Bod Incubator Dealers in Shakurpur, Delhi (13 products available)

• Double Walled Construction with Inner S.S. 304 Outer M.S. Duly Powder Coated Outer S.S. 304 • Gap between the walls is filled with special PUF Insulation to prevent thermal losses. • Full view inner glass door. Lock & Key arrangement, Caster wheel mounted cabinet • Cooling is by hermetically sealed compressor with CFC free refrigerant. • (2) Two Nos of Air Circulating Fan for uniform temperature • Temp. is controlled by Digital Temperature Controller cum indicator • Temp. from 5ºC to 60ºC ± 0.5ºC. • Door operated Special LED light illumination system inside the chamber • Supplied by wire mesh trays for uniform temp. • Complete with Cord & Plug to work on 220 Volts A.C. • Digital voltmeter is fitted on the control panel for displaying the Mains Input voltage.

• Type: Good Quality
• Model Number: REW-203
• Brand Name: REW
• Certification: ISO-9001-2008
• Color: White

We are offering bod incubator. temperature range 5°c to 50°c with an accuracy of +/- 1°c double walled inside s.steel and out side mild steel painted and two air circulation fans. Full view inner glass door with magnetic gasket allows inspection of samples without disturbing the temperature of cabinet. To work on 220/230 volts. A.c.

• Brand Name: U-Tech
• Temperature Range: 5 to 75 Degree Celsius
• Voltage: 220-240v Single Phase
• Material: MS
• Weight: 80-150 kg

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stove powder coated paint. Insulation between inner and outer wall is done with 75mm thick glass wool to prevent any heat loss. Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height. Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock etc. Provided with door operated illumination lamp. Whole unit is mounted on castor wheels. Temp. Range is from 5°C to 60°Cand is controlled by electronically controlled by PID Microprocessor Controller with PT-100 sensor. This controller is provided with time delay relay to control the accuracy in maintaining the temperature. Temp. is maintained with an accuracy of + 0.5°C. Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly. Heating is done with ISI mark strip type heaters placed near the cooling coils. Air is circulated by 2-nos. ISI mark Silicon bind motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/Off switch, Indicators, Digital Controllers etc.

B.O.D. incubators often called low temperature incubators are one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs. BOD incubators by M.K. Scientific Instruments are known as exceptional lab incubators specially designed for a variety of incubation and testing applications. The series of BOD incubator is perfect for BOD testing and other related jobs of research. Designed to meet customized requirements of different customers, M.K. Scientific Instruments as an experienced BOD Incubator manufacture in INDIA, The Biochemical Oxygen Demand incubator comes in various sizes and capacities.   CONSTRUCTION: BOD incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Cabinet is mounted on castors for easy movement from one place to another.   Shelves:Each Biochemical Oxygen Demand incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 4 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.COOLING: Cooling quality is one of important factors that need to be checked before choosing any BOD incubator for effective cooling, M. K. Scientific Instruments CFC free refrigerant.   Doors: The doors of these BOD incubators are available in Glass or solid doors. If you are looking for customized incubator you may ask your choice of doors. Furthermore glass door is more comfortable to use for easy viewing of object inside to be researched.   TEMPERATURE RANGE: These BOD incubators by M.K. Scientific Instruments are come in temperature ranges from 5°C to 60°C with temperature accuracy of +/- 0.5°C and temperature uniformity of +/- 1°C. The Controller is totally electronic controlled with Digital display for accurate temperature rating.   SAFETY: To provide proper safety at work place and to enjoy safe use, these units are equipped with various safeties protection devices such as over current protections, leakage breaker and temper controls.   OTHER FEATURES: These units are come with easy to view LED/LCD display, door lock interior lamp, and Tubular air heater with fins heating system and run with 220-230 Volts power supply.

• Accuracy: 1% of Full Scale or ± 2°C. (Software Linerlized)
• Power Supply: AC 180 - 240 V AC (50/60 Hz)
• Dimensions: 96(W) x 96(H) x 110mm(D)
• SENSOR INPUT: PT-100
• DISPLAY: Dual Display (For Set Point & Current Temperature)
•  : 41/2digit upto full range
• CONTROL ACTION: Time Proportionating (Proportionate Band 3% of Full Scale) ON/OFF Control : Hysteresis (optional)
• CONTROL OUTPUT AVAILABLE: Relay Control : AC 250V, 5Amp (Resistive Load) IC (NO/NC) Contact SSR Driving: 0/12V DC (Control Voltage Pulse Load Resistance more than 1000 ohms) (optional) Current : 4-200mA DC (Load Resistance less than 800 ohms)
• NO. OF OUTPUT STAGE: 1 Stage for Heating & 1 Stage for Cooling.
• COOLING DELAY: Adjustable by front Key Pad.
• HEATING (PI ACTION): Adjustable by front Key Pad.
• TEMPERATURE SETTING: By Front Key Pad.
• AMBIENT TEMP./ HUMIDITY: 0-50°C, 35 to 85% RH
• REOLUTION: 0.1°C up to 60.0°C
• SENSOR ERROR: Adjustable + 9.9°C TO -9.9°C,

 Biochemical Oxygen Demand (BOD) incubators or low temperature incubators enable end users to determine levels of organic matter and nitrogen in wastewater samples. This wastewater must be effectively measured for contaminates, treated and then released back into the environment without posing a threat to the water supply system. Recently, stricter enforcement by government regulatory agencies charged with monitoring air and water quality has forced a greater number of organizations to actively test and treat their wastewater. BOD incubators facilitate the storage of wastewater samples, and can accommodate from 62 – 565 BOD bottles. Microprocessor based temperature regulator(HMI+PLC as an option) CFC free refrigeration unit RS232 interface incorporated Calibration and protocol documentation Castor wheels for ease in movement. Providing fast and accurate results Digital Display Temperature Safety Thermostat Push-button controls for temperature set point selection Forced-air circulation delivers excellent temperature stability Easy-to-clean, corrosion-resistant construction Compressor relay conserves energy Full opening door with silicon gaskets hinged on left side Heated viewing window

• Features: The temperature in the BOD Incubator is controlled by a sensitive thermostat from 5oC to 50oC ± 1oC. For lower temperature working, a standard cooling unit with sealed compressor
• Aluminum / SS Chamber sizes: 4 cubic ft., 6 cubic ft., 10 cubic ft., 12 cubic ft., 15 cubic ft.

Orbital Shaking cum BOD Incubator (PLT-146) APPLICATIONS OF ORBITAL SHAKING INCUBATOR cum BOD Incubator "TANCO" brings the ultra-high-tech Triple walled Microprocessor controlled, solid-state Orbital Shaking Incubator down to earth.. Specially designed for Orbital Shaking under controlled Incubations / Temperature required for Tissue Cultures Fermentation Studies, & Ageing Tests., Life science applications & growth studies. SALIENT FEATURES & CONSTRUCTION OF ORBITAL SHAKING INCUBATOR cum BOD Incubator Robust construction outer chamber is made of Mild Steel duly pre treated & finished with powder coated paint for lasting finish. Inner chamber made of STAINLESS STEEL SHEET (304 Grade). Fitted with durable coaxial blower for forced air circulation at triple walled back to maintain temperature uniformity in the chamber. Outer front double walled door is insulated and is fitted with magnetic tape for air tight closing for no temperature loss, provided with lock and key arrangement. Fitted with Universal Platform to accommodate interchangeable clamps of assorted sizes for different capacity of flasks.. Stationery shelves made of Stainless Steel (SS-304) for use of the unit as a standard B.O.D. Incubator, can be supplied at extra cost.. Door operated illumination lamp is fitted inside the chamber for easy visibility. A full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. High grade PUF INSULATION between outer and inner chamber for minimal thermal losses. Cooling is done by finned tube evaporator lie in the air circulation path by ISI marked Compressor/Condensing Units CFC free & R-134 a eco friendly refrigerant. Heating elements are placed in the path of moving air duly insulated from the body. Control panel having all controls and circuitry are housed at the top fitted with Temperature controller cum Indicator Microprocessor based with LED display for Set Value (SV) & Process Value (PV) to select any desired temperature provided with Volt meter on the panel to read the incoming voltage. Caster wheel mounted for easy portability. Supplied with cord and plug. Operating Voltage: 220 Volts AC (50 Hz).

• Microprocessor Control System: PID temperature controller
• Safety thermostat for over temperature protection: meet APHA specifications Biochemical Oxygen Demand
• CFC free cooling systems (branded): Printer interface (DOT Matrix)
• Designed with and without orbital shaker: Complete IQ, OQ and PQ documentation
• Fully Adjustable Shelves: Caster wheels for easy mobility
• Double walled construction with insulation: Audio visual alarm alerts

BOD Incubators are designed to meet incubation criteria required in bod analysis of water and wastewater samples, fermentation studies, plant and insect studies and bacterial culturing etc. Equipping with superior quality instruments, they deliver the performance, quality and reliability required by researchers and clinicians worldwide. Often called low temperature incubators, our BOD Incubator systems are constructed with corrosion resistance stainless steel and fitted with branded instruments; offering reliable results and comfortable working all the time. The standard models are available from 68 liters to 425 liters of capacities; in addition, we also offer custom designing with choice of construction materials, instruments, optional accessories and other features as per budget of our clients. No doubt, we supply them all over India and overseas at highly competitive price.   Design & Construction BOD Incubators manufactured here are in various designs; choose from our standard models that are available as undercounter, floor-standing, single and double doors units etc. Each system features temperature range 2°C to 60°C with uniformity of ±0.5°C @ 20°C. Microprocessor PID controller delivers superior temperature control accuracy, required for precise results. Our features and advantages include illumination lamp, caster wheels for easy mobility, digital timer and quality certifications. Below mentioned are technical specifications of our standard BOD incubator models, helping you to decide which unit is best suitable for your laboratory and application. If you need any customization in them, please discuss with us, we can modify the equipment and make it suitable for your requirements; GMP models also available.   Options Our BOD Incubator systems are designed and supplied with variety of options to suit your unique test requirements. We also supply Dissolved Oxygen (DO) meter and pH test meter for further analysis. The equipment can also be equipped with number of additional accessories including humidity system, fluorescent tube lighting, digital timer and humidity control and arrangement for incubation of co2 air mixture. If required, we also provide IQ, OQ, DQ, and PQ validation documents.

Fermenter Vessel, Mortuary Chamber, industrial electric ovens

Incubators, Kjeldahl Distillation Assembly, Soil Moisture Meter

Fermentor Vessel, industrial electric ovens, Blood Bank, Freezer Dryer

Scanning Electron Microscope, blood plasma freezer, Centrifuge