Civil Engineering Test Equipment Dealers in Inderlok, Delhi

We are one of the prominent direct shear machine manufacturers, exporters, and suppliers, based in india. The direct shear test is carried out with an apparatus consisting of a square divided into two halves. The specimen, contained in the box, is subjected to a constant normal load while an increasing horizontal force is applied to one of the section of the shear box. This force causes a shear failure along the junction between the box sections. The shear force and the normal load are measured directly. The rate of strain is adjusted by the speed of the horizontal force applied. The loading unit has v-strips on which the shear box housing rests. Our direct shear machine is suitable for specimens of size 60 x 60 x 25mm. ref. Standard is:2720 (part 13), bs 1377, astmd 3080 ordering information concrete permeability apparatus, 3 cell model for 100mm cubeconcrete permeability apparatus, 3cell model for 100mm cylinberconcrete permeability apparatus, 3cell model for 150mm cubeconcrete permeability apparatus, I cell model for 150mm cubeconcrete permeability apparatus, 3cell model for 300mm cylinberconcrete impermeability apparatus, 3cell model for 150mm cube as per dlnstd to enquire about the desired product(s), just check the box and then click inquiry now button which is provided below.

• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

Marshall Stability Test Apparatus is utilized for designing and evaluating bituminous paving mixes. The test is carried out as a routine test program for paving jobs. The test is applicable to hot mix designs that use bitumen and aggregates up to a maximum size of 25mm. Our Marshall Stability Test Apparatus consists of a motorized loading unit with two telescopic pillars and an adjustable cross head. Limit switches are also installed inside in order to control the upward or downward movement of the pillars. The two majors features of Marshall Stability Test Apparatus are density voids analysis and stability. The marshal stability of a particular mix is defined as a maximum load carried by a compacted specimen at a standard test temperature of 60oC.

• Weight: 10-20kg
• Voltage: 110V
• Application: Industrial, Household, Laboratory
• Power: 100W
• Driven Type: Battery
• Quality: Premium
• Dia.: Brass ball 25 mm
• Size: 38 x 38 x 3 mm
• Model: PHY-0074

We believe in keeping transparency in the transactions and thus we offer an invoice to the clients stating all the necessary details. We undertake both online and offline payment processing methods. We are the most promising name when it comes to Softening Point Apparatus. Features Precision engineered High productivity Smooth operation

For correct compressive strength of concrete cylinders, the end surfaces of the specimen must be truly flat. If they are not, using capping compound and a capper, the faces are plastered flat. Capping set can be used for cylindrical specimen likeconcrete cylinders of cores. They can be used in Laboratory or in field.

We manufacture superior quality Slump Test Apparatus conforming to BIS �7320. The apparatus is widely used for the determination of workability of concrete where nominal size of aggregate does not exceed 38 mm. It finds applications in various industrial tests. Slump Test Apparatus is designed with precision to offer the maximum efficiency and high performance speed. We design our Slump Test Apparatus to cater to the varied specifications of the clients. Features The apparatus comprises of a slump cone with foot pieces fitted on a base with wing bolts.A swivel carrying handle fitted with the base also serves as a datum for measuring the slump, when moved into vertical position perpendicular to the base.A graduated tamping rod is used both for compressing the specimen as well as measuring the slump of concrete.The slump cone is filled with freshly mixed concrete and is tamped with a tamping bar in three or four layers. Working The top of the concrete is leveled off with the top of the slump cone, the cone is lifted vertically up and the slump of the sample is immediately measured.

• Flow rate of RO water: ≥1.5L/min
• Flow rate of UP water: 12 L/Hour
• Resistivity: 10-16MΩ-cm
• Fuse: 1 No. 100 MA
• Power consumption - Drive: 6 watts
• Stirring Plate: 130 mm dia.
• Power supply: 50 Hz., 230 ± 10% Volt AC

• Finishing: Color Coated
• Material: Mild Steel
• Automation Grade: Manual
• Color: Blue
• Country of Origin: Made in India
• Usage/Application: Soil Testing
• Brand Name: Sisco India

Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia. Specification:- The complete set consists of one each : Glass plate 20cm x 15cm having round ends Brass or stainless steel rod 3mm dia x 150mm long Flexible spatula 15 cm Set of 6 moisture containers Porcelain basin 150mm dia  Plastic wash bottle 500ml Note:- Glass Plate size 500 x 500 x 10mm can be supplied at an extra cost.

• Certification: CE Certified
• Color: Brown, Grey, Light White
• Voltage: 220V
• Driven Type: Electric
• Warranty: 1year, 2years, 3years
• Application: Soil Testing

This apparatus is used for the in place determination of the dry density of compact, line and medium grained soils and for layers not exceeding 500mm thickness. The complete apparatus consists one each of Small sand pouring cylinder, 3 litre capacity fitted with conical funnel and shutter. Cylinder calibrating container, internal dia 100mm and 150mm height. Accessories: Metal tray, 300mm square and 40mm deep with hole.

Like Standard Penetrometer we also master in making Automatic Standard Penetrometer. We Manufacturer Automatic Standard Penetrometer with transistorized timer and Electro magnet incorporated in the clutch mechanism to accurately control penetration time to exact five seconds

A concrete structure is considered to be of adequate durability if it performs in accordance with its intended level of functionality and serviceability over an expected or predicted life cycle. Concrete durability depends largely on the ease (or difficulty) with which fluids (water, carbon dioxide, oxygen) in the form of liquid or gas can migrate through the hardened concrete mass. Concrete is a porous material. Therefore, moisture movement can occur by flow, diffusion, or sorption. We are concerned with all three, but generally the overall potential for moisture in concrete by these three modes is referred to as its permeability. The set up consist of permeability cell, water reservoir and pressure lines, with glass bottles. Consists of a metal cylinder with a ledge at the bottom for retaining the specimen, a flange at the top, removable cover plate and a funnel. A rubber gasket is seated in matching grooves, between the cell and the cover plate, to render the joint water tight. Internal working size of the cell will be 100mm dia X 100mm height. Consists of a length of metal pipe, 50 to 100 mm in diameter and about 500 mm long. The reservoir fitted with a graduated side arm gauge-glass for admitting water and compressed air and a cock for drainage, bleeding and connection to the permeability cell. Heavy duty armored rubber hose with end fittings. Complete with glass bottles but without compressor. For specimen size 100 X 100 mm Concrete permeability tester for three specimen of (100mm dia x 100mm height) or (150mm dia x 150mm height) or (150mm cube) is also available. Relevant Standard: IS: 3085

• Material: Mild Steel
• Impact Energy: 0.833 Nm (0.614 lbf)
• Weight: 3.45 kg (7.60 lb)
• Brand: Proceq
• Hammer mass: 665 g (1.47 lb)
• Hammer head diameter: 8.0 mm (0.315")
• Operating temperature: -10 to 50 Deg C
• Dimensions of housing: 230 x 60 x 200 mm
• Measuring range: 145 psi -725 psi
• Model Number: OS-120

• Used For: determining the slumps of fine aggregate in the determination of bulk and apparent specific gravity and absorptionof fine aggregate.
• Model: ASI-541
• Dimension: 1.5inch dia. at the top, 3.5 inch dia. at the base and 2.7/8 inch in height.

We are recognized in the global market as one of a prominent Flexure Testing Machine Manufacturers, based in India. Using premium grade components, we have developed Flexure Testing Machine, which is ideal for testing mortar samples for flexural strength. We offer Flexure Testing Machine at the most discounted price in the Industry. Features : Rugged constructionPerfectly measures loadAptly transmits the applied loadTrouble free operationLow maintenanceCompetitive pricing Applications : Pharmaceutical IndustryResearch InstitutionsChemical Industry Flexure Testing Machine 100 KN For 100 x 100 x 500 mm & 150 x 150 x 700 mm Beam : Hand OperatedElectrically Operated

• Automation Grade: Manual
• Material: Aluminium
• Application: Soil Testing
• Color: Black
• Finishing: Powder Coating
• Weight: 1.800kg

Cone Penetrometer is used for finding the limit limit of soil whose plastic index is low. it is as per IS Standard. it is consist of frame with graduated scale at the front, the cone is fitted at the bottom of the rod which pass through the scale., one brass container of 50mm dia the whole unit is packed in cardboard box.

• Voltage: 220 V
• Surface Treatment: Paint Coated
• Usage/Application: Industrial
• Material: Mild Steel
• Frequency: 50Hz
• Operating Mode: Semi Automatic
• Display Type: Digital
• Capacity: 30 KN

• Material: Stainless Steel
• Country of Origin: Made in India
• Brand Name: Unique
• Automation Grade: Manual
• Usage/Application: Testing
• Finishing: Powder Coated
• Dimension: 400 (L) x 136 (W) mm

GLOW WIRE TEST APPARATUS  is intended for testing the flammability and ignitability of components and materials. This equipment is designed as per requirement of IEC:60695-2-10, IEC:60950-1, IEC:60335-1, IEC:60884-1, IEC:60238, IEC:60695-2-11, IEC:60695-2-12, IEC:60745-1, IEC:60400, IEC 60730-1, IEC:60598-1, IEC:61050, IEC:60320-1, IEC:61058-1, IEC:60742, IEC:60669-1, UL 746A, BS EN 60695-2-1, BS 6458, NF C20-921-1, IS:11000, ASTM D 6194-03 ‘Fire” hazard testing- part – 2 test method section 1, Glow wire test and Guidance.Nickel / Chromium (80: 20) Glow Wire, 4 m.m. in diameter, as per standard. Apparatus Glow Wire Test Apparatus consists of fine wire thermocouple, 0.5 mm diameter Cr/Al OR 1.0 mm Sensing Thermocouple. Sensing Thermocouple is also being supplied as per ASTM D 6194 for measuring the temperature of the Glow Wire. The equipment is simulated thermal stresses that are produced by sources of heat or ignition for short periods. When insulation is subjected to abnormal condition & can become a fire hazard. Fully Automatic Glow Wire Tester Besides the Conventional Glow Wire Test Apparatus a new model with complete automated Glow Wire Tester having touch screen and complete PLC control and monitoring for Time, Flame time, Force, Current and Exhaust time etc is also designed by Sensors India. The testing device consists of a loop of resistance wire, electrically heated to the for high temperature specified for the relevant standards and maintained under specified pressure & time. A PID digital temperature indicator with controller. The range of this control is 1000 Deg C. An auto current source use also provided with a CT operated ammeter, which is capable of delivering up to 150A for heating in loop. Besides that moving specimen holder trolley is pre-loaded with a force of 0.8 to 1.2 N against Glow Wire. Mechanical stopper limits movement of the tip of The Glow Wire in to the specimen to maximum permitted with scale to measure penetration depth. Digital timer for application and flame time adjustable clamp for holding the specimen under test & Scale for measuring flame height is also provided. Our apparatus provides excellent temperature control.

Digital Concrete Test Hammer, Material Testing Equipments

soil testing instrument, Aggregate Stones, Cement, Testing Instrument

automatic soil compactor, Digital Humidity Indicators / Controllers

concrete permeability test equipment, compressor testing machine

Soil Testing Equipment, Concrete Testing Equipment, Cement Testing Equipment