Civil Engineering Test Equipment Dealers in Sarai Rohilla, Delhi

The set comprises of a cylinder capper, a cylinder carrier and a ladle. The cylinder capper consists of a base on which two accurately machined plates are mounted vertically. One plate is firmly fixed and the other one is adjustable horizontally. Two plates are provided with holders for holding the cylinder in position. The holder are split and the bottom half of each holder is fixed firmly and the top half of each is removable and bolted down to the lower half. On the upper parts of the vertical plates 'V' s are provided for pouring the capping compound. Two spacers are also provided. Complete with cylinder carrier and ladle for molten compound.

• Weight: Approx 3kg
• Frequency: 50 Hz
• Material: Cast Iron
• Display: Analog
• Angle: 30 Degree
• Supply: Ac Supply

Our company name figures among top-notch Manufacturers, Exporters and Suppliers of Cone Penetrometer in Delhi, India. Our Cone Penetrometer always complies with industry standards and features longevity, high grade and pocket friendly prices. The Vicksberg Penetrometer that we bring forth is a Simple and light instrument used for measuring static penetration resistance. Buyers can acquire it custom-built specifications, from us. More about Cone Penetrometer : The thrust force is provided directly by the operator who, by pushing on the T handle, forces the cone into the soil. The encountered resistance is measured on the fitted load ring. Testing is only possible in soils with good consistency and for short depths.Specifications:- 1 cones with 30o cone angle  2 KN (200 kg f) load ring  Road length 45 cm.

• Material: Steel
• Application: Concrete Testing
• Brand Name: Steco
• Voltage: 220 V
• Frequency: 50/60 Hz
• Grade: Semi-Automatic
• Strength: 100-700 Kg/cm

• Brand Name: AMK

This unit consists of a cabinet which houses the gear system and motor mounted on a sturdy angle iron base. The loading is done through the bottom loading plate which is carried on a lead screw. The advancement of this lead screw is secured against rotating by a sliding key. The top bracket is adjustable in height and carries a hexagonal adaptor for taking standard proving rings. The instrument is fitted with a motor operation on 220230 volts, single phase, 50 cycles A.C. supply.This is for evaluating the strength of soil on field exploration or construction site and in the preliminary laboratory studies.It gives directly the unconfined strength.

Plummet Balance, which is provided by our manufacturing unit, is known to be made by adhering to strict quality and industrial standards. The Plummet Balance method is used for analyzing the size of sub sieve particle in a range, which is highly rapid. The Plummer Balance, provided by our manufacturing unit is known for sinking to specified depths and giving the reader accurate readings. Specifications Conventionally particle size distribution analysis is carried out using pipette and hydrometer methods. Whereas in hydrometer method it is possible to determine particle sizes in the range 75microns, the method involves computation and it is time consuming. The pipette method can be used for determining only the percentage of specific sizes less than 0.02, 0.006 and 0.002mm as a percentage of total soil sample. The percentage of soil in suspension is directly indicated by a pointer over a graduated scale. A vertical rod is mounted on a sturdy base having leveling screws. A pointer with steel pivots turns is jewel bearing an moves over a graduated scale. Scale graduations are market 0-100% x 2% To the other end of the pointer a plummet is hanged. Rack and pinion arrangement is provided on the vertical rod for adjusting the height. Supplied with a chart showing relationship between “K” and temperature of suspension of soils of varying specific gravity from 2.4 to 2.8 to help in solving stroke's equation. Supplied complete with one Perspex plummet one measuring jar and one rider weight for zero adjustment and rider weight for adjusting the pointer to 100%. Features Of Plummet Balance The Plummet Balance manufactured by us complies to the standard- ASTM D 2419, AASHTO T 176It is durableDiscounted rate

KEWIL Ring and Ball Apparatus Ring and ball apparatus is meant for determining soft point of bitumen. Using various scientific principles it is also used in petroleum industry, construction projects, paint industry etc.

• Weight: Approx 5kg
• Material: Mild Steel
• Product Type: Point Apparatus
• Power Source: Electricity
• Height: Approx 2fts

With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande grooving tool, one ASTM grooving tools and a height gauge block. Hand operated, with counter. As per IS: 2720 (Part-V), IS : 9259, BS : 1377, AS : 89 With consists of a brass cup held on an adjustable bracket. The bowl can be adjusted for a fall raised & dropped on a rubber of standard hardness by cam action. Complete with one casagrande-grooving tool, one ASTM grooving tools and a height gauge block. With counter. Fitted with a motor geared down to give approximately 120 RPM. Suitable for operation on 230 Volts, single phase, 50 cycles, A.C. supply.

We Manufacturer , Supplier & Exporters of wide range of Centrifuge Extractor. The Hand Operated Centrifuge Extractor, manufactured and supplied by us, is an instrument that is used for determination and checking of bitumen percentage in bituminous mix which is added with solvent and dissolved bitumen is removed by centrifugal action. Hand Operated Centrifuge Extractor manufactured by us consists of a removable aluminum rotor bowl, capacity 1500 gm with a cap and tightening nut.

• Type: Soil Testing Equipment
• Certification: ISO 9001:2008
• Weight: 10-50kg
• Voltage: 110V, 220V, 380V
• Application: Paper Testing
• Power: 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year

We are the main supplier of this product.

• Material: cast iron
• Size: 38 mm
• Diameter: 16 mm dia. x 600 mm

GLOW WIRE TEST APPARATUS  is intended for testing the flammability and ignitability of components and materials. This equipment is designed as per requirement of IEC:60695-2-10, IEC:60950-1, IEC:60335-1, IEC:60884-1, IEC:60238, IEC:60695-2-11, IEC:60695-2-12, IEC:60745-1, IEC:60400, IEC 60730-1, IEC:60598-1, IEC:61050, IEC:60320-1, IEC:61058-1, IEC:60742, IEC:60669-1, UL 746A, BS EN 60695-2-1, BS 6458, NF C20-921-1, IS:11000, ASTM D 6194-03 ‘Fire” hazard testing- part – 2 test method section 1, Glow wire test and Guidance.Nickel / Chromium (80: 20) Glow Wire, 4 m.m. in diameter, as per standard. Apparatus Glow Wire Test Apparatus consists of fine wire thermocouple, 0.5 mm diameter Cr/Al OR 1.0 mm Sensing Thermocouple. Sensing Thermocouple is also being supplied as per ASTM D 6194 for measuring the temperature of the Glow Wire. The equipment is simulated thermal stresses that are produced by sources of heat or ignition for short periods. When insulation is subjected to abnormal condition & can become a fire hazard. Fully Automatic Glow Wire Tester Besides the Conventional Glow Wire Test Apparatus a new model with complete automated Glow Wire Tester having touch screen and complete PLC control and monitoring for Time, Flame time, Force, Current and Exhaust time etc is also designed by Sensors India. The testing device consists of a loop of resistance wire, electrically heated to the for high temperature specified for the relevant standards and maintained under specified pressure & time. A PID digital temperature indicator with controller. The range of this control is 1000 Deg C. An auto current source use also provided with a CT operated ammeter, which is capable of delivering up to 150A for heating in loop. Besides that moving specimen holder trolley is pre-loaded with a force of 0.8 to 1.2 N against Glow Wire. Mechanical stopper limits movement of the tip of The Glow Wire in to the specimen to maximum permitted with scale to measure penetration depth. Digital timer for application and flame time adjustable clamp for holding the specimen under test & Scale for measuring flame height is also provided. Our apparatus provides excellent temperature control.

• Country of Origin: India
• Certification: CE Certified
• Weight: 100-500kg
• Color: Brown
• Voltage: 220V
• Driven Type: Electric
• Warrenty: 1year
• Type: Digital CBR Testing Machine
• Power: 3-5kw
• Brand Name: U Test
• Application: Industrial

Split Tube Sampler or Split Spoon Sampler is designed to take undisturbed soil samples using the drive weight method as per BS 1377. The split tube section is held together with a ball check valve head and a heat treated drive shoe.

soil testing instrument, Aggregate Stones, Cement, Testing Instrument

Concrete Testing Equipment, Soil Testing Equipment, Cement Testing Equipment

Liquid Limit Apparatus, automatic soil compactor

concrete permeability test equipment, compressor testing machine

Ultrasonic Pulse Velocity Tester, Hardness Software, Abrasive Cut Off Wheels

Two Hinged Arch Apparatus, Pocket Weather Meter, Tilting Level