Bunched Cables Dealers in Delhi

Aerial bunched cables we are one of the promising aerial cables. The aerial bunched cables (abc) that we deal in are required for electrical transmission system or a telecommunication line, which is suspended between utility poles or electricity pylons. Aerial bunched cables provide safety and reliability compared to other cables. We provide only the best and thus have created repute amid the prominent aerial bunched cables suppliers in india. 1100 volt grade cables are mostly used for distributing power to individual consumers by utility service providers like electricity boards, electricity distributing authorities. 10000 volts grade cables are also use, for the supply of farms, waterworks, transmitters and other facilities outside urban areas. A further common use is the replacement of overhead telecommunication lines, for example, along railway line, by aerial cables as they can be installed on existing poles and make the facility more reliable aerial cable is more valuable for long term economy, safety and reliability overhead conductor. It is better choice for power distribution in densely populated areas where laying the underground cable is either difficult or extremely expensive advantage >> easly installation in uraban, congested, or forest area. >>saving in cost >>human safety in case of accidental contacts >>water proof system >>multiple circuits of power and telephone cables could be strung in the same set of poles.

• Application: Home, Industrial
• Color: Black
• Feature: Crack Free, Durable, High Ductility
• Outer Material: Rubber
• Internal Material: Copper
• Conductor: Stranded Aluminium Conductor

11 KV & 33 KV Aerial Bunched cables are used for power distribution in cities where ground space is constrained.   Configuration    Size ranges from 35 Sq mm to 400 Sq mm. Three phase cables constitute of three single core screened cables. These phase cable twist around an Aluminum Alloy messenger conductor which carries the full load of the cable when mounted on poles. The size of the messenger conductor is designed based on the weight of the cable over a span of poles.   Screening Screened by an extruded semi conducting layer - XLPE Insulated. Screened again by an extruded semi conducting layer and a copper tape.   Insulation XLPE Phase Identification Coloured polyester strip Red, Yellow and Blue, under copper tape Ridges 1, 2 and 3. Outer Sheath Overall sheathed with PVC/ Polyethylene.

• Thickness: 0.5-1mm
• Application: Home, Industrial
• Color: Black
• Voltage: 110V
• Power: 1-3kw
• Feature: Crack Free, Durable

We have pioneered in supplying Aerial Bunched Cables. The Aerial Bunched Cables that we offer are widely used for power distribution in rural and congested areas with narrow lanes and by-lanes. These Aerial Bunched Cables are specially designed conforming to IS: 14255 quality standards, in order to ensure high performance. Our Aerial Bunched Cables are highly demanded by the clients, owing to their striking attributes such as higher level of safety and reliability.. Applications : In theft prone areas As replacement of bare where space is limited As replacement of bare lines where high degree of supply voltage is stable In hilly terrains where cost of erection of overhead lines of under ground cable becomes very high As reinforcement of existing system without increasing voltage For temporary supplies Benefits : High capacitance and low inductance Lower voltage drop Higher current carrying capacitates Economical High insulation resistance to earth in all seasons Negligible leakage of current Multiple circuits of power and telephone cables could be strung in the same set of poles Better adaptability to the existing over-head bare conductor system without any interference Easy to maintain   LT Aerial Bunched Cabels as per IS: 14255-1995   Phase Conductor Aluminum Street Lighting Conductor Aluminium Messenger Conductor Aluminium Alloy Nom. Area Max. D.C Conductor Resistance At 20 Deg. C Nom. Thickness Of Insulation XLPE/PF Nom. Area Max. D.C Conductor Resistance At 20 Deg. C Nom. Thickness Of Insulation XLPE/PE Nom. Area Max. D.C Conductor Resistance At 20 Deg. C Min. Breaking Load Sqmm Ohm/Km mm Sqmm Ohm/Km mm Sqmm Ohm/Km KN 16 1.91 1.2 16 1.91 1.2 25 1.38 7 25 1.2 1.2 16 1.91 1.2 25 1.38 7 35 0.868 1.2 16 1.91 1.2 25 1.38 7 50 0.641 1.5 16 1.91 1.2 35 0.986 9.8 70 0.443 1.5 16 1.91 1.2 50 0.689 14 95 0.32 1.5 16 1.91 1.2 70 0.492 19.7 Composition and Designation of Lt Aerial Bunched Cables as per Red Specification No. 32   Designation Complete Bunched Cables Approx. Overall Dia. Approx. Total Mass   mm Kg/Km 3X16+25 19 250 3X16+16+25 19 310 3X25+25 22 330 3X25+16+25 22 390 3X35+25 24 430 3X35+16+25 24 490 3X50+35 32 580 3X50+16+35 32 640 LT Aerial Bundled Conductor (abc) Polymeric Insulated as per Bs: 7870 (part-5) 1999   Nominal Cross Sectional Area of Conductor Max. D.C Resistance At 20 Deg. C Of XLPE Mix Average Thickness Conductor Ultimate Tensile Strength of Insulation 25 1.200 1.3 4.1 35 0.868 1.3 5.6 50 0.641 1.5 7.6 70 0.443 1.5 11.0 95 0.320 1.7 15.3 120 0.253 1.7 19.4 Characteristics of Conductors and Cores for Lt Aerial Bunched Cables Asper Nfc 33-2099   Designation Conductor Average Thickness of Insulating Sheath Specified Min. Core Type Nominal Sectional Area No. of Strands Max. Linear Resistance At 20 Deg. C Min. Conductor Dia. Min. Breaking Strength Max. Breaking Strength Max.   Max.     Sqmm   Ohm/Km mm daN daN mm mm mm PHASE OR NEUTRAL NON RETURN 16 7 1.91 4.7 190 290 1.2 7 7.9   25 7 12 6 300 450 14 8.7 9.6   35 7 0.641 8.2 600 900 1.6 11.3 12.3   50 7 0.641 8.2 600 900 1.6 11.3 12.3   70 12 0.443 9.8 840 1260 1.8 13.3 14.3 NEUTRAL RETURN 54.6 7 0.63 9.2 1660 - 1.6 12.3 13 Composition and Designatin of Ht Aerial Bunched Cable as per Rec Specification No. 64   Designation Complete Bunched Cables Approx. Overall Dia. Approx. Total Mass Mm Kg/Km 6.35/11 KV 3X35+70 53 1450 6.35/11 KV 3X70+70 59 1900 Click Here For Technical Specifications Click Here For More Details

• Type: Aerial Bunched Cables
• Thickness: 1.2-1.5 Mm
• Certification: CE Certified, ISI
• Application: Home, Industrial
• Color: Black
• Voltage: 110V
• Power: 1-3kw, As Required
• Feature: Durable, Quality Assured
• Outer Material: XLPE
• Internal Material: Aluminium/Alloy
• Brand Name: NATCAB

Aerial Bunched Cable (ABC) Is A Very Novel Concept For Overhead Power Distribution. ABC Provides Higher Safety And Reliability Compared To Bare Conductor Overhead Distribution System. The Other Advanctages Are Lower Power Losses And System Economy By Reducing Installation, Maintenance And Operation Cost. This System Is Ideal For Rural Distribution And Specially Suitable In Difficult Terrains Like Hilly Areas, Forest And Coastal Areas Etc.ABC Is Also Considered As A Better Choice For Power Distribution In Densely Populated Areas Where Laying Of Underground Cable Is Either Difficult Or Extremely Expensive. This Is Attributed By Narrow Lanes And By-lanes Of Congested Urban Areas. Needless To Mention That ABC Is A Better Choice Due To The Flexibility Of Re-routing Demand, Should There Be Any Changes In Urban Development Plan.Bare Overhead Transmission Lines Are More Prone To System Failures Causing Immense Loss And Inconvenience To The Consumers.Aerial Bunched Cables Systems For LT Have Been Introduced Across The Globe To Arrest Such Problem. It Is Basically A Compromise Between Insulated Power Cable System And Bare Overhead Conductor.There Are 3 Or 4 Power Carrying Conductors Suitably Insulated And Laid Around A Bare Or Insulated Neutral/Earth Conductor. This Earth/neutral Conductor Carries The Entire Weight Of The Cable When Hanged On Transmission Poles/towers Suitably.The Chances Of Faults Are Reduced To A Great Extent Because The Conductors Are Insulated. However, It Lacks The Safety And Mechanical Strength Of Underground Cables. The Fact That ABC Runs Overhead And Hence It Is Never Subjected To The Mechanical Abuses That An Underground Cable Undergoes.ABC Ensures Good Protection Against Ground And Line Faults Ensuring System Reliability, Increased System Efficiency Compared To Bare Overhead Lines. The Problem Of Free Clearance Is Also Minimized. ABC System Hinders Tampering With Power-line Like Hooking Resulting In Efficient Power Utilization.Advantages :   Easier Installation Particularly In Congested, Forest Or Hilly Areas. Saving In Cost Of Poles, Insulators, Cross-arms Etc. Human Safety In Case Of Accidental Contacts. Water Proof System, No Corrosion. System Reliability Hence Customer Satisfaction. Reduced Clearance.   Insulated Neutral :In Low Voltage Networks, In Case Of Unbalanced Load On The 3 Phases, A Current Can Flow In The Neutral. This Flow Of Current Causes A Voltage To Be Present In The Neutral. This Voltage Can Reach Dangerous Levels Even In 'Earthed' Conditions.It Is Observed That The Permissible Voltage Shift Between Neutral And Earth Can Go Up 100 Volts! This Surely Establishes The Need For An Insulated Neutral. Moreover, Parallels Can Be Drawn With The Underground Cables. A Single Insulation Damage On The Conductor Will Not Necessarily Trip The System, Unless An Adjacent Conductor Also Suffers An Insulation Damage At The Same Point. Unlike In Underground Cables System There Are Lot Of Relative Movements Between The Conductors Leading To Abrasion Which More Likely To Damage The Adjoining Insulation If The Netural Is Not Insulated

• Type: Aerial Bunched Cables
• Thickness: 9.5-10mm
• Application: Industrial
• Voltage: 220V
• Power: 9-12kw
• Feature: Durable

Application: Typically used in over-head power transmission & distribution and in temporary installations Conductor: Aluminium Circular Phase Conductors with messenger upto 120 mm.sq. Messenger: Aluminium Alloy or Galavanized Steel Messenger Conductor. Insulation: Polyetheylene, XLPE, HDPE

We are known amidst the prominent LT Aerial Bunched Cables Manufacturers and Suppliers in the industry. Made available for various applications, the LT Aerial Bunch Cables are manufactured to provide complete safety and high efficiency in operations. Manufactured to meet the Indian standards with perfection, our LT Aerial Bunch Cables are highly durable in nature. Features : Accurate dimensionCorrosion resistantExcellent insulationOffer lower power lossesCost-effective installation and maintenance Standard : As per IS specn. no.: 14255/1995 Suitable For : Hilly areasRural areasNarrow streetsAny area requiring supply of bare lines

The only solutions to distribute power in such areas, the system called ABC have been now widely adopted all over the world, specially in thickly populated areas and Narrow Street. In the ABC system, the insulated aluminium conductors (3 or 4) in numbers, as required on formation can be used in phase conductor as per the specific requirement of site - solution, which twisted around high strength aluminum alloy ACSR bareinsulated wire, which carries the main weight and also serve as earth cum neutral wire even streetlight phase can be combines in such formation: As such phase and street light conductors are not under tension: the insulated conductors (3 or 4 numbers as required) are twisted around a high strength Aluminium Alloy bare wire, which carries the main weight and also serves as the earth -cum- neutral wire. The bare wire (messenger) may be bare or insulated. The phase conductors are not under tension. The system is very safe and LT faults are practically eliminated consequently, interruptions of supply are minimized and the life of transformers is considerably increased, as these are not subjected to frequent fault as happens with the bear conductors. The problem of tree clearance is also minimized.

Aerial Bunched Cables (ABC) are used for Over Head Power distribution. When compared to the conventional bare conductor over head distribution system. Aerial Bunched Cables provides higher safety and reliability. This system is ideal for rural distribution and specially attractive for installation in difficult terrains such as hilly, forest & coastal areas etc.Aerial Bunched Cables is also considered to be a better choice for power distribution in congested urban areas with narrow lanes and by – lanes.

Ariel Bunched Cables, 1100 volt Grade, are used for distributing power to individual consumers by utility service providers like electricity Boards, electricity distributing authorities. The cable is kept supported on poles. The line is tapped intermittently from any required position which enables to be used in urban as well as rural areas alike. Phase or lighting conductor: Hard drawn Aluminium H2 or H4 grade as per IS:8130. Messenger conductor : Aluminium Silica and Magnesium Alloy used after treatment as per IS: 398 (part 4).

We are Offering Lt Aerial Bunched Cables 1100 Volts (3.5 Core). Reference Standard: Generally to is : 7098(1) 88.

• Color: Black
• Insulation Material: PVC
• Conductor Material: Aluminum
• Power/Voltage: 1100 V
• Cable Diameter: 16 to 185 sqmm
• Operating Temperature: -40 Deg C to +90 Deg C

We are one of the promising Aerial Bunched Cables Manufacturers. The Aerial Bunched Cables (ABC) that we deal in are required for electrical transmission system or a telecommunication line, which is suspended between utility poles or electricity pylons. Aerial Bunched Cables provide safety and reliability compared to other cables.

• Feature: High mechanical strength, Excellent electrical properties
• Size: upto 120 mm.sq.

• Outer Material: Rubber
• Internal Material: Copper
• Color: Black
• Application: Industrial
• Certification: CE Certified
• Voltage: 440V
• Country of Origin: India
• Brand Name: KYC & Preetika

Advantages :In comparison to bare overhead power distribution lines, ABC has very high reliability in maintaining services because power and neutral conductors are insulated with the best dielectric medium, resulting in the following advantages: High insulation resistance. Negligible leakage currents and low losses. Lower voltage drop, higher current capacities. So, Better Voltage Regulation. Longer spans and longer distance lines are possible with better system stability. ABC cables are much safer than bare Conductors. Total lines costs are reduced. Maintenance is very easy.

We are offering lt aerial bunched cables. with the growing need for long term economy, safety and reliablity overhead conductors are now being replaced by aerial bunched cables both in l.t. & h.t. Distribution network with limited space for clearance. Aerial bunched cables are basically a compromise between power cables and overhead conductors. aluminum conductor xlpe insulation aluminum (lightning) conductor mesenger the basic construction is as follows: 3 power cores consisting of standard aluminium conductors, insulated with xlpe insulation. one shealth lighting aluminium conductor with xlpe insulation (optional). one messenger al-alloy conductor (base or insulated).

LT Aerial Bunched Cables are made as per the international standards to give our clients maximum satisfaction. LT Aerial Bunched Cables are made from good quality materials to give optimum durability. These LT Aerial Bunched Cables work as messengers between the electrical poles, power cables and overhead conductors. LT Aerial Bunched Cables are popularly used for their low voltage drop facility. Type Hard Drawn Aluminium/ Silica and Magnesium Alloy, XLPE Insulation as per IS : 14255 Sizes 16 Sqmm upto 400 Sqmm Applications ABC for Distributing PowerPower Distribution to Individual ConsumersUtility Service Providers

We are offering aerial bunched cables.

We are offering lt aerial bunched cables abc for distributing power to individual consumers by utility service providers.

Indo Alusys Industries Limited is the reckoned entity engaged in manufacturing and supplying varied collections of Aerial Bunched Cables in India.

Aerial Bunched Cables, Submersible Cables, Lt Xlpe Cables

ariel bunched cables, single core cables, XLPE Power Cables

Ht Cables, LT Cables, pvc power control cables

Aerial Bunched Cables, Networking Data Cables- CAT-6e, CAT5E Patch Cable

Aerial Bunched Cables, Cable Conductors, Cable Termination

Aerial Bunched Cables, PVC Mining Cables, Signal Cables