Civil Engineering Test Equipment Dealers in Patel Nagar, Delhi

GLOW WIRE TEST APPARATUS  is intended for testing the flammability and ignitability of components and materials. This equipment is designed as per requirement of IEC:60695-2-10, IEC:60950-1, IEC:60335-1, IEC:60884-1, IEC:60238, IEC:60695-2-11, IEC:60695-2-12, IEC:60745-1, IEC:60400, IEC 60730-1, IEC:60598-1, IEC:61050, IEC:60320-1, IEC:61058-1, IEC:60742, IEC:60669-1, UL 746A, BS EN 60695-2-1, BS 6458, NF C20-921-1, IS:11000, ASTM D 6194-03 ‘Fire” hazard testing- part – 2 test method section 1, Glow wire test and Guidance.Nickel / Chromium (80: 20) Glow Wire, 4 m.m. in diameter, as per standard. Apparatus Glow Wire Test Apparatus consists of fine wire thermocouple, 0.5 mm diameter Cr/Al OR 1.0 mm Sensing Thermocouple. Sensing Thermocouple is also being supplied as per ASTM D 6194 for measuring the temperature of the Glow Wire. The equipment is simulated thermal stresses that are produced by sources of heat or ignition for short periods. When insulation is subjected to abnormal condition & can become a fire hazard. Fully Automatic Glow Wire Tester Besides the Conventional Glow Wire Test Apparatus a new model with complete automated Glow Wire Tester having touch screen and complete PLC control and monitoring for Time, Flame time, Force, Current and Exhaust time etc is also designed by Sensors India. The testing device consists of a loop of resistance wire, electrically heated to the for high temperature specified for the relevant standards and maintained under specified pressure & time. A PID digital temperature indicator with controller. The range of this control is 1000 Deg C. An auto current source use also provided with a CT operated ammeter, which is capable of delivering up to 150A for heating in loop. Besides that moving specimen holder trolley is pre-loaded with a force of 0.8 to 1.2 N against Glow Wire. Mechanical stopper limits movement of the tip of The Glow Wire in to the specimen to maximum permitted with scale to measure penetration depth. Digital timer for application and flame time adjustable clamp for holding the specimen under test & Scale for measuring flame height is also provided. Our apparatus provides excellent temperature control.

Owing to our rich industry experience and knowledge in this domain, we have become an eminent Double Ring Soil Infiltrometer manufacturer, supplier and exporter. This laboratory instrument is widely used to determine the infiltration rate of water into the soil and the rate is determinate as the amount of water per surface area and time unit that penetrates the soils. Our well equipped infrastructure unit helps us to ensure prompt and hassle-free production of this Double Ring Soil Infiltrometer.

• Integral type proving Ring capacity: 3000Kgs
• A dial gauge: 0.01 x 25mm.

Originally developed by Bruce Marshall, a highway engineer in U.S.A later on standardized by ASTM. Generally the test is applicable to hot mix designs using bitumen and aggregates upto a maximum size of 25mm. In this method, the resistance to plastic deformation of cylindrical specimen of bituminous mixture is measured when the same is loaded at periphery at 5cm per min. This test procedure is used in designing and evaluating bituminous paving mixes. The test procedure is extensively used in routine test programmers for paving jobs. There are two major features of the Marshall method of designing mixes namely. a) densityvoids analysis, b) Stability-flow tests. The Marshall stability of mix is defined as a maximum load carried by a 0 compacted specimen at a standard test temperature of 60 C. The flow value is deformation the Marshall test specimen at under goes during the loading upto the maximum load, in 0.25 mm units. In this test and attempt is made to determine optimum binder content for the type of aggregate mix and traffic intensity.

Automatic Digital Bitumen Penetrometer-VSLIC4038 The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free guidance of the plunger which virtually eliminates friction during the test.Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, the needle position can be finely adjusted by using the joystick located on the front panel. A magnifying glass and an ultra- bright LED lamp are supplied to assist the operator; the plunger is then automatically released onto the sample and raised automatically after the testing period. The test result is displayed on the digital display. The plunger can easily be removed to calibrate its weight.A water bath and a thermometer (IP38, ASTM 17C or 63C) required for the test are ordered separately. The Automatic Electronic Penetrometer is supplied complete with;Penetration Needle, 1 pieceTransfer DishSample Cup, Ø 55×35 mm, 6 pieces, stainless steel Technical Specifications Measuring Range: 0-50 mm Resolution: 0.01 mm Test Load: 100 g (plunger 97.5 g + 2.5 g penetration needle) Test Time: 5 seconds (adjustable from 0.1 to 9999 sec.) Dimensions: 270x480x750 mm Weight (approx.): 24 kg Power: 75 W Automatic Digital Bitumen PenetrometerAutomatic Electronic Penetrometer is used for determination of the needle penetration according Before each start of the test the measuring system automatically resets, and then the penetration needle moves down to the sample by using the electric drive, Automatic Digital Bitumen Penetrometer Summary The Automatic Electronic Penetrometer is used for determination of the needle penetration according to EN 1426, ASTM D5 and AASHTO T49 standards. The penetration depth of the needle is determined with a pulse type electronic measuring system, which is separated from the plunger during the test, this allows the free guidance of the plunger which virtually eliminates friction during the test.

We are connected with well-known transport providers to make sure the distribution of deliveries is done out without a problem and on time. We own a substantial warehouse to keep the stacked products safely until final dispatch. With the leading technologies and automated systems, we ensure that the fragile products are sternly packed and piled up systematically.   Product Code : EKE 550-1It consists of : EKE 552-1 Marshall Load Frame cap 25 KN, single speed, 50.8mm / min. 1 No. EKE 55001 Breaking Head Stability Mould, with a dial gauge EKE 072 (having 25 mm travel and 0.01 mm least count), for flow measurement 1 No. EKE 55002 Compaction Mould, Steel, cylindrical 3 Nos. EKE 55003 Base Plate 3 Nos. EKE 55004 Extension Collar 3 Nos. EKE 55005 Compaction Pedestal, Manual Operation, comprising a Steel Plate capped on a wooden post. A Mould Clamp is fitted to the top of the plate 1 No. EKE 55006 Compaction Hammer, for use with Compaction Pedestal and Mould, weight 4.5 kg with a free fall of 457 mm 2 Nos. EKE 55007 Load Transfer Bar 1 No. Essential Accessory EKE 271 Proving Ring, capacity 25 kN (2,500 kgf) EKE 55020 : Electronic Conversion Kit for Marshall Apparatus EKE 550 Marshall Apparatus with two speeds - 50.8 and 61 mm per minute is also available on request.

• Brand Name: AMK

This unit consists of a cabinet which houses the gear system and motor mounted on a sturdy angle iron base. The loading is done through the bottom loading plate which is carried on a lead screw. The advancement of this lead screw is secured against rotating by a sliding key. The top bracket is adjustable in height and carries a hexagonal adaptor for taking standard proving rings. The instrument is fitted with a motor operation on 220230 volts, single phase, 50 cycles A.C. supply.This is for evaluating the strength of soil on field exploration or construction site and in the preliminary laboratory studies.It gives directly the unconfined strength.

Located in Delhi, India, we are counted amongst the prominent Manufacturers, Exporters and Suppliers of Direct Shear Apparatus. Intricately designed using high-quality raw material under the guidance of our experts, the Direct Shear Apparatus we make available are high in demand in the international market. They functional smoothly and have robust construction and high durability. For price quotes, stay assured to get what’s the best in market. Highlights : The apparatus consists of : - EKE 10401 Shear Box Assembly Comprises of Type of Shear : Direct/Residual measurement Operation : Motorised Rates of Strain : 1.25, 0.625, 0.25, 0.125, 0.05, 0.025, (mm/min) 0.01, 0.005, 0.002, 0.001, 0.0004, 0.0002 Specimen Size : 60 x 60 x 25mm Power Specifications : 220 V, 50 Hz, Single Phase, AC supply

We provide with a Soil Testing Apparatus called California Bearing Ratio Apparatus. Veekay Industries is known for creating efficient California Bearing Ratio Apparatus for determining the relative rate of bearing ratio of a soil and also the surcharge weight of base and sub base. Test can be conducted on soils including gravel, sand and washed stone. The CBR test is utilized for selecting materials and control of sub grades. Procedure Loading soil with a circular piston, 50 mm dia face and maintaining a penetration rate of 1.25 mmmin. The load is noted and the results of test on natural or recompacted soils, in soaked and unsoaked conditions, can be compared with standard test results. Features California Bearing Ratio Apparatus consist of a circular pistonCalifornia Bearing Ratio Apparatus works in both soaked and un-soaked conditions The test can be executed on recompacted as well as natural soilsManufactured with great care, by following strict quality guidelines

Product Code: EKE 125 Standrad: Standards IS:2720 (Part 15), IS:12287, BS:1377, ASTM D2435   The standard outfit comprises of a fixed ring type of consolidometer cell for testing specimens of 60 mm dia x 20 mm thick, but the unit is so designed that specimens of varying sizes from 50 mm dia to 100 mm dia can also be tested. Besides, the same loading unit can be used with floating ring consolidometer cells, which can be supplied at extra cost.The standard outfit is supplied with a set of weights to give a total pressure of 10 kg/cm² (besides a seating load of 0.05 kg/cm² on the specimen), but an additional set of weights are required to reach the full capacity of 20 kg/cm².The necessary accessories to perform the permeability test of the 'Varying Head' type can also be provided at extra cost. Electronic Measurement System Digital readout reduces the possibility of operator errorDirect reading in mmPlug-in transducer module systemFacility for connecting readout unit to compatible logging or printing systemElectronic sensing parts are easy to couple with existing ENKAY Models Electronic measurement of the vertical consolidation of soil specimen, using a displacement transducer connected to a precalibrated readout unit, offers an operator all the advantages of digital display without the errors which can occur when reading conventional dial gauges.The basic equipment for monitoring a test comprises a readout unit and one transducer module for connection to one consolidation frame. Consolidation is measured by mounting the transducer in the same position as a conventional dial gauge. The movement of the transducer stem acts in exactly the same way as would the dial gauge spindle and is converted into an electrical signal. The signal is then displayed in true engineering units on the readout unit. For three gang unit or six gang unit, 3 or 6 transducer modules are used, but the readout unit is of three or six channel type. The constituents of various models are detailed in the table given on the next page. Consolidation of clay deposits leads to distress in buildings such as cracks and failures. Consolidation is the reduction of volume of soil due to expulsion of water from its pore space caused by sustained loading

It is used for finding out the rate of hardening of mortar sieved from concrete spring and a stem graduated from 0-70 kg x 1 kg. Six interchangeable penetration needles of areas 645, 323, 65 32 and 16 mm sq. is provided . The penetration resistance is measured by the force exerted to penetrate the mortar by 25 mm and is indicated by a sliding ring on the stem, which is graduated. Needle shanks are marked at every 12.5 mm. Supplied complete in a wooden carrying case.

It will consist of metallic cone with half angle of 15' -30 ±15' and 30.50mm coned length. It will be fixed at the end of a metallic rod with a disc at the top of the rod so as to have a total sliding weight of 148± 0.5 gms. The total rod shall pass through two guides. (to ensure vertical movement) fixed to a stand. Suitable provision will be made for clamping the vertical rod at any desired height above the surface of the paste in the trough. A brass trough 50 mm internal diameter and 50 mm depth will be provided as per IS specification resting on M.S.bars. Ground Glass: 10mm thick and about 45 cm square or larger rough glass as per IS 2720 (Part V-1985) for mixing soil and water Spatula: Flexible with blade about 8 cm long and 2 cm wide made from stainless steel material as per IS: 2720 (part V-1985) Evaporating dish: Made from porcelain material having diameter of about 12 to 15 cm with smooth surface as per IS 2720 (part V-1985)

Located in Delhi, India, we are actively functioning as a proficient Manufacturer, Exporter and Supplier of Slump Cone Apparatus all over the globe. The Slump Cone Apparatus is comprehensively used to calculate the workability of concrete. Our Slump Cone Apparatus is offered along with base plate & tamping rod, which is 16mm dia. & 60cm long. It comprises of Slump Cone of 20cm bottom dia. & 10cm top dia. Order retail or bulk, timely delivery is guaranteed!

• Material: Steel, Granite
• Size: 38 mm
• Resolution: 0.001 mm

We are one of the prominent concrete permeability manufacturers, exporters, and suppliers, based in india. The direct shear test is carried out with an apparatus consisting of a square divided into two halves. The specimen, contained in the box, is subjected to a constant normal load while an increasing horizontal force is applied to one of the section of the shear box. This force causes a shear failure along the junction between the box sections. The shear force and the normal load are measured directly. The rate of strain is adjusted by the speed of the horizontal force applied. The loading unit has v-strips on which the shear box housing rests. Our direct shear machine is suitable for specimens of size 60 x 60 x 25mm. ref. Standard is:2720 (part 13), bs 1377, astmd 3080 ordering information concrete permeability apparatus, 3 cell model for 100mm cubeconcrete permeability apparatus, 3cell model for 100mm cylinberconcrete permeability apparatus, 3cell model for 150mm cubeconcrete permeability apparatus, I cell model for 150mm cubeconcrete permeability apparatus, 3cell model for 300mm cylinberconcrete impermeability apparatus, 3cell model for 150mm cube as per dlnstd to enquire about the desired product(s), just check the box and then click �inquiry now� button which is provided below.

Like Standard Penetrometer we also master in making Automatic Standard Penetrometer. We Manufacturer Automatic Standard Penetrometer with transistorized timer and Electro magnet incorporated in the clutch mechanism to accurately control penetration time to exact five seconds

• Material: Mild Steel
• Impact Energy: 0.833 Nm (0.614 lbf)
• Weight: 3.45 kg (7.60 lb)
• Brand: Proceq
• Hammer mass: 665 g (1.47 lb)
• Hammer head diameter: 8.0 mm (0.315")
• Operating temperature: -10 to 50 Deg C
• Dimensions of housing: 230 x 60 x 200 mm
• Measuring range: 145 psi -725 psi
• Model Number: OS-120

• Voltage: 220 V
• Surface Treatment: Paint Coated
• Usage/Application: Industrial
• Material: Mild Steel
• Frequency: 50Hz
• Operating Mode: Semi Automatic
• Display Type: Digital
• Capacity: 30 KN

• Type: Lump Test Apparatus
• Certification: ISO 9001:2008
• Color: Grey
• Voltage: 110V, 220V, 380V
• Condition: New
• Power: 1KV, 2KV
• Warranty: 1yrs
• Temperature: 0-50°C
• Vacuum range: 150-300mm

We are the main supplier of this product.

A prominent supplier of huge range of Direct Shear Apparatus.

We are counted amidst the celebrated suppliers of Cement Testing Equipment and known for offering the best deals. Based in Rudrapur(India), We marked our presence in the nationwide market since our products are qualitative and cost effective.

California Bearing Ratio Apparatus, Digital Humidity Indicators / Controllers

Digital Concrete Test Hammer, Material Testing Equipments

Scientific Instruments, vane shear test equipment, load frame apparatus

concrete permeability test equipment, compressor testing machine

Asphalt Testing, filtration, liquid handling products, petroleum testing

Cement Testing Equipment, Soil Testing Equipment, Concrete Testing Equipment