Carbon Dioxide Detectors Dealers in Delhi

• Brand Name: Omicron
• Model Number: AZ - 7753
• Parameters: Carbon Dioxide
• Range: 0 - 5000 ppm
• Accuracy: 5% of F.S
• Power: 4 x AA 1.5V Batteries
• Temperature Measurement Range: 10.0
• Temperature Measurement Accuracy: +- 1.0 deg C / 2.0 deg F
• Relative Humidity Range: 0.1
• Relative Humidity Accuracy: +-5% RH (at 25 deg C 10

• Gas Type: Carbon Dioxide Detectors
• Sensor Type: IR
• Usage/Application: Gas Detection
• Display Type: Digital
• Model Name/Number: KS-7R
• Brand Name: New cosmos Electric Co., Ltd Japan
• Measurement Range: IN PPM
• Power Source: 24 v DC or 4 X AA dry cell battery
• Range: 5000 PPM
• Signal Output: 4-20MA
• Weight: 300 gm
• Minimum Order Quantity: 01 Number

• Type: Carbon Dioxide Gas Heater
• Certification: Yes
• Application: Outdoor Use
• Weight: 4.4 Oz (125 G).
• Color: Silver, White
• Voltage: 10 To 42 VDC / 10 To 30 VAC
• Condition: New
• Automation: Automatic, Fully Automatic, Manual, Semi Automatic
• Driven Type: Gas
• Warranty: 1yrs
• Brand Name: Dwyer
• Material: ABS
• Application: LEED ® Certification
• Power: 10 To 42 VDC / 10 To 30 VAC
• Output: 2-wire RS-485, Modbus® RTU Or BACnet MS/TP Communication Protocol.

• Display Type: Digital
• Model: CO2-801
• Measurement Range: 0-9999PPM

• Brand Name: tinselpro
• Measurement Range: 0000 to 5000 PPM
• Detecting Principle: IR Based
• Response Time: Less Than 30 sec
• Accuracy: +- 50ppm
• Operating Temperature: 0 to 55 Degree C
• Operating Humidity: Less Than 95%
• Alarming Method: Automatic Alarming
• Power Supply: 230 Volts AC
• Sound Level: Grater Than 80 Db
• Current: Less Than 80 mA (In measuring condition) Less Than 70 mA (In non measuring condition)
• Optional Function: Gas shut off valve, Relay output for exhaust fan, Input to Central Security System
• Outer Body: IP Console
• Detected Gas: CO2
• Sample Method: Diffusion
• Warm Up Time: Less Than 1.5 min

Stationary monitoring of carbon dioxide (CO2)   The IR 24 does not contain any moving parts, which may be subject to wear and tear. This ensures a long lifetime and low maintenance cost. Additional safety is provided by the permanent self-check and function test of the GMA controller. Sensor and electronics are protected in a solid enclosure from dust and water according to IP 54. This ensures that water cannot enter the detector, even in wet environments.Behind a service lid on the front of the IR 24 you find potentiometers and test connectors for easy adjustment of zero point and span. This allows one-man calibration on-site and reduces service down-time. Selective NDIR detection principle Long sensor life for low follow-up cost Easy handling Signal output either 0.2 .. 1 mA or 4 .. 20mA Potentiometers for easy adjustment of zero point and span Connectors for test of output signal Solid aluminium casing, IP 54 High reliability and repeatability of measurement results

Co2 Transmitter, Scada Software, strip chart recorder, Spindle Motor

Co2 Transmitter, Hand Hold Flammable Gas Detector, Humidity Recorder