Carbon Dioxide Incubator Dealers in Delhi

• CO2 Range: O to 20%
• Temperature Range: 5°C above ambient up to 55°C

JINDAL CO2 Incubator provides perfectly stabilized and sterilized environment for Cell Culture and study of temperature Co2 on human tissues. The incubator incorporates SS 304 Construction and Copper enriched stainless steel alloy interior surfaces to eliminate contamination sources, mitigate the effects of airborne contaminants introduced through normal use and provides high degree of Germicidal Protection. Laboratories and medical professionals, world over, rely on our Co2 Incubators. And, therefore, we are considered top CO2 incubator manufacturer and Co2 incubator suppliers.

Co2 Incubator   Generally used in experiments involving cultivation of animal cells, sperm/ovum, anaerobic cells, hatching etc. Cot range 0-20% Co2 accuracy - 1-0.5% Inlet pressure 1.5 bars approx. Temp. range 5 Deg.C above ambient to 60 Deg.c fast recovery - accuracy + /- 0.2 Deg.C at 37 Deg.C. High Humidity to achieve few percent above atmospheric humidity to 95% minimizing sample evaporation capacity approx 171 liters. Optional:- (a) UV decontamination Length - 253.7mm Power 4 Gw/l can price on request (b) Hot Air decontamination Time 8 hours programmed continues 3 to 4 hours recovery time to reset at 37 deg.c. and 5%. safety door lock during continues price on request (c) Oxygen Control Hypoxia & Hyproxia Range- 0,6 - 19% or 20 - 99% Zirconium Dioxide oxygen sensor price on request

• Application: Industrial Use
• Temperature: Ambient+10°C To 60°C
• FEATURES & BENEFITS: Air jacketed construction, Precise CO2 control and fast recovery, Automatic start function, Toughened glass observation door .
• Outer: Powder coated GI Sheet
• Inner: Stainless steel 304
• Insulation: Glass wool
• Outer door: Solid Outer w/ clamp handle
• Observation door: Toughened glass door
• Door Gasket: Silicone rubber gasket
• Tray: Perforated or wire mesh trays
• CO2 Sensor: IR Sensor
• CO2 Range: 2% to 20%
• Illumination: LED light
• Air circulation: Axial fan
• Humidity system: Water filled at bottom tank
• Sterilization: UV lamp
• Temperature control: Digital PID Controller, CO2 percentage setting, Temperature setting,  Humidity setting, Display of SV & PV
• Alarm: CO2 variation alarm, Temperature variation alarm, Humidity variation alarm
• Power supply: 220 Volts 50Hz
• Optional: Water jacket construction, HEPA filtered air inlet, GMP construction (All SS 304),  Data logging & printer, PLC based HMI controller .

We are offering co2 incubator the salvislab biocenter is the ideal co2 incubator for cell and tissue cultures. The innovative and reliable design concept ensures optimal conditions for your applications. The selected temperature control technology operates without any ventilation inside the chamber, thus reducing the risk of contamination to a minimum. Constant conditions for temperature, co2 and humidity are kept independent from the load. Biocenter bc 190 outside dimensions (wxhxd) mm 850x765x600 inside dimensions (wxhxd) mm 685x630x435 internal volume (l) 190 shelves (standardmax.) 48 weight biocenter (empty) kg 104 temperature range approx. >5â°c ort to (â°c) 60 temperature variation1) at 37â°c (â±â°c) 0.2 temperature fluctuation2) at 37â°c (â±â°c) 0.1 decontamination cycle at 200â°c yes co2 sensor ir sensor (drift-free) co2 range (%) 0.2 â�� 20 co2 variation (â±%) 0.2 co2 fluctuation (â±%) 0.2 co2 recovery time after 30 sec. Door opening (%min) > 0.7 co2 auto zero ir sensor (drift-free) water pan (l) 1.5 relative humitity at 37â°c (%)

• Volume: 4 Cuft, 10 Cuft
• DIMENSIONS (WXDXH) (mm): 455X410X610, 570X550X875
• CAPACITY: 112 ltrs, 280 ltrs

With the solid double walled door, a full view inner plexi-glass door enables inspection of specimens inside the chamber without disturbing the process temperature.The excellent quality of magnetic gum packing for the external door, User-oriented design of shelves makes you adjust each space of shelves without difficulty, With forced air circulation at triple walled back, it maintains optimum uniformity of distribution of temperature, High grade Polyurethane Foam (PUF) insulation between outer and inner chamber for minimal thermal loss, Caster wheel mounted exterior cabinet is made of steel sheet duly powder coated.Inner chamber and trays are made of stainless steel sheet (SS-304 grade), Front double walled door is provided with lock and key arrangement. Door operated illumination lamp is fitted inside the chamber for easy visibility, Safety thermostat to prevent overheating.

Unlike air jacket CO2 incubator where temperature is maintained by air circulation, the water jacket incubators chamber is surrounded by hot walls, filled with hot water. Water-jacked incubators are the more popular choice. A water jacket will hold the temperature longer than an air-jacket when power is lost. This is helpful in many situations; the incubator will be able to “recover” more quickly after a power outage and also get back to temperature more quickly after the door has been opened. It combines precise CO2 control with IR sensors. it feature precise unsurpassed temperature stability, and superior parameter recovery characteristics, with innovative continuous contamination control technology. Carbon Dioxide Incubators are intended for tissue and cell culture applications. The incubator control three essential variables; stable CO2 level, temperature, and relative humidity and creates an ambient environment for cells to thrive.   Clear LCD Display Dual Infra-Red Sensor Safety thermostats and over temperature protection Easy to use Round-Corner Chamber Design Low noise level Unique HEPA filtration system removes 99.97% of all airborne microbes and isolated particulates 0.3 microns or larger. Gas seal screen ISO certified Two point CO2 calibration Quick clean shelf system with allows users to disassemble shelves without tools CFC free refrigerator system RS 232 interface CFC free refrigeration unit

Roch Mechatronics Inc. CO2 Incubator's application includes industrial, Pharma, Biotech, Mediacal research.• Infra-Red CO2 Sensor by Digital Signal Processing• Auto Zero Calibration• Rrecise Digital PID Controller• Reliable and Accurate Temperature Control• Humidity Pan• Optional RS-232 Communication Interface Infra-Red CO2 Sensor by digital signal processing with automatic temperature compensation and auto zero calibration.Microprocessor PID Control provides precise temperature control up to 60°C , timer, alarm, auto-tunning (Option : automatic on/off function).10 Step Programmable Temperature control and 999 cycle.Seamless Rounded One-piece Chamber.Detachable Shelf Frame.Inner Tempered Glass Door with double silicon packing easy sample view without door opening.Stainless Steel Chamber Durable stainless steel chamber.Safety and Convenience over temperature and current protection capability ensure user safety

JINDAL CO2 Incubator provides perfectly stabilized and sterilized environment for Cell Culture and study of temperature Co2 on human tissues. The incubator incorporates SS 304 Construction and Copper enriched stainless steel alloy interior surfaces to eliminate contamination sources, mitigate the effects of airborne contaminants introduced through normal use and provides high degree of Germicidal Protection. Laboratories and medical professionals, world over, rely on our Co2 Incubators. And, therefore, we are considered top CO2 incubator manufacturer and Co2 incubator suppliers.

• Color: Blue
• Chamber Volume: 400 litre
• Application: LABORATORY
• Item Code: ASW9862
• Temperature Range: 5 to 105 degree celsius

Best uniformity and control among competitionFast CO2, temperature and humidity recovery without overshootDirect heat design for rapid recovery, with 8 heater grouped into 3 zonesAir jacket provides isolation against ambient temperature fluctuationsVentiFlow™ forced convection accelerates recovery of chamber air to ISO Class 5 Cleanliness after door closing to prevent contaminationFiltered air circulates across water pan to accelerate humidifying procesAir flows gently around culture plates, causing no disturbance to cell cultureBlower automatically stops when door is opened, to minimize mixing of chamber and room air SKU: SAMSBS022 Category: Beauty & Slimming Equipment

• Application: Hospital
• Material: Interior of full stainless steel
• Capacity: 150 & 240 liters
• Make/Brand: Thermo Fisher Scientific
• Model: Heracell150i, Heracell VIOS 160i
• Voltage (Volt): 240 V
• Frequency (Hertz): 50 Hz

We are offering co2 incubator, • with the solid double walled door, a full view inner plexi glass door enables inspection of specimens inside the chamber without disturbing the process temperature. • good quality of magnetic gum packing for external doors. User friendly design pf shelves makes you adjust each space of shelves without difficulty. • with forced air circulation at triple walled back, it maintains optimum uniformity of distribution of temper high grade puf insulation between outer and inner chamber for minimal thermal loss • caster wheel mounted exterior cabinet is made of steel sheet duly powder coated • inner chamber and trays are made of stainless steel • front double walled door is provided with lock and key arrangement • door operated illumination lamps is fitted inside the chamber for easy visibility • fitted with microprocessor based digital temperature indicator - cum-controller to control the temperature from 5°c to 60°c ±0.5°c. • cfc free eco friendly compressor • capacity: 171 liters.

• Material: SS-304 grade
• Temperature: From 5°C to 60°C ±0.5°C.
• Model: ALABS-A54-010
• Categories: Incubators
• Capacity: 175ltrs. (Volume : 6.5Cuft)
• Inner Chamber Size: 505mm X 415mm X 830mm
• Power: 220/230 volts A.C

• Small size capacity up to 42 liters: 6 sides direct heating system
• Fast heat-up and temperature recovery: Air jacketed heating method
• Dual beam IR CO2 sensor: Natural humidification using water tray
• Door heater minimizes condensation: Microprocessor PID controller
• HEPA filtration of gas supply inlets: 2 channels Touch operating panel
• Round corners for easy cleaning: Alarm for low & high deviation of CO2
• Perforated shelves for natural air flows: Over heating protection device

This mini CO2 Incubator by Bionics Scientific is a reliable, contamination free small sized unit with capacity of 42 liters. This unit is especially designed for smaller laboratories and possesses many advanced features required by professionals to achieve precise results. This small CO2 incubator features 6 sides direct heating, fast heat-up and quick temperature recovery and minimized condensation by front door heater and frame heater. This unit furthermore, offers over heating protection; heating is automatically cut by safety thermostat in case of temperature control failure and excessive heating over set point.   Bionics Scientific is a leading Indian company that manufactures Mini CO2 Incubator systems with 42 liters of capacity and supplies all over India at very reasonable price. These small sized CO2 incubators are designed for IVF and Cell laboratories to meet requirements of small scale research applications. The above system is our standard model that comes in 42 liters capacity, which can also be customized further to meet individual needs.

• MODEL NO.: CO2 -80
• CO2 -170:  MAKE
•  BIO GENE:  Heating method 
•  Air-Jacket direct heating:  Temperature Alarm
•  For shut up temperature:  Temperature Range
•  Ambient +3ºC to 60ºC:  Temperature Uniformity
•  < +0.2ºC:  Temperature Control
•  < +0.1ºc  at 37ºC:  Sensor IR
•  CO2 Sensor:  Temperature Stability
•  +0.1ºC   at 37ºC:  Readability
•  0.1%:  Accuracy
•  + 0.1% :  Humidity range 
•  RH up to 97%:  Humidity Recovery 
•  ±5% :  Co2 Range 
•  0: 20% (air adjusting type) +/- 0.1% at 5% 
•  +/-0.1%:  Co2 Recovery 
•  ≤Calibration X 1.2min:  Humidifying Method 
•  Natural evaporation:  Cubage 
•  80/170 L  :  Recovery Time 
•  After 1 min door opening 5:  Shelves 
•  4(pcs.):  Display 
•  Digital LED Dual:  Electrical Requirements 
•  230V 50Hz 50/60Hz:  Input Power 
•  720W:  SIZE
•  80 Ltrs:  170 Ltrs

• Color: White
• Voltage: 220 V AC
• Frequency: 50 HZ
• Material: SS
• Model Name/Number: HF90
• Usage/Application: IVF Lab Research Lab
• Chamber Volume: 151 Litre
• Brand Name: HEAL FORCE - SMARTCELL CO2 INCUBATOR
• Number Of Shelves: 3 Shelves
• Temperature Range: 5 to 75 degree celsius
• Warranty: one year
• Accuracy: 0.5 -+
• Air Circulation: Available
• Alarm: Available
• Compressor: Not Available
• Cooling System: Not Available
• Display Type: Digital
• Door Type: Front Openable
• Humidity Range: Above 95%
• Inbuilt Timers: Available
• Meter Type: Digital
• No. Of Samples: Up to 151 Litre
• Resolution: +-0.5 
• Thermostat Sensitivity: TC Sensor
• With Door Lock: Available
• With Interior Light: Not Available
• Packaging Details: wooden box
• Heat Mode: Available
• I Deal In: New Only

Waiometra CO2 Incubator is based on the principle to maintain optimal temperature, humidity and carbon dioxide (CO2) and oxygen content of the atmosphere inside.   Features : CO2 is controlled by Microprocessor based Controller with IR sensor control.   Humidity range 95% RH. Interior chamber shall be made of Stainless Steel with 2 trays. Over temperature protection Controller. Double stage CO2 pressure regulator & CO2 Cylinder (Optional).

Model:  AGCI-151 (Deluxe Model) Features: Air-jacketed and direct heating type. Efficient humidity system. Programmable CO2 sensor “AUTO-START”. MICROPROCESSOR BASED PID TEMPERATURE INDICATOR CUM CONTROLLER for controlling the temperature from 5°C above ambient to 50°C with an accuracy of +0.1°C. Alarm for High/Low Temperature & CO2. Unique Door Heating to avoid Condensation. CO2 Concentration setting range : 0 to 20% with deviation +0.1%. Recovery time of CO2 concentration to 5% @37°C : Less than 3 minutes. CO2 concentration sensor : TCD (Thermal Conductivity Detector). Humidity : ≥95%. Water Reservoir Volume : 3 Ltrs. Interior Structure : 3 Standard shelves with a inner glass door. Supplied complete with CO2 gas cylinder (Cap: 9Ltrs) with regulator and all complete pipes. Power supply: 220V + 10%/50Hz. Interior Volume : 151 Ltrs  

Thermo Scientific Hera cell i series CO2 incubators are available in non corrosive stainless steel or 100% pure antimicrobial copper. Thermo Scientific Hera cell i CO2 incubators provide the ideal in vitro environment: clean, reliable and easy to use, protecting valuable samples while optimizing cell growth with fast recovery characteristics and convenient touch screen user interface.

The CO2 incubator is the ideal instruments for immunology, oncology genetics and bio engineering. It is widely applicable for research and production of microorganism, agricultural science pharmacology. FEATURES • Air jacker heater (water jacket heater can be choosed). •Colorful touch screen controller, temperature, CO2 concentration, humidity (option) and other parameters show visual. • The curves of temperature, humidity and CO2 concentration can be viewed.HEPA filter (option). • With 90°C moist heat decontamination function.(UV disinfection is optional). • IR sensor, real-time real measured of CO2 concentration. • In forced convection mode, the power of fan is adjustable. • It has outer door heating function to prevent produce condensation on theglass door. • Independent temperature-limiting protection system to avoid temperature out of control if temperature control system failure. • Professional CO2 pressure relief valve with 2 stage control and stablepressure.

We APS are manufacturers of CO2 incubators (Carbon Dioxide Incubators) in India since 1990. Our CO2 incubators are widely used in various applications that require ideal conditions for tissue culture and maximum security from contaminations. Beside that they are also used for day to day photosynthesis tests and other general laboratory applications. We specialize in both standard and customized models, specifically designed to meet the challenging demands of various scientists for individual and specialized research applications. Over a short period of time Weiber brand have been established as reliable exporters of CO2 incubators (Carbon Di Oxide Incubators) in India, catering to the vast markets in South East Asia, Middle East, Africa and Europe. Apart from that we are supplying our CO2 incubators (Carbon Di Oxide Incubators) in India , catering to a variety of customers ranging from Defense Installations, Research Laboratories, Educational Institutes and various R and D laboratories of leading national and multinational companies.   Salient Features Of Carbon Di Oxide Incubator:- Reliable. Aesthetically designed Energy Efficient Long life Low Maintenance Calibration And Protocol Documentation   Construction:- APS CO2 incubators (Carbon Di Oxide Incubators) are Triple walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated.. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our CO2 incubators (Carbon Di Oxide Incubators) The unit is provided with two doors, the inner door is made of thick plexi glass/float glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with cator wheels for easy movement inside the laboratory. The unit is provided with two stainless steel shelves. The triple walled back of our CO2 incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber.   Heating :- Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage.. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity. An energy efficient cooling unit is installed in our carbon dioxide Incubators to enable bio chemical demand studies at lower room temperatures. We use ISI marked high end CFC free compressors of Kirloskar/Tecumseh make, conforming to latest international standards and guidelines.   Carbon Dioxide/Air Flow: Carbon Dioxide gas can be injected inside the chamber of the incubator with the help of a nozzle provided at the bottom of the chamber which is connected to the carbon dioxide cylinder and a flow control valve to regulate the gas intake in the chamber.   Temperature Range / Temperature Sensitivity:- Temperature range of our standard bacteriological incubator models are 5◦C above ambient temperature to   80◦ c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers. Temperature inside our bacteriological incubators are controlled with a sensitivity of + 0.5° c or better.   Illumination: Our units are provided with door operated illumination system comprising of fluorescent lights.   Front Panel Note:- Front panel of our units comprises of on/off switches heating and mains indicator lamps, temperature controllers.   Temperature Control: Front panel of our units comprises of on/off switches heating, cooling and mains indicator lamps, temperature controllers and voltmeters.

Autoclaves, Ph Meters, waterbaths, Deep Freezers

biotechnology instruments, environmental instruments, scientific products

Kjeldahl Distillation Unit, de humidifier, Deep Freezer

Centrifuges, Bitumen Extractor, Test Sieves, Sieve Shakers

Pharmaceutical Materials, pcr workstations, pharmaceutical industry materials

Fermentor Bioreactor Temp Controller PID Microprocessor, edible oil products

led growth chamber, growth chamber, laboratory coolers