Civil Engineering Test Equipment Dealers in Kirti Nagar, Delhi

Located in Delhi, India, we are actively functioning as a proficient Manufacturer, Exporter and Supplier of Slump Cone Apparatus all over the globe. The Slump Cone Apparatus is comprehensively used to calculate the workability of concrete. Our Slump Cone Apparatus is offered along with base plate & tamping rod, which is 16mm dia. & 60cm long. It comprises of Slump Cone of 20cm bottom dia. & 10cm top dia. Order retail or bulk, timely delivery is guaranteed!

The mould, which has 25mm x 25mmx 250mm. effective gauge length is made of mild steel and has accurately machined faces. The parts of the moulds are tight fitting and firmly held together when assembled. Supplied complete with base The mould is used for casting specimens of cement aggregate combinations fro measuring the potential expansive alkali reactivity.

Soil Permeability Apparatus come with glass tubes of 75mm, bore tube is provided with over flow arrangement for constant head tests. The remaining tubes are used for falling head test.

civil engineering material testing equipment

• Type: Lump Test Apparatus
• Certification: ISO 9001:2008
• Color: Grey
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1KV, 2KV
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 150-300mm

We are the main supplier of this product.

We are offering rebound hammer. key features: 1. high contrast oled display 2. all setup can be made on site 3. automatic calculating compressive strength 4. all data will be stored in memory 5. all data can be transferred to pc usb or blue tooth (optional) 6. dual display for analog ruler and digital value

We are offering asphalt testing equipment.

It is used for the determination of the softening point of bitumen. It consists of Two steel balls; each 9.5 mm in dia. Two Brass rings, tapered of brass. Ball Guide Two Ring Holder One Bath Beaker of heat resistant glass, Inner Dia. 8.5 cms and depth 12 cms approx. B2008B Ring & Ball Apparatus, electrically heating Similar to B2008, but supplied with a heating plate with an energy regulator which permits fine regulation of temperature. In addition, there is an electrically operated Stirrer mounted on a stand with chuck and glass rod or aluminium rod and for stirring the water in the water bath. Operation on 230 V, single phase, 50 cycles, A.C. supply.

GLOW WIRE TEST APPARATUS  is intended for testing the flammability and ignitability of components and materials. This equipment is designed as per requirement of IEC:60695-2-10, IEC:60950-1, IEC:60335-1, IEC:60884-1, IEC:60238, IEC:60695-2-11, IEC:60695-2-12, IEC:60745-1, IEC:60400, IEC 60730-1, IEC:60598-1, IEC:61050, IEC:60320-1, IEC:61058-1, IEC:60742, IEC:60669-1, UL 746A, BS EN 60695-2-1, BS 6458, NF C20-921-1, IS:11000, ASTM D 6194-03 ‘Fire” hazard testing- part – 2 test method section 1, Glow wire test and Guidance.Nickel / Chromium (80: 20) Glow Wire, 4 m.m. in diameter, as per standard. Apparatus Glow Wire Test Apparatus consists of fine wire thermocouple, 0.5 mm diameter Cr/Al OR 1.0 mm Sensing Thermocouple. Sensing Thermocouple is also being supplied as per ASTM D 6194 for measuring the temperature of the Glow Wire. The equipment is simulated thermal stresses that are produced by sources of heat or ignition for short periods. When insulation is subjected to abnormal condition & can become a fire hazard. Fully Automatic Glow Wire Tester Besides the Conventional Glow Wire Test Apparatus a new model with complete automated Glow Wire Tester having touch screen and complete PLC control and monitoring for Time, Flame time, Force, Current and Exhaust time etc is also designed by Sensors India. The testing device consists of a loop of resistance wire, electrically heated to the for high temperature specified for the relevant standards and maintained under specified pressure & time. A PID digital temperature indicator with controller. The range of this control is 1000 Deg C. An auto current source use also provided with a CT operated ammeter, which is capable of delivering up to 150A for heating in loop. Besides that moving specimen holder trolley is pre-loaded with a force of 0.8 to 1.2 N against Glow Wire. Mechanical stopper limits movement of the tip of The Glow Wire in to the specimen to maximum permitted with scale to measure penetration depth. Digital timer for application and flame time adjustable clamp for holding the specimen under test & Scale for measuring flame height is also provided. Our apparatus provides excellent temperature control.

• Standard impact energy: 2.207 J
• Pointer length: 20.0 ± 0. 2mm
• Friction of pointer: 0.65 ± 0. 15N
• Spherical radius of bouncing rod: 25±1.0mm

• Type: Digital Tester, Electric Tester, Tester, Wire Tester
• Certification: ISO 9001:2008 Certified
• Application: Control Panels, Industrial Use, Power Grade Use
• Color: Grey, Light Green, Sky Blue, White
• Condition: New, Used
• Frequency: 45Hz, 66Hz
• Automatic Grade: Automatic
• Power Source: Battery, Electric
• Feature: Easy To Use, Electrical Porcelain, Four Times Stronger, Proper Working, Superior Finish, Water Proof
• Operating Current: Double Phase, Single Phase, Triple Phase
• Warrenty: 1year
• Temperature Capacity: High Temperature
• Puncture Voltage: 220V

• Warranty: 1 year standard warranty
• Weight: 1090gm/2.4lb
• Brand: Proceq

Scientific Instruments, vane shear test equipment, load frame apparatus

Digital Concrete Test Hammer, Material Testing Equipments

soil testing equipments

California Bearing Ratio Apparatus, Carbon Black Content Test Apparatus

Soil Testing Instruments, aggregate testing instruments

soil test equipment, core cutting machines, Material Testing Equipment

Rebound Hammer Testing Services, Cereals & Pulses Testing Services

Soil Testing Equipment, Material Testing Equipment

Automatic Compactor for Proctor & CBR Compaction, Erichsen Cupping Tester

automatic soil compactor, Digital Humidity Indicators / Controllers