Civil Engineering Test Equipment Dealers in Gulabi Bagh, Delhi

Obromax fume hood are to limit a person's exposure to hazardous andor unpleasant fumes. For worker protection, the laboratory fume hood is the most useful piece of safety equipment found in the lab. When used appropriately, fume hoods not only provide protection from toxic gases and vapors but also provide protection from unanticipated fires and explosions. Fabricated out of thick wooden board these are designed . Outer is finished with sunmica and inner epoxy painted. Working table top is fitted with acidalkali resistant tiles stainless steel and a small wash basin with connections provided for inlet and out let of water. The front door moves vertically up and down with concealed counter balanced weight. The unit if fitted with flourescent light and a gas cock for gasair supply. The space under the work station can be provided with storage compartments for storage purpose. The front facing panel is fitted with 155 amp socket with switches for exhaust system and fluorescent light. To work on 220230 volts a.c. Supply. Working size- 2’x2’x2’ 3’x2’x2’ 4’x2’x2’ 6’x2’x2’

• Power: 0.75 Kw
• Brand Name: Steco
• Automation Grade: Semi-Automatic
• Phase: Single Phase
• Material: Mild Steel
• Voltage: 220 V

KEWIL Ring and Ball Apparatus Ring and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc.

Marshall Stability Test Apparatus is a very important bitumen testing equipments genrally highly demanded by construction industry. The apparatus is suitable for conducting Marshall stability test of bituminous mixture. The apparatus can truly judge the fail point of bituminous mixtures to design the match ratio or check the construction quality of bitumen road surface.

Used for uniform stirring of samples. The unit is provided with speed regulator for variable speed, S.S. Stirring shafts with adjustable height, S.S. propeller, and tube light is provided at base for illumination. Six Test Set, for 1 lit capacity.

Loading Unit, maximum capacity 20 kg/cm2 consisting of a loading yoke connected to a lever arm with a counter- balancing adjustment and having a lever ratio of 1:10, the whole assembly being mounted on a steel frame stand. ·         Consolidation cell assembly, fixed ring type for testing 60 mm dia x 20 mm thick specimens comprising: ·         Fixed ring for specimens 60 mm dia x 20 mm thick with a guide ring. ·         Top porous stone for 60 mm dia specimen. ·         Bottom porous stone for 60 mm dia specimen. ·         Pressure pad, perforated ·         Channeled base with water inlet. ·         Gasket. ·         Flanged water jacket, ·         Set of weights to give a pressure of 10 kg/cm2 on 60 mm specimen. Comprising: 7 off 0.05 kg/cm2, 5 off 0.1 kg/cm2, 6 off 0.2 kg/cm2, 6 off 0.5 kg/cm2, and 5 off 1.0 kg/cm2. ·         Water reservoir with plastic tube, T-connection and pinch cock. ·         Dial gauge, 0.01 mm x 25 mm travel

• Type: Bitumen Testing Machine
• Certification: Iso 9001:2008
• Weight: 100-500kg
• Voltage: 110V, 220V, 380V
• Condition: New
• Automatic Grade: Automatic
• Power: 3-5kw, 5-7kw
• Driven Type: Electric
• Warrenty: 1 Year

Consists of a torque head adjustable in height by means of a lead screw rotated by a drive wheel to enable the vane to be lowered into the specimen. Rotation of the vane is by means of an electrically operated rate of rotating is 1/60 R.P.M. Suitable for operation on 230 V A.C. Single Phase which operates a worm gear arrangement turning the upper end of a calibration torsion spring, vane dia, rod dia, vane size & vane height are as per IS specifications. The vane shaft is attached through the hollow upper shaft to a resettable pointer, which indicates the angle indicates the angle of torque on a dial graduated in degree the dial reading multiplied by spring factor gives the torque a container for soil sample is also supplied & a sampling tube of 38mm. i.d. & 150mm long can also be used as container . Supplied with set of four springs, one each of approx. 2 kgs/cm2, 4kgs/cm2, 6 kgs/cm2 & 8kgs/cm2 complete as above in a wooden carrying case

Flocculator has been specially designed for use in water treatment plants to correctly estimate the dosing of alum and such other coagulants for treatment of water and sewage. In provides indentical test conditionsfor all samples. Illuminated base consists of fluorescent tube mounted below translucent plastic plate to provide diffused cold light through floc sample. Flocculator consists of geared continuous run heavy duty 1/20 H.P. variable speed motor from 10 to 100 RPM with built in speed control. S.S. stirring rods are provided with adjustable spacer s to adjust the depth of stirring paddles. The stirring shaft can be removed without disturbing other stirrers. This unit is supplied without beakers to work on 220/230 volts A.C.

• Power: 230 V ± 10%, 50 Hz.
• Optional: IQ, OQ & PQ documents

Friability testers often called friabilators for accurate friability determination of compressed and uncoated tablets. These instruments are available with 1 or 2 drums as required. Confirming to specifications of USP, BP and EP, our friability testers offer reliable results, while providing you ease of operation through advanced designing and configuration of the machine. Our friability Tester offers many user-friendly features essential for fast working and accurate testing all the time; automatic pre-set count stop, audible alarms for user alert, a provision to connect dot matrix printer and digital weighing balance, in-built self validation program (printout can be take of validation report). The instrument is easy to use and maintain.

An Internal Network Penetration Test examines internal IT systems, like Internal Servers, Firewalls, Routers, etc for any security weakness that could be used to disrupt the confidentiality, availability or integrity of the network, thereby allowing the organisation to address each weaknesses. In an Internal Network Penetration Test, our testers will act as an internal member of the organization to mimic the actions of an attacker exploiting weaknesses in network security from the intenal side. At the end, you get a comprehensive list of all security vulnerabilities on your internal infrastructure.

• Voltage: 220 V
• Surface Treatment: Paint Coated
• Usage/Application: Industrial
• Material: Mild Steel
• Frequency: 50Hz
• Operating Mode: Semi Automatic
• Display Type: Digital
• Capacity: 30 KN

We specialize in manufacturing, supplying and exporting Fume Hood. We deal in Floor Mounted Fume Hood worldwide. Our innovative range of Fume Hood is aerodynamically designed considering the most efficient automatic bypass airflow to the suction system. Double walled construction of Fume Hood provides easy maintenance and access to concealed service fixtures and utilities like water, gas, vacuum and electricity connections. Outer body of our Fume Hood is made from C.R.C.A sheets (cold rolled case annealed low carbon steel sheets) or industrial grade wooden board laminated with thick laminate and provides rigidity and better protection from chemicals fumes.

• Features: Rugged construction, Easy to use, Compact design, High functionality, Longer functional life, Durable .
• Weight: 3.5kg
• Speed: 36 rpm
• Load Capacity: 9 tubes
• Motor Type: sryrinconised
• Brand Name: pacific

• Usage/Application: Unconfined Compression Strength of soil samples
• Capacity: 50 kN
• Dial Gauge: 0.01 x 25mm

We are the manufacturers, exporters and supplier of this products.

• Model: Working Sizes
• AGFH-322: 3' X 2' X 2'
• AGFH-422: 4' X 2' X 2'
• AGFH-622: 6' X 2' X 2'
• AGFH-532: 5' X 3' X 2'

features: fabricated out of thick wooden board. these are designed so as to throw-out all toxic/harmful vapors, thus protecting costly instruments and the person working in the lab. outer is finished with sunmica and inner epoxy painted. working table top is made of stainless steel and a small wash basin with connections provided for inlet and outlet of water. the front door moves vertically up and down with concealed counter balanced weight. the unit is fitted with fluorescent light and a gas cock for gas/air supply. the front facing panel is fitted with 15/5 amp socket with switches for exhaust system and fluorescent light. to work on 220 / 230 volts a.c. Supply.   optional accessories: fc mounting base with storage space and door.   working table top with(ss.316) in lieu of ss 304 grade lead lining on work walls for use as radio-isotope fume hood fume duct per running feet. 

Split Tube Sampler or Split Spoon Sampler is designed to take undisturbed soil samples using the drive weight method as per BS 1377. The split tube section is held together with a ball check valve head and a heat treated drive shoe.

soil testing instrument, Aggregate Stones, Testing Instrument

Cement Testing Equipment, Food Processing Equipments

Bitumen Testing Instruments, water bath ovens, laboratory instrument

Cement Testing Equipment, Soil Testing Equipment, Concrete Testing Equipment

Soil Testing Instruments, Laboratory Instruments, cement testing instruments

Soil Testing Equipment, Cement Testing Equipment, Concrete Testing Equipment

soil testing equipments, Cork & Corks Products, Biology Lab Equipments

Fume Hood, Laminar Air Flow, Kjeldahl Distillation Unit, Ice Flaking Machine

soil testing equipments, Compression Testing Machines