Chillers Dealers in Delhi

Dossier India are leading manufacturer, supplier, trader and Exporter of wide range of Meat Display Chiller. Its available in various size(length are 1330 mm, 1955 mm, 2600 mm, 3830 mm)

• Compressor Type: Semi Hermatic Scroll
• Cooling Capacity: 5TR to 30TR
• Type: Water Cooled
• Phase: Three Phase
• Country of Origin: Made in India
• Brand: CRESCENT
• Features: Easy installation, Low maintenance, Excellent performance, High durability.

• Voltage: 380V-3N-50HZ
• Condition: New
• Warranty: 1 Year
• Power: 1.1 KW
• Air Volume: 12000m3/h
• Dimension: 2200*1100*1600mm
• Voltage:: 400 V / 50 Hz / 3 Ph
• Capacity: 3000 Kcal/Hr to 150000 Kcal/Hr
• Use: Industrial

We are acknowledged as one of the prime Chilling Units Manufacturers in India. The capacity of the Chilling Units ranges from 0.2 Ton to 20 Ton with the option to have them in full SS 304 Grade. We also manufacture Water Chilling Units that range from 1 TR. to 40 TR meeting the requirements of the applications like laser chiller, medical chillers, process chiller, machine cooling, aquarium chiller etc. Additionally, the robust structure and configuration of the Industrial Chilling Units has attracted national as well as international clients. Some of the salient features of the Chilling Units are as mentioned below : Compact skid mounted water chiller system, ready to install.Water Chillers are fully automatic with tried & tested controls.Quick chilling is ensured with plate type or shell and tube evaporators.Our water chillers use energy saving with cycling fans and high efficiency fin tube air-cooled condensers with liberal sized fans.Water Chillers offer guaranteed cooling capacity at rated parameters. Increased Production The speed and accuracy of production will increase as you maintain a constant and proper cooling temperature in your equipment. A chiller will reduce the number of rejected parts while increasing the number of parts produced per hour. You may ask yourself: "Does my equipment shut down during summer months?" -- "Are there periods where our rejection rate increases?" A COOLING TOWER may provide adequate cooling during winter months, but fail during the hotter periods of the year. A water chiller will immediately eliminate this problem. Why a Chiller? for Equipment Protection -The most compelling reason for a chiller is the protection it provides to your valuable process equipment-- such as laser machines , spot welders, injection molding equipment, and other applications. A chiller commonly represents a small fraction of the cost of the processing equipment, yet it provides solid protection of your investment, 24 hours a day, 7 days a week for years and years to come. Sizing a Chiller Correctly Simple instructions to Assure Proper Cooling The importance of selecting a correctly sized Water chiller cannot be downplayed. An undersized Water chiller will always be a problem-- never able to properly cool the process equipment. An oversize chiller will never be able to run at it's most efficient level. Specify the correct size chiller and enjoy years of continuous, efficient service. If you would like help, feel free to give us a call. We do this all the time. To size a water chiller properly you first need to calculate the delta T ( deg C)between the inlet and outlet water (the change in temperature), and the rate of flow in liters per minute (LPM). Measuring the delta T requires a thermocouple or thermometer. Check the water temperature of the water inlet line and the water outlet line, and subtract the numbers to compute how much heat the equipment is adding to the water. To measure the flow rate of the water place a flow meter on the outlet line of your equipment. If one is not available, simply measure the time it takes for the outlet flow to fill a twenty Litre bucket, and then compute your Litre per minute (LPM) of flow. Now that you have these two figures you need to calculate how many kcals (kilo calories of heat Units) your equipment dissipates. Here is the formula: kcals/ hour = (the weight of water) LPM x Temperature Difference (delta T) Repeat this for all the equipment you have, and add up the total kcals. Now that you have the kcals, lets compute the total Tons of cooling you need from a chiller. 1 Ton of cooling is 3000 kcals/hour hence. Tons = (kcals/hr) / (12,000) This is the minimum size unit you should need. Please keep another 20-25 % margin for There may be other circumstances, like planning for expansion, that would lead you to buy a different size unit. For more information about the specific units, please contact us. Salient Features of Process Water Chiller Compact skid mounted water chiller system, ready to install.Water Chillers are fully automatic with tried & tested controls.Quick chilling is ensured with plate type or shell and tube evaporators.Our water chillers use energy saving with cycling fans and high efficiency fin tube aircooled condensers with liberal sized fans.Water Chillers offer Guaranteed cooling capacity at rated parameters. Applications of Industrial Air cooled Water Chiller Chemical / Pharmaceutical process water chilling.Plastic Process chiller for : Injection Molding, Blow Molding, (Mould Chiller) etc.Extruders, PVC Pipes, Woven Sacks, PP Film Lamination etc.Calendars (Plastic & Rubber) Water Chiller.Milk and Dairy / Pasteurising, Food Products.Lubricants / hydraulic Oil Cooling and Dewaxing of Oils.Plating, Anodizing and Induction heat treatment water chiller.Pulp and Paper Processing.Printing Ink / Paper Waxing cooling.Bleaching / Dyeing Industry water chiller.EDM Machine cooling.Concrete curing. GlazingComfort cooling.Laser coolingProcess water chilling. The Fine Quality Component Features : Hermetic / Semi hermetic sealed / screw compressors with internal over load protection.Air cooled condenser with copper tubes and Aluminum fins.Plate type / shell and tube evaporator for high efficiency.Stainless Steel storage tank with external insulation to prevent moisture ingress and condensation.Refrigerant circuit consists of reputed filter dryer, thermostatic expansion valve / capillary, sight glass, accumulator. and other controls from Danfos /Sporlan / AlcoControls with safety devices - high and low refrigerant switches, low water level, flow switch.All Refrigerant tubing is high grade copper.Digital temperature indicator controller for precise temperature controlling.Audio visual indication for controls and safeties.Pumps suitable for high flow and pressure.Trolley mounting- optional. Air-cooled Water Chillers

22Tr water cooled chilling plant double ckt

• Country of Origin: India
• Certification: CE Certified, ISO 9001:2008
• Application: Industrial
• Weight: 100-1000kg
• Feature: Durable, Easy To Use, Effective, High Demand
• Voltage: 220V
• Condition: New
• Finishing: Polished
• Automatic Grade: Automatic
• Power: 1-3kw
• Brand Name: Active
• Power: 10 kW
• Ambient Temperature: Up to 480 Degree Celsius
• Cooling Capacity: 100 TR

• Brand Name: Advance Plus
• Type: Chiller
• Place Of Origin: Delhi  
• Condition: New, Good
• Product Type: Coolant Chiller

Coolant chiller is designed to work in extremely harsh environment conditions without any lubricating. In order to attain complete client satisfaction, we make sure that the offered lot is prepared using the best quality material. For this, we have tied-up with the leading names who assure us for the quality. A capacious warehouse and well-organized Warehouse Management System helps us in loading and unloading of all the products within a short time. We keep our inventory updated by recording warehouse transactions and delivery of goods.

• Thickness: 0.6 mm, 0.7 mm
• Power Consumption: 380 V
• Voltage: 220 V
• Capacity: 100-400 L/hr
• Maximum Working Pressure: 3 MPa
• Max. Pressure: 10 Bar

• Condition: New
• Size: Large
• Phase: Three Phase
• Grade: Automatic
• Capacity: 2TR to 1800TR
• Body Material: Mild Steel

Industrial Chillers are designed using sealed and scroll compressors sourced from danfoss and Copeland. These are available with multiple scroll compressors equipped in one machine. These are manufactured with special alloys like steel, worked on ultra lower temperature applications. They include separate and individual refrigeration circuits. Fabricated with a microprocessor that is suitable for process cooling applications ranging from (+) 20°c up to (-) 5°c and for lower temperatures of up to (-) 50°c. These equipments are used with CFC free refrigerants such as r-407c and r-134a. Beside this, it is available with in-built process pump and stainless steel chilled water expansion tank rated for an ambient temperature of (+) 50°c. It is available in twelve months guarantee and backed by most efficient customer support.Features Low input KW/TR Ergonomic design Robust construction High quality product CFC free refrigerants PLC for auto operation State-of-art technology Fully automatic functioning Meets international standards Air/water cooled skid mounted unit Capacity ranges from 1 TR to 120 TR Increased service life due to liquid injection Designed as per TElvlA/ ASME/ SEC VIII, DM, 2001 Comprises expansion valve, I.p/ H.r switch, dryer Brine/Water temperature ranges from (+) 20°C to (-) 5°C Equipped with MCS Microprocessor/ PLC based/ Electrochemica

• Size/Dimension: Medium
• Capacity: 20 Ton
• I Deal In: New Only
• Brand: Advance international
• Power: Electric