Civil Engineering Test Equipment Dealers in Rani Bagh, Delhi

• Country of Origin: India
• Type: Automatic
• Certification: CE Certified
• Application: Industrial
• Weight: 10-20kg
• Voltage: 220V
• Warranty: 1 Year

The procedure, as recommended in various standards, is for determining the quantity of water required to produce a cement paste of standard consistency. The standard consistency is attained when the 10 mm plunger of the apparatus penetrates the material to a pre-determined depth under free-fall. A new sample is prepared and tested with initial and final needles in accordance with the procedure described in various specifications. Vicat Apparatus consists of a frame bearing a movable rod with a cap at top and a vicat mould in the form of the frustum of a cone, (80+5)/70 + 5mm dia at the base,(70mm+5mm) /60 mm at the top and 40 mm high, and with a glass base plate of minimum 2.5 mm thickness with various models of Vicat apparatus.

We have invested a large amount for developing all-the-in-house storage facility that is managed and maintained by our diligent professionals. Also, it keeps us free from stock-out situations. Buyers can approach us, if looking for obtaining first-class products in Delhi(India). Hydraulic penetrometer is a simple tool allows you to observe the degree of soil compaction at depths from 0-18 inches (0-45 centimeters).

Method to determine the resistance of geosynthetics to penetration by steel cone dropped from a fixed height, as a simulation of dropping sharp stones on their surface. Generally applicable to all geosynthetics. However, the test principle may not be applicable to some types of products. The specimen is clamped between two steel rings. A steel cone (45° tip angle, 1000 g) is dropped from a height of 500 mm onto the centre of the specimen. The degree of penetration is measured by insertion of a graduated cone into the hole.

SAT-1302 is suitable for all kinds of sealing tape, sealing tape, warning tape, carpet tape, electrical tape, protective film tape, wrapping tape, cutting tape, etc., as well as medical patches, adhesive labels, protection Film and other products, hold the stickiness test.

• ROLLER SIZE: 230mm
• CONTROLS: Analog
• NO. OF ROLLERS: 4
• SPEED: 33rpm(Approx)
• MAXIMUM LOAD: 5 test tubes
• TIMER: No
• POWER SUPPLY: 230V ± 10%  AC 50Hz

Blood roller mixer is used in mixing of viscous substances and blood samples and it is also used in counting platelets.   SALIENT FEATURES Rocking and rolling action for complete Mixing Four roller design with small footprint Designed for continuous quiet operation Ambient temperature range +4° C + 60° C

Flocculator is used to determine the percentage of the polymer in the water sample. It has gained common application in waste water treatment plants.

The California bearing ratio (CBR) is a penetration test for evaluation of the mechanical strength of road sub grades and basecourses. The test is performed by measuring the pressure required to penetrate a soil sample with a plunger of standard area. The measured pressure is then divided by the pressure required to achieve an equal penetration on a standard crushed rock material.

• Features: Non corrosive, High tensile strengths , Strong construction

Portable Falling Weight Deflectometer   Loadman-II    This is a light portable device for the measurement of Deflections. The device is easy to handle and can be used on all construction sites and all materials under any condition. It makes possible to measure bearing capacity and compaction ratio of construction layers and constructions in places where other measuring devices cannot be used owing to their size or because of the necessity to use a lorry or a van as a weight and or transportation unit. LOADMAN is also provided with an internal memory and with a keyboard. The data can be transferred to PC via USB connection.   Measuring principle   The deflection caused by the load of a falling weight is measured by an accelerometer. The acceleration is double integrated and thus the deflection can be calculated. The measuring results are given as the maximum deflection, the calculated bearing capacity modulus E, the length of the loading impulse and the percentage (approx.) of the rebound deflection compared to the maximum deflection as well as the compaction ratio, that is the ratio of the second and further on deflections compared to the first measured deflection (effectiveness of compaction).   Range of use Technically the device can be used on practically all kinds of construction sites to measure bearing capacity and for compaction control on bound, unbound, and special layers; for example, on roads, streets, bridge sites, house building sites, in trenches, on sports fields (football, baseball, tennis, golf, athletics etc.) as well as for laboratory tests of various kinds of materials.   Specificatons Total weight: 16 kg Height:117 cm Diameter: 13 cm Diameter of loading plate(s): 132 mm, 200 mm and 300 mm (option) Falling weight: 10 kg Falling height: 80 cm Operating voltage: 27 V (3 × 9V batteries) Measuring range: 0.1-5 mm approx. Length of loading/unloading impulse: 25-30 ms approx.

Point Load Index Tester, is used for determining the Diametral Point Load Strength Index of rock cores and irregular lumps which can be tested without any treatment. The Point Load Test is primarily an Index Test for strength classification of rock materials. This instrument is mainly intended for field measurements on rock specimen but it can also be used in the laboratory. The results of the test may also be used to predict the uniaxial compressive strength of rock from correlations. The apparatus is light and portable. It can be used in the laboratory as well as in the field.   Salient Features:   Rock core specimens can be tested without any preparation. The results of the test may also be used to predict the uniaxial compressive strength of rock. With this instrument, a wide range of core sizes can be tested. The frame has adequate adjustments to align perfectly the loading axis passing through the centre of the bearing plates and Loading

We are offering concrete test hammer. The concrete test hammer is an instrument which is easy to use, for quick and approximate measurement of the resistance to pressure of manufactured concrete products. The principles on which it works are based on the rebound impact of a hammer on a piston which rests against the surface of the concrete products. The greater the resistance of the concrete, greater is the rebounded impact.

• Brand Name: Teleflex
• Display Type: Analogue
• Hardness: 50-55 HRC
• Tensile Strength: 440 MPa

• Feature: Accuracy, Digital Display, Easy To Carry

Rebound Hammer, pile integrity tester, rebar detector, analyzer

Bulk Density Meter, pressure recorders, dew point transmitters

Fume Hood, Laminar Air Flow Cabinets, Laboratory Refrigerators

Pile Integrity Tester- C312- ET, Bond Testers

Construction Testing Equipment

Fume Hood, Air Shower, Pass Box, Portable Clean Room

Falling Weight Deflectometer, Solar Road Safety Products, Axle Load Services