Bod Incubator Dealers in Pitampura, Delhi

• Brand Name: U-Tech
• Temperature Range: 5 to 75 Degree Celsius
• Voltage: 220-240v Single Phase
• Material: MS
• Weight: 80-150 kg

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stove powder coated paint. Insulation between inner and outer wall is done with 75mm thick glass wool to prevent any heat loss. Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height. Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock etc. Provided with door operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5°C to 60°Cand is controlled by electronically controlled by PID Microprocessor Controller with PT-100 sensor. This controller is provided with time delay relay to control the accuracy in maintaining the temperature. Temp. is maintained with an accuracy of + 0.5°C. Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly. Heating is done with ISI mark strip type heaters placed near the cooling coils. Air is circulated by 2-nos. ISI mark Silicon bind motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/Off switch, Indicators, Digital Controllers etc.

 Biochemical Oxygen Demand (BOD) incubators or low temperature incubators enable end users to determine levels of organic matter and nitrogen in wastewater samples. This wastewater must be effectively measured for contaminates, treated and then released back into the environment without posing a threat to the water supply system. Recently, stricter enforcement by government regulatory agencies charged with monitoring air and water quality has forced a greater number of organizations to actively test and treat their wastewater. BOD incubators facilitate the storage of wastewater samples, and can accommodate from 62 – 565 BOD bottles. Microprocessor based temperature regulator(HMI+PLC as an option) CFC free refrigeration unit RS232 interface incorporated Calibration and protocol documentation Castor wheels for ease in movement. Providing fast and accurate results Digital Display Temperature Safety Thermostat Push-button controls for temperature set point selection Forced-air circulation delivers excellent temperature stability Easy-to-clean, corrosion-resistant construction Compressor relay conserves energy Full opening door with silicon gaskets hinged on left side Heated viewing window

Orbital Shaking cum BOD Incubator (PLT-146) APPLICATIONS OF ORBITAL SHAKING INCUBATOR cum BOD Incubator "TANCO" brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth.. Specially designed for Orbital Shaking under controlled Incubations / Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies. SALIENT FEATURES & CONSTRUCTION OF ORBITAL SHAKING INCUBATOR cum BOD Incubator Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. Inner chamber made of STAINLESS STEEL SHEET (304 Grade). Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber. Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.. Stationery shelves made of Stainless Steel (SS-304) for use of the unit as a standard B.O.D. Incubator, can be supplied at extra cost.. Door operated illumination lamp is fitted inside the chamber for easy visibility. A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. High grade PUF INSULATION between outer and inner chamber for minimal thermal losses. Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant. Heating elements are placed in the path of moving air duly insulated from the body. Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage. Caster wheel mounted for easy portability. Supplied with cord and plug. Operating Voltage: 220 Volts AC (50 Hz).

• Brand Name: Rebico
• Material: Metal
• Application: Industrial
• Resistivity: Rust Resistant
• Durability: Long Life
• Surface Finishing: Polished
• Drive Type: Electric

Our company is a prominent Manufacturer and Supplier of BOD Incubator (RS00I0101). The BOD Incubator is specially designed for incubation of Biochemical Oxygen demand on water and sewage; this can be used as environmental study and growth chamber by incorporating lighting and humidification system. The BOD Incubator is triple walled with anodized Aluminum/S.Steel from inside and mild steel outside fitted with air circulating fans. The BOD Incubator has a full view inner glass door with magnetic gasket that allows inspection of samples without disturbing the temperature of cabinet. Range 5oC to 60oC with an accuracy of ± 0.5oC by Solid State Digital Temperature Indicator cum controller. Refrigeration is done by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant and heating by air Heaters. Control panel has separate heating and cooling indicator lamps; temperature set allows the user to select any desired temperature. Voltmeter is provided at the panel to check the incoming voltage.

• Country of Origin: India
• Type: Bod Incubator
• Material: Mild Steel, Stainless Steel
• Certification: CE Certified, ISO Certified
• Application: Industrial Use, Medical Use
• Color: Blue
• Voltage: 220V
• Condition: New
• Frequency: 50Hz
• Temperature: 5 TO 75C
• Volume: 100 TO 1000 LTR
• Automation Grade: Automatic
• No of Shelves: 3 Shelves
• Brand Name: SHIVAM
• Power Supply: 220V

Double walled Chamber with interior walls made of stainless steel. The exterior is made heavy mild Steel powder coated.. The door is also a double walled construction. The Temperature range is from 5-60ºC, with an accuracy of +/-0.5ºC, controlled by Digital Temperature controller cum Indicator. Temperature below ambient is maintained by a hermetically sealed TECHUMSHAH/KIRLOSKAR Condensing Unit / Compressor with complete unit provided at the bottom, Complete with Stainless Steel Trays, two air circulations fan and unbreakable acrylic transparent, inside door. To work on 220/230 V, Single phase AC Supply. Optional Accessories: Inner illuminator with 3 Nos. fluorescent tubes of 60cm. Automatic cyclic timer 0-24 hours regulating illuminating cycle Arrangement for incubating in CO2 and Air mixture with an inlet nozzle provided with a means of admitting of CO2 . RS-232 interference for computer compatible with software

• Voltage: 220 V
• Power Source: Electric
• Display Type: Digital
• Phase Type: Single Phase

• Double Walled Construction with Inner S.S. 304 Outer M.S. Duly Powder Coated Outer S.S. 304 • Gap between the walls is filled with special PUF Insulation to prevent thermal losses. • Full view inner glass door. Lock & Key arrangement, Caster wheel mounted cabinet • Cooling is by hermetically sealed compressor with CFC free refrigerant. • (2) Two Nos of Air Circulating Fan for uniform temperature • Temp. is controlled by Digital Temperature Controller cum indicator • Temp. from 5ºC to 60ºC ± 0.5ºC. • Door operated Special LED light illumination system inside the chamber • Supplied by wire mesh trays for uniform temp. • Complete with Cord & Plug to work on 220 Volts A.C. • Digital voltmeter is fitted on the control panel for displaying the Mains Input voltage.

Kjeldahl Distillation Assembly, Laboratory Ovens, Laboratory Furnace

• Accuracy: 1% of Full Scale or ± 2°C. (Software Linerlized)
• Power Supply: AC 180 - 240 V AC (50/60 Hz)
• Dimensions: 96(W) x 96(H) x 110mm(D)
• SENSOR INPUT: PT-100
• DISPLAY: Dual Display (For Set Point & Current Temperature)
•  : 41/2digit upto full range
• CONTROL ACTION: Time Proportionating (Proportionate Band 3% of Full Scale) ON/OFF Control : Hysteresis (optional)
• CONTROL OUTPUT AVAILABLE: Relay Control : AC 250V, 5Amp (Resistive Load) IC (NO/NC) Contact SSR Driving: 0/12V DC (Control Voltage Pulse Load Resistance more than 1000 ohms) (optional) Current : 4-200mA DC (Load Resistance less than 800 ohms)
• NO. OF OUTPUT STAGE: 1 Stage for Heating & 1 Stage for Cooling.
• COOLING DELAY: Adjustable by front Key Pad.
• HEATING (PI ACTION): Adjustable by front Key Pad.
• TEMPERATURE SETTING: By Front Key Pad.
• AMBIENT TEMP./ HUMIDITY: 0-50°C, 35 to 85% RH
• REOLUTION: 0.1°C up to 60.0°C
• SENSOR ERROR: Adjustable + 9.9°C TO -9.9°C,

Deep Freezer, Scanning Electron Microscope, blood plasma freezer, Centrifuge

Autoclave Vertical, oven universal, Magnetic Stirrers, Hot Plates