Civil Engineering Test Equipment Dealers in Karampura, Delhi

• Integral type proving Ring capacity: 3000Kgs
• A dial gauge: 0.01 x 25mm.

Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.

Automatic Digital Bitumen Penetrometer-VSLIC4038 The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free guidance of the plunger which virtually eliminates friction during the test.Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, the needle position can be finely adjusted by using the joystick located on the front panel. A magnifying glass and an ultra- bright LED lamp are supplied to assist the operator; the plunger is then automatically released onto the sample and raised automatically after the testing period. The test result is displayed on the digital display. The plunger can easily be removed to calibrate its weight.A water bath and a thermometer (IP38, ASTM 17C or 63C) required for the test are ordered separately. The Automatic Electronic Penetrometer is supplied complete with;Penetration Needle, 1 pieceTransfer DishSample Cup, Ø 55×35 mm, 6 pieces, stainless steel Technical Specifications Measuring Range: 0-50 mm Resolution: 0.01 mm Test Load: 100 g (plunger 97.5 g + 2.5 g penetration needle) Test Time: 5 seconds (adjustable from 0.1 to 9999 sec.) Dimensions: 270x480x750 mm Weight (approx.): 24 kg Power: 75 W Automatic Digital Bitumen PenetrometerAutomatic Electronic Penetrometer is used for determination of the needle penetration according Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, Automatic Digital Bitumen Penetrometer Summary The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free guidance of the plunger which virtually eliminates friction during the test.

• Material: Mild Steel
• Impact Energy: 0.833 Nm (0.614 lbf)
• Weight: 3.45 kg (7.60 lb)
• Brand: Proceq
• Hammer mass: 665 g (1.47 lb)
• Hammer head diameter: 8.0 mm (0.315")
• Operating temperature: -10 to 50 Deg C
• Dimensions of housing: 230 x 60 x 200 mm
• Measuring range: 145 psi -725 psi
• Model Number: OS-120

• Used For: determining the slumps of fine aggregate in the determination of bulk and apparent specific gravity and absorptionof fine aggregate.
• Model: ASI-541
• Dimension: 1.5inch dia. at the top, 3.5 inch dia. at the base and 2.7/8 inch in height.

• Dimension: 300mmx320mmx425mm, 320mmx325mmx450mm
• Material: Metal
• Color: Metallic, Silver
• Application: Industrial
• Surface Finshing: Polished
• Resistivity: Rust Resistant

We are a reputed firm engaged in manufacturing and supplying excellent quality Slump Test Apparatus. Slump Test Apparatus is used for determining the consistency of freshly mixed concrete, where the maximum size of the aggregate does not exceed 38mm. The Slump Test Apparatus is designed in the shape of the frustum of a cone, open at both ends. Further, it is applauded for its high reliability, efficiency and durability. Consists of slump cone fitted with handles and foot pieces in position. Base plate in octagonal shape, Two clamps slide over the foot grips of a standard slump cone and hold It securely while filling and rodding. A combination swivel carrying handle. Complete with graduated tamping rod 0-60 cms long and 16 cms long and 16 mm dia with 0-30 cms.

• Weight: 10-20kg
• Voltage: 110V
• Application: Industrial, Household, Laboratory
• Power: 100W
• Driven Type: Battery
• Quality: Premium
• Dia.: Brass ball 25 mm
• Size: 38 x 38 x 3 mm
• Model: PHY-0074

We believe in keeping transparency in the transactions and thus we offer an invoice to the clients stating all the necessary details. We undertake both online and offline payment processing methods. We are the most promising name when it comes to Softening Point Apparatus. Features Precision engineered High productivity Smooth operation

The CBR method is used for finding the relative bearing ratio and expansion characteristics of soil of base, sub-base and sub-grade for the design of roads, pavements and runways. It meets the requirements of BIS-2720 Part XVI and consists of Load frame. Our California Bearing Ratio Test Apparatus is designed with precision keeping in mind the needs of the clients, and are widely used for laboratories activities. The California Bearing Ratio Test Apparatus is made using high quality raw material, and is incorporated with many advantageous features. We make available California Bearing Ratio Test Apparatus with different speeds, and cater to the needs of the clients. Features Precision engineeredCustom manufacturedHigh performance rateHigh speed Available in Three speedSix speedTwelve speedThirty speed Specifications Hand operated Capacity 5000 kg.One CBR Mould 150 mm diameter and 175 mm high complete with base plate and collar 150 mm diameter and 50 mm high.One penetration Piston faces 50 mm diameter. Bracket.Displacer Block 148 mm diameter and 47.7 mm long.Surcharge Weight 5 kg and 2.5 kg with central hole and also slotted. Tripod Cutting collar.Proving ring, capacity 1000 kg.One diameterl gauge with least count .01 mm.California Bearing Ratio Apparatus Motorized Complete as above, but supplied with a motorized load frame with rates of travel of lead screw 0.025 mm/min.; 0.05 mm/min.; 0.0625 mm/min.; 0.125 mm/min.; 0.25 mm/min.; 0.5 mm/min.; 0.625 mm/min.; and 1.25 mm/min.Available in-Hand Operated, three speed, six speed, twelve speed and thirty speed.

• Flow rate of RO water: ≥1.5L/min
• Flow rate of UP water: 12 L/Hour
• Resistivity: 10-16MΩ-cm
• Fuse: 1 No. 100 MA
• Power consumption - Drive: 6 watts
• Stirring Plate: 130 mm dia.
• Power supply: 50 Hz., 230 ± 10% Volt AC

• Material: Mild Steel
• Weight: 5 Kg
• Brand Name: Unique
• Country of Origin: Made in India
• Usage/Application: Soil Testing
• Finishing: Powder Coated
• Automation Grade: Manual
•  :  

We are one of the prominent direct shear machine manufacturers, exporters, and suppliers, based in india. The direct shear test is carried out with an apparatus consisting of a square divided into two halves. The specimen, contained in the box, is subjected to a constant normal load while an increasing horizontal force is applied to one of the section of the shear box. This force causes a shear failure along the junction between the box sections. The shear force and the normal load are measured directly. The rate of strain is adjusted by the speed of the horizontal force applied. The loading unit has v-strips on which the shear box housing rests. Our direct shear machine is suitable for specimens of size 60 x 60 x 25mm. ref. Standard is:2720 (part 13), bs 1377, astmd 3080 ordering information concrete permeability apparatus, 3 cell model for 100mm cubeconcrete permeability apparatus, 3cell model for 100mm cylinberconcrete permeability apparatus, 3cell model for 150mm cubeconcrete permeability apparatus, I cell model for 150mm cubeconcrete permeability apparatus, 3cell model for 300mm cylinberconcrete impermeability apparatus, 3cell model for 150mm cube as per dlnstd to enquire about the desired product(s), just check the box and then click inquiry now button which is provided below.

It is used for determining the workability of concrete . Consist of slump cone 20cm bottom dia. & 10cm top dia. With handle, base plate & tamping rod 16mm dia. & 60cm long.

GLOW WIRE TEST APPARATUS  is intended for testing the flammability and ignitability of components and materials. This equipment is designed as per requirement of IEC:60695-2-10, IEC:60950-1, IEC:60335-1, IEC:60884-1, IEC:60238, IEC:60695-2-11, IEC:60695-2-12, IEC:60745-1, IEC:60400, IEC 60730-1, IEC:60598-1, IEC:61050, IEC:60320-1, IEC:61058-1, IEC:60742, IEC:60669-1, UL 746A, BS EN 60695-2-1, BS 6458, NF C20-921-1, IS:11000, ASTM D 6194-03 ‘Fire” hazard testing- part – 2 test method section 1, Glow wire test and Guidance.Nickel / Chromium (80: 20) Glow Wire, 4 m.m. in diameter, as per standard. Apparatus Glow Wire Test Apparatus consists of fine wire thermocouple, 0.5 mm diameter Cr/Al OR 1.0 mm Sensing Thermocouple. Sensing Thermocouple is also being supplied as per ASTM D 6194 for measuring the temperature of the Glow Wire. The equipment is simulated thermal stresses that are produced by sources of heat or ignition for short periods. When insulation is subjected to abnormal condition & can become a fire hazard. Fully Automatic Glow Wire Tester Besides the Conventional Glow Wire Test Apparatus a new model with complete automated Glow Wire Tester having touch screen and complete PLC control and monitoring for Time, Flame time, Force, Current and Exhaust time etc is also designed by Sensors India. The testing device consists of a loop of resistance wire, electrically heated to the for high temperature specified for the relevant standards and maintained under specified pressure & time. A PID digital temperature indicator with controller. The range of this control is 1000 Deg C. An auto current source use also provided with a CT operated ammeter, which is capable of delivering up to 150A for heating in loop. Besides that moving specimen holder trolley is pre-loaded with a force of 0.8 to 1.2 N against Glow Wire. Mechanical stopper limits movement of the tip of The Glow Wire in to the specimen to maximum permitted with scale to measure penetration depth. Digital timer for application and flame time adjustable clamp for holding the specimen under test & Scale for measuring flame height is also provided. Our apparatus provides excellent temperature control.

It consists of a vertical pillar mounted on a base, the head, together with diameter plunger rod and cone (or needle) slides on a pillar and can be clamped at any desired height. The dial is graduated in 400 110 and the millimeter subdivisions Supplied with a penetration needle, ring weights. and two sample containers

• Material: Alumnium
• Range: 10 TO 60 Robound Hammar
• Weight: 2-3kg
• Usage/Application: Concrete Testing
• Finishing: Anodizing Coated
• Resolution: 2 Rebound Number
• Packing Type: Wooden Box

The rebound of an elastic mass depends on the hardness of the surface against which its mass strikes. When the plunger of the rebound hammer is pressed against the surface of the concrete, the Spring-controlled mass rebounds and the extent of such a rebound depends upon the surface hardness of the concrete. The surface hardness and therefore the rebound is taken to be related to the compressive strength of the concrete. The rebound value is read from a graduated scale and is designated as the rebound number or rebound index. The compressive strength can be read directly from the graph provided on the body of the hammer.  

We are offering ultrasonic pulse velocity. Unbeatable pundit® lab features measurement performance; optimized pulse shaping, atomated transmission settings for optimum performance and a range of new, more powerful transducers ensure accurate, stable measurements. Integrated waveform display; allows analysis of the received signal and manual triggering directly on the instrument. On-line data acquisition; full remote control of all transmission parameters, data logging function and functionality that turns your pc into an oscilloscope. Usb interface and data analysis software; data analysis and export to third party programs. Open interface; control pundit lab using third party software such as lab view. new features in pundit® lab+ integrated gain stage; removes the need for an external amplifier when using exponential transducers and long cables. Compressive strength measurement; conversion curves for strength estimation can be created in the software and uploaded to the instrument to give instant strength estimations on site. 1combined estimates with rebound hammer; sonreb curves may also be uploaded onto the instrument for improved compressive strength estimates in combination with rebound hammer measurements. Time stamp; a real time clock has been integrated to provide a time stamp to every measurement recorded. Review list; saved measurements may be reviewed directly on site without the need for a pc connection. an extended range of transducers a complete range from 24 khz up to 500 khz for various applications including: • improved 54khz and 150khz transducers; a new design with improved performance to increase range and stability. • improved 54khz exponential transducers; a new design with improved performance. When used in combination with pundit lab+ no external amplifier is required. • 250khz shear wave transducers; for use in combination with standard p-wave transducers to measure the dynamic elastic modulus of the material under test.

Digital Concrete Test Hammer, Material Testing Equipments

We are counted amidst the celebrated suppliers of Cement Testing Equipment and known for offering the best deals. Based in Rudrapur(India), We marked our presence in the nationwide market since our products are qualitative and cost effective.

Scientific Instruments, vane shear test equipment, load frame apparatus

Concrete Permeability Apparatus, automatic soil compactor

soil testing equipments