Breakdown Voltage Testers Dealers in Shankar Road, Delhi (4 products available)

• Open Circuit Voltage: 0 to 5 KV OR 0 to 10 KV AC. The above voltage can be continuously varied from zero to full value and is continuously monitored by Digital Panel meter.
• Power Requirements: 230 volts AC, ± 10%, 50/60 Hz

High voltage breakdown tester OR HV Tester is useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. can be used to ascertain quality of insulation material before planning their usage in electrical applications. The front panel incorporates all controls for operation of the unit. Easy to use test probes with micro-switch supplied to connect the output high voltage to the device under test.

The high voltage breakdown tester is commonly used for determining the dielectric breakdown voltage strength in material through the thickness of a test specimen as per relative Indian & international codes. The high voltage strength of an electric insulating material is a property of interest for any application where an electrical field will be present. The conditions are applied between the insulating & conducting material. The test, which is specified here in may be used to provide part of information needed for a given application & also for detecting changes or deviations from normal characteristics resulting from processing variables, aging condition or other manufacturing or environmental situation. This method is useful for process control, acceptance or research testing.

• Test Current: 3 mA to 30 mA OR 3 mA to 100 mA
• Power Requirements: 230 volts AC, ± 10%, 50/60 Hz

High voltage breakdown tester OR HV Tester is useful for measurement of breakdown (flashover) voltage of electrical components, insulation materials instruments, transformers, etc. can be used to ascertain quality of insulation material before planning their usage in electrical applications. The front panel incorporates all controls for operation of the unit. Easy to use test probes with micro-switch supplied to connect the output high voltage to the device under test.

• Input VOLTAGE: 230, ?10% 50Hz, 1 Phase AC
• utput voltage: Cuntinuously variable from (i) 0 to 3 KV for 3 KV Test Set (ii) 0 to 5 KV for 5 KV Test Set
• Capacity: 50mA maximum in the H>V. Side
• Tripping current: 50mA & 50mA (Toggle switch provided)
• Duty Cycle: Intermittent i.e., 5 min. ON & 10 min. OFF
• Mode of Operation: Manual
• KV Meter to read the output voltage: Milliammeter to show leakage current