Civil Engineering Test Equipment Dealers in Chanakya Place, Delhi

• Features: Reliable ,Efficient, User friendly

The unit is supplied complete with a stainless steel penetration test cone 35 mm long with a smooth polished surface and an angle of 30°. Facility exists for adjusting cone height in relation to the specimen. Cone Penetrometer consists of one each of the following : Penetration Test Cone Penetration Test Cup, 55 mm dia x 40 mm deep

• Warranty: 1 Year warranty
• Automation Grade: Automatic
• Color: Blue
• Features: Latest finish , Light weighted.
• Usage/Application: Chemical Industry
• Language: English

• Country of Origin: India
• Material: Stainless Steel
• Certification: ISI Certified
• Color: Blue
• Finishing: Polished
• Warranty: 1 Year

For determination the workability of concrete provided the nominal maximum size of the aggregate does not exceed 38 mm. This is designed primarily for use in the laboratory but in suitable circumstances, it may also be used in the field. This test is more precise and sensitive and is particularly useful to concrete mixes of very low workability such as are normally used when concrete is to be compacted by vibration. Consists of two hoppers and a cylinder mounted on a rigid frame. The inside surfaces are machined smooth. The whole apparatus is furnished in hammertone spray. Complete with two trowels and a tamping  rod.

SAT-1302 is suitable for all kinds of sealing tape, sealing tape, warning tape, carpet tape, electrical tape, protective film tape, wrapping tape, cutting tape, etc., as well as medical patches, adhesive labels, protection Film and other products, hold the stickiness test.

Portable Falling Weight Deflectometer   Loadman-II    This is a light portable device for the measurement of Deflections. The device is easy to handle and can be used on all construction sites and all materials under any condition. It makes possible to measure bearing capacity and compaction ratio of construction layers and constructions in places where other measuring devices cannot be used owing to their size or because of the necessity to use a lorry or a van as a weight and or transportation unit. LOADMAN is also provided with an internal memory and with a keyboard. The data can be transferred to PC via USB connection.   Measuring principle   The deflection caused by the load of a falling weight is measured by an accelerometer. The acceleration is double integrated and thus the deflection can be calculated. The measuring results are given as the maximum deflection, the calculated bearing capacity modulus E, the length of the loading impulse and the percentage (approx.) of the rebound deflection compared to the maximum deflection as well as the compaction ratio, that is the ratio of the second and further on deflections compared to the first measured deflection (effectiveness of compaction).   Range of use Technically the device can be used on practically all kinds of construction sites to measure bearing capacity and for compaction control on bound, unbound, and special layers; for example, on roads, streets, bridge sites, house building sites, in trenches, on sports fields (football, baseball, tennis, golf, athletics etc.) as well as for laboratory tests of various kinds of materials.   Specificatons Total weight: 16 kg Height:117 cm Diameter: 13 cm Diameter of loading plate(s): 132 mm, 200 mm and 300 mm (option) Falling weight: 10 kg Falling height: 80 cm Operating voltage: 27 V (3 × 9V batteries) Measuring range: 0.1-5 mm approx. Length of loading/unloading impulse: 25-30 ms approx.

Soil testing instruments, This is specially useful to obtain reliable and accurate results of those soil which have low plasticity index. The percentage moisture contents determined when cone with half angle for 15-30 minutes under a total sliding weight of 148 gm penetrates 25mm gives the liquid limit

We are offering concrete test hammer. The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The greater the resistance of the concrete, greater is the rebounded impact.

pile integrity tester, Rebound Hammer, rebar detector, analyzer

quality control instruments cone penetrometer, Material Testing Equipments

Falling Weight Deflectometer, Solar Road Safety Products, Axle Load Services

Forced Convection Apparatus, Pin Fin Apparatus

pile integrity tester, Bond Testers, High Strain Dynamic Pile Load Tester

PIL7 Point Load Tester, PR 20 Pneumatic Pressure Indicator

Cement Testing Equipment, Soil Testing Equipment

Construction Testing Equipment