Coated Films Dealers in Delhi

For meeting the diverse requirements of our clients, we are engaged in offering a supreme quality Lacquer Coated Film. For manufacturing this film, our highly skilled professionals use the best quality raw material and progressive technology. These lacquer coating films find application in metallic yarn, glitter powder, and decoration. Also, these films are extensively used in the garment and textile industries for performing embroidery. Further, these offered films are quite reasonably priced and have a long life.

High performance coating facility from K-MEC enhances JPFL’s capability to produce entire range of coated BOPP and PET films as well as development of new coatings for different applications and tailoring the products as per customer’s requirement. Our products can be used as monofilm or as a part of laminate structure. PVdC & AlOx coating enhance the moisture, gas and aroma barrier of the film whereas acrylic coating facilitate printability, sealability and seal integrity of the film.     The main features of our Coated Films are : Solvent Free coatings Excellent Optics Good Barrier - Moisture, Oxygen, Aroma, Gases Good Printability Heat Sealable Good Machinability Excellent consistency Low Temperature Seal, and High Seal Integrity coatings.

SSPARSHPET-CCC is Transparent film with one side plain surface and other side Co-polyester based coated: CCCI as for inside Coated and CCCO as for outside Coated film. The film possesses good thermal, mechanical, optical and surface properties along with excellent transparency and dimensional stability. Applications Co Polymer based chemically coated Polyester film suitable for printing, metalizing, coating & Improved bond strength in flexible packaging applications.

• Type: COATED FILMS
• Material: Polyester
• Application: Metallic yarn
• Model Number: CPF
• Lead Time: 21days
• Port: Nhava sheva
• Supply Ability: 10000 Ton/Tons per Month
• Place of Origin: Delhi, India
• Feature: Moisture Proof
• Hardness: Rigid

• Color: Black
• Material: Coated
• Usage/Application: Commercial
• Size: Customized
• Total Solar Energy Rejected: Standard

We offer an advanced coating technology to produce a two-layer PVDC coated PVC structure which offer medium barrier protection against moisture and gas. Characteristics:   Good water vapour and oxygen barrier Cost-effective high barrier blister film Excellent process ability Excellent lay-flat properties Enhanced machine performance Runs on all standard PVC-tooling Higher Yield Higher bond strength between the layers   Application   This structure is ideal for thermoformed blister packaging of pharmaceutical tablets & capsules..  

Good aroma, oxygen and moisture barriers properties, Excellent dimensional stability and stiffness, Low seal threshold on acrylic side.

• Thickness: 12 micron
• Application: for lamination with board.
• Yield: App. 52 Sq. Meter Per kg. in 12 micron
• Coating: On metalised and holographic side
• Colour: Normally it is silver color. Any color can be given as per customer requirement. For color minimum quantity 200 Kgs.
• Core ID: 3 inch
• Size: We keep in stock 760 mm . We can cut it according to the requirement of the customer but customer should buy full width.
• Other: Coated side is to be printed and film side to be laminated with board. Coated side can be ascertained by rubbing on the ground or scratching with blade.

Printing The coating will enhance the bonding with ink. The advantage of using coated polyester is to avoid oxidisation . As the metallized film contains aluminium and when it will come in contact with moisture it will become oxide. The best printing method is UV. Small qty can be produced on Offset by using polybond ink and paying special attention on drying. Special care should be taken on stacking so that the ink is not transferred. Besides general pattern Hologram can be made in customized pattern. Hologram Hologram effect can be one D, Two D, Three D, Dot matrix, Digital and Kinetic or combination of these.

As a part of the forward integration of BOPP and PET Films, JPFL installed one coating lines for manufacturing of entire range of specialty coated films like PVdC, Acrylic, Low Temperature Seal and High Seal Integrity coatings. The main features of our Coated Films are : Solvent Free coatings Excellent Optics Good Barrier - Moisture, Oxygen, Aroma, Gases Good Printability Heat Sealable Good Machinability Excellent consistency Can be used as Monofilm or part of Laminate structure PVdC coating enhance the moisture, gas and aroma barrier of the film where as acrylic coating facilitate printability, sealability and seal integrity of the film. State of the art high performance coating facility from K-MEC enhance JPFL’s capability to produce entire range of coated BOPP and PET film as well as development of new coatings for different applications and tailoring the products as per customer’s requirements.

Alox coating is the application of a thin and highly transparent coating of aluminium oxide on packaging films that gives the materials extremely high moisture and gas barrier properties that rival those of aluminium foils and metallised films. It is the only truly high-barrier flexible packaging material available that is transparent and allows the packaged product to be clearly visible. This not only provides a big marketing plus but also facilitates operations like optical scanninginspection and metal detection during and after the packaging process, something that is not possible with aluminium foils or metallised films. The levels of barrier available from alox coated films are far superior to those provided by other transparent flexible packaging materials like pvdc-based structures and evoh coextrusions. Furthermore, moisture and gas permeabilities are not affected by high levels of temperature or relative humidity and are independent of the base film thickness thus enabling maximum downgauging of packaging materials. An important feature of alox coated films is that they are microwavable, which aluminium foils and metallised films are not. As they can be retorted as well, this makes them ideally suited for the packaging of processed foods that can be microwave heated or cooked in the pack itself before consumption. alox coating is cutting edge technology and only a very select handful of film manufacturers are equipped with alox coating capabilities.

coated film, Lamination Films, lamination foils, Lamination Rolls

coated films, Pet Films, Bopp Films, Non Woven T-Shirt Cut Bag

pvdc coated film

sugar coated film, coated chewable tablets, Pharmaceutical Dry Syrup

double coated film, rexine cloth, printed pvc film rexine cloth

coated polyester film, coated film, tracing film, regular stamping foil

coated films, coated polyester film, Polyester Film Tape

coated polyester film

coated films, Pet Films, Bopp Films, Metallized Films