hard-alloy ball is also available to tip. 4 Wide range accuracy………………5 µ m or less Adjacent error……………………….2 µ m or less Repeated accuracy…………………2 µ m or less 5 Effective measuring range is 0.5 mm ( CC – 02 CC – 01) 6 Effective measuring range is 1.2 mm ( CC -1 to CC- 6 )

Made By : Tohnichi Japan Made In : Japan Model No. : RTD Series   Features :  Ratcheting mechanism prevents over torque. Torque value easily set with external scale. Rotary slip clutch mechanism. Preventing over-torque by "slipping" when more force is applied beyond set torque. Toggle clutch type torque detection mechanism ensures accuracy and long durability. Easy torque adjustment. Locking mechanism prevents the change of torque while in use.  Applicable to use in the EU region. Comply with calibration procedures of ISO6789 Type II Class D.

Made By : Imported       PRODUCT FETURES  ● Automatic Scratch Tester For product surface coating, such as coil coating, can ink, 3C ink and automobile Surface coating etc. It is necessary to test its scratch resistance performance. Enable to measure with the 2801 Atomatic Scratch Tester.   ●  Introduction : Scratch Tester is applied to the scratch resistance performance evaluation of Single coating or complex coating system in insulated color coated sheet. It will be known the Coating scratch resistance performance by evaluating whether the coating is scratched by Evaluating whether the coating is scratched by tungsten carbide hemispherical stylus with a certain weight or the maximum load of the coating which can not be scratched. The Scratch Tester of is complied with the standards of ISO1518, BS3900, ASTM D5178 and ASTM D2197. Enable to display the graph of scratch on the screen in real time and show the test result on the screen, it will directly display “OK” or “NG”   ● Features •  Big LCD design, touch – screen operation •  Operating Menu  :     English •  Adjustable work platform --- More convenient • Display the test result on the conductive substrate • High Hardness Scriber ---More durable • Special design for sample clamp --- Equipped with ruler • Show the testing procedure with real time graph   ● Technical Specification ;   Scratch Speed : 30 – 40 mm/ sec Moving Distance :  65 mm Power : 220  v / 50 Hz or 110 v / 60 Hz

Brand Name : BLUESTEEL

Display Type : DIAL

Hardness Scale : 0 TO 100 SHORE

made by : trusize made in : indian model no. : shore-a       product fetures  rubber hardness tester (durometer) shore-a & d, type 06 trusize manufactures a wide variety of durometers (rubber hardness tester) for checking hardness of polymers, composites, synthetic rubber products, acrylics, acetates, polymers, thermoplastics, pvc, hardboards, wood, fruits and many other non standard materials. dual needle helps to take the reading after removing from the work piece. Rubber hardness confirms to din 53505 and american standard astm 2240 range : 0-100 shore,  shore-a  (for soft rubber & plastic)   range : 0-100 shore, shore –c (for testing winding density of textile cones, bobbins, quills, and packages)   range : 0-100 shore, shore- d (for hard rubber,  plastics, ebonite, graphite, & backlight)   packing - wooden box with test pc warrantee – one year against all manufacturing defects only

Made By : Tohnichi Made In : Japan Model No. : RNTD Series   Rotary Slip type Torque Screw Driver RTD/RNTD style with Limit Switch output Ideal for Torque verification (Pokayoke) assembly processes Features : Rotary slip clutch type. Preset version of RTD model. Toggle type torque detection mechanism ensures accuracy and long durability. Preventing over-torque by "Slipping" when more force is applied beyond set torque. Suitable for single purpose tightening. T-bar is standard accessory. (RNTD 500CN only) Applicable to use in the EU region. Comply with calibration procedures of ISO6789 Type II Class E.

Model No. : PUV-80       PRODUCT FETURES  PRECISION UNIVERSAL VICE   • The vice is made of two parts : vice body and swivel base, horizontal swivel goes through 360 deg, 45 deg,     Angle tilts vertically. The accurate graduations and three-way swivelling feature make it greatly suitable     for straight, inclined surface or angular machining and drilling on grinders and milling machines.

Made By : Goldsmith Model No. : PSTVP       PRODUCT FETURES Precision Sine Tool Vice ( Pin Type ) Series PSTVP The precision tool vices • Made of high – quality tool steel. Hardened & precision ground, parallelism ± 0.005mm / 100mm, squareness ± 0.005mm Hardness HRC 58 – 62. • Precision sine vice is used to obtain accurate angle by t he use of slip gauge, Apart from its use on milling & grinding machine this since vice can also be used as a reference for inspection purpose

Made By : Goldsmith Model No. : PCSV-45       PRODUCT FETURES  PRECISION COMPOUND SINE VICE SERIES PCSV 45 DEG. •  Made of high-quality tool steel. The hardness of working surface reaches HRC58~62 •  The precision compound sine vice is developed for processing at various angles. It is used for grinding,     cutting, making holes, and for measuring. •  Adjustable angle range : 0 deg. ~ 45 deg.

Made By : Sanchi Model No. : HardTest 10       PRODUCT FETURES Portable Hardness Tester is a small, light and portable tester. It is most suitable for testing of heavy, big or outdoor metal parts. It conforms to the Standard ASTM A956 & DIN 50156.   Specifications Accuracy - ± 6 HL Scales - RC, HRB, HB, HV, HSD, MPa Display - Bright and clear LCD display with backlight Testing direction - All direction Optional Impact Device - D, DC Printer - Wirless Mini-printer Power supply - 4.5v ( 3 AAA batteries ) Operating enviornment - Temperature : -10 ~+40oC Humidity : 20% ~ 85%   Storage enviornment - Temperature : -30 ~ +80oC Humidity : 5% ~ 95% Dimensions - 152mm * 83mm*27mm Weight - Approx.190g Accessories - Display Unit, Impact Device D, Test Block, Mini-printer, Charger, Little Support Ring, Cleaning Brush Certificate - CE  

Made By : Sanchi Model No. : HardTest 20       PRODUCT FETURES Metal Hardness Tester is a small, light and portable tester and most suitable for testing of heavy, big or outdoor metal parts. It can measure in any direction and also easy to be used and accurate on curved test surfaces. Especially, it canautomatically compensate effect of weight which according to the test direction.It uses wireless IR to communicate with printer, operates with touch screen and test data could be linked into PC. Conforms to the Standard ASTM A956 & DIN 50156 Specifications HL display range : 170~960HLD Repeatability : 6HLD Testing direction : All direction Optional Impact Device : D, DC, DL, D+15, C, G ( Automatic identification ) Display : 3.9" 240*320 ( touch screen ), LCD display with back light Power : 3.6V ( rechargeable Ni - MH battery ) Charger : DC5V / 1 A Printer : Wireless Mini - Printer ( Cable no needed ) Communication : USB to PC for transfer data Operating environment : Temperature : -20oc ~ +50oc; Humidity : 20% ~ 85 % Storage environment : Temperature : -30oc ~ +70oc; Humidity : 5% ~ 95 % Dimensions : 130 mm *86mm*28mm Weight : 300g ( include D type impact device ) Accessories : Display Unit, Impact Device D, Test Block, Mini-printer, Charger, : Little Support Ring, Cleaning Brush, USB Cable, PC Software CD. Options : Impact Device DC; DL; D+15; C; G

Pencil Hardness Tester Pencil Tester complies with the requirements of ASTM D3363 and ISO15184 standard, through leaving a  superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness. Recommend to apply on the smooth film surface. Use variety of different hardness pencils, the angle between pencil and the coated surface is 45 deg, scratch on the coated surface under a certain of force, the scratch resistance hardness of the coating is the pencil hardness which just scratched the coating.   Pencil Hardness Tester Pencil Tester complies with the requirements of ASTM D3363 and ISO15184 standard, through leaving a  superficial trace on the dry coating film with a certain pencil hardness, the surface will be variably damaged by the hardest pencil to evaluate pass/fail or hardness. Recommend to apply on the smooth film surface. Use variety of different hardness pencils, the angle between pencil and the coated surface is 45 deg, scratch on the coated surface under a certain of force, the scratch resistance hardness of the coating is the pencil hardness which just scratched the coating.

Made By : Insize Made In : China Model No. : 3203 Series Features   ·         Carbide measuring faces. ·         Resolution : 0.01mm ·         Meet DIN 863 ·         Supplied with setting standards (except 0-25 or 0-1”)

Made By : Oppama Japan Made In : Japan Model No. : PET-2000DX Oppama Industrial Co. Ltd. - Japan Mount Type Engine Tachometer, Oppama (Japan) This Tachometer is new version of old PET-2000 and can measure engine RPM, maximum RPM, total cumulative operating time resetable cumulative operating time. This has dual display system for eigher current RPM alone or current and maximum RPM and also has tow maximum RPM memories for comparison.