Bleed Valve Dealers in Delhi

L&T Valves manufactures a wide range of butterfly control valves for the power and hydrocarbon industries.The valves are designed using state-of-the-art 3D design, simulation and analysis software. Finite Element Analysis (FEA) and Computational Fluid Dynamics (CFD) are used to fine-tune product performance. Rigorous prototype tests - both in-house and at advanced flow-control research establishments - ensure that the customised solutions meet customer expectations. Butterfly Control Valves, ideal for high flow-rate applications, are available in ASME classes 150 and 300, in sizes up to 24" (600 mm). Butterfly Control Valves are built on the SIL-3 capable Triple-offset Butterfly Valves that provide bidirectional bubble-tight sealing. The control valve offers flow characteristics close to linear making it ideal for both control and on-off services. Range 1. ASME classes from 150 and 300 2. Sizes up to 24" (600 mm) L&T Butterfly Control Valves are offered in a variety of body styles, materials and actuation options to meet customer requirements. Actuator Options 1. Pneumatic 2. Hydraulic 3. Electrical Features 1. Bidirectional bubble-tight sealing 2. Triple-offset geometry - low wear-and-tear, low torque 3. Metal-to-metal seats 4. Longer service life 5. Anti-blowout shaft 6. Suitable for temperatures up to 538�C (1000�F) 7. Meets ISO 15848-1 Class A Fugitive Emission & NACE: MR0175 requirements 8. Can be offered with Valve Diagnostic Software to monitor and enhance valve/ process performance Compliance Standards 1. Design - API 609 (Category B) 2. Pressure Temperature Rating - ASME B16.34 3. Leakage Class - ANSI/ FCI 70-2 4. Systematic Integrity (SIL) - IEC 61508 Download Catalogue Butterfly Control Valves Double Block & Bleed Valves L&T Valves manufactures a comprehensive range of Double Block & Bleed (DBB) Plug Valves in sizes up to 30" (750 mm), and in ASME classes from 150 to 600. The valves are offered in a combination of materials and actuation options to suit customer requirements. The highly reliable valve has successfully completed over 10,000 cycles at its rated pressure. Double Block & Bleed Plug Valve provides online-verifiable bubble tight sealing and is a safe and reliable replacement to the conventional two-valve system. In this valve, high integrity positive shut-off is obtained mechanically, independent of line pressure, without sealants/ lubricants. Globally, the valve has emerged as the industry standard for movement and storage of petroleum products in refineries, petrochemical plants pipelines, tank farms and terminals. In-house Test Facilities 1. Antistatic Test 2. Drive-train Strength Test 3. Endurance Test 4. Fire Test 5. Fugitive Emission Test 6. Torque Test The quality management system has been certified to comply with 1. ISO 9001: 2008 2. API Spec Q1 Established processes control all stages of manufacture to ensure quality consistent with international standards and customer requirements. A world-class manufacturing and QA infrastructure guarantees that each DBB Plug Valve delivers reliable performance. Dimensional accuracy and consistency are obtained using CNC and Special Purpose Machines. International health, safety and environment standards govern every phase of the manufacturing process. The plants are zero discharge units and are pioneers in green initiatives. Compliance Standards DBB Plug Valves are designed in accordance with key international standards. They also meet the requirements of major hydrocarbon industry standards and customer specifications.

"YASH” make Bleed valves are designed for use on products such as multi-valve manifolds, or gauge/root valves. Functionally, the valve vents line pressure either to atmosphere or to containment when used with optional barbed vent tube. Bleed valves are used whenever an instrument is removed from a system or to assist in the calibration of control devices.Bleed Valves are also called Double Block & Bleed valve generally, as this valve is made up by two ball valve and one needle valve or two ball valve and a globe valve.Double Block and Bleed valves have evolved to replace and add the process of bolting together individual valves to make the valves in one body. it saved a lot of space and material, it is the development tendency of the valve in the future. These new assembly of the double block & bleed valve provides great savings in weight, space and installation times especially in cage isolation. Double Block and Bleed valves have evolved to replace the process of bolting together individual valves to provide dual isolation. This new assembly provides great savings in weight, space and installation times especially in instrument & can be seen in the reduction of leak paths to atmosphere       MONOFLANGES OR SINGLE BLOCK & BLEED VALVES One Piece Ultra Slim line Forged Body combines a compact design with strength and reduced potential leak paths compared to conventional designs. Flanged Connections available on inlet or inlet and outlet in a choice of sizes and ratings to suit each particular application. Gauge Adaptors allow flexible positioning of gauges and instruments with a choice of designs available.   Technical Specification Size Range : 15mm to 600mm Pressure Rating : ANSI - 150#, 300#, 400#, 600#, 900#, 1500#, 2500# Standard : Designed and manufactured to conform API/BS/DIN STANDARD End Connections : Flanged connections to ANSI B 16.5 Type : NYLON SEAT PACKING BLOCK VALVES BALL TYPE, BLEED VALVE NEEDLE TYPE, WITH BOLTED BONNET DESIGN Max Temperature: -52 degree C to +250 degree C depend on different material. Material : Stainless Steel, CS A105, Brass, Alloy steel Operation : Pneumatically controlled, electrically controlled - Smooth, Easy, Low-Torque, Long life Quality : Highest standard in Visual, Materials, Dimensional Accuracy, Operation, Leak-tightness Testing: Each valve is 100% tested to ensure leak-tightness at Shell, Seat and Gland. Application Industries : Petrochemical, Power, Energy, Thermal, Refineries, Fertilizers, Chemical, Pharmaceutical

L&T Valves Limited manufactures a comprehensive range of Double Block & Bleed Plug Valves in sizes up to 30” (750 mm) and in ASME classes 150 and 300. The valves are offered in combinations of size, pressure class, material, end-connection, etc to suit customer requirements. Double Block & Bleed Plug Valve provides online-verifiable high-integrity positive shut-off, and is a safe and reliable replacement for the old two-valve system. Globally, the valve has emerged as the industry standard for movement and storage of petroleum products in refineries, tank farms and terminals. L&T Double Block & Bleed Plug Valve is designed in accordance with key international standards. It also meets the requirements of major oil & gas industry standards and customer specifications Salient features : Double Block & Bleed Valve. Mechanically-assisted sealing - Reliable bubble-tight shut-off at low and high pressures. Cavity Pressure Relief System (provided to relieve the built up cavity pressure). Non-lubricated - Sealant not required to achieve zero leakage. Unique valve operation mechanism - Segments do not rub against seats during plug rotation Cavity Relief System - Prevents body cavity pressure build-up. Pressure relieved to upstream or downstream based on customer requirement. On-line maintenance - Segments can be replaced on line. Fire-Safe Drain provided for online verification / draining the cavity.

We are offering bleed valves. Available in ss316l • heat code traceable to certified material test report • compact and convenient installation • vent tube design prevents accidental removal of the stem • vent tube directs excess liquid or gas from system line • flow coefficient (cv) 0.25 • orifice size 0.125" (3.20mm) • variety of end configurations includes sealexcel® well-lok™ tube fittings, malefemale npt, and sae pipe connection • every valve is factory tested

We offer d series double block & bleed valves . Reliance d series double block and bleed valves feature two valves that provide isolation, calibration and venting service in one compact unit. Supplied with a standard orifice of 0.19” (4.8mm) the entire d series range is provided with a 14”female npt bleed port, supplied plugged, for installation of a vent tube assembly to facilitate user safety while bleding the system. The d6 line of double block & bleed valves is rated for use upto pressures of 6000 psi (414 bar) while the dx series provides all the features of the d6 and can be used for pressures upto 10000 psi (689 bar

We deals in supplying of wide range of Bleed Valves.

Bleed slab Gate valves