Compressed Air Dryer Dealers in Bawana, Delhi

• Capacity: 10 CFM to 1000 CFM
• Weight: 150Kg
• Material: MS
• Brand Name: Compet
• Drying Capacity (in cfm): >1000 cfm, 21 - 50 cfm, 121 - 500 cfm, 51 - 120 cfm, 501 - 1000 cfm
• Minimum Output Dew Point (in C): -30 C, -20 C
• Dryer Horse Power (HP): 2 HP, 10 HP, 20 HP, 1 HP, 5 HP, 15 HP
• Frequecy: 50-60 Hz
• Finish: Color Coated

We are one of the leading Manufacturers & Suppliers of Refrigerated Air Dryers. The Refrigerated Air Dryers are fabricated by our engineers using cutting-edge technology and superior quality parts and components. The Refrigerated Air Dryers supplied by are robustly constructed, sturdy, efficient and durable. Clients can avail quality tested and highly functional Refrigerated Air Dryers from us at competitive prices. Construction & Working : The basic principal of operation of the Refrigerated Air Dryer is the removal of moisture by cooling air to certain preset temperature. The air entering the system enters into the precooler. A Precooler is a heat exchanger where the incoming hot air is being cooled by the outgoing cold air so as to reduce the heat loads for the evaporator and thereby the refrigeration system. When the air is cooled, i.e., when the heat is removed from the air, the water vapour will get condensed. It is easy to remove the moisture as a condensate than the moisture in water vapour state. The air from the precooler enters into the Evaporator. In evaporator the cooling, heat removal is done by the boiling refrigerant requires heat to boil. This heat is evolved from the air. Air is cooled to 2 o 4 c. When the temperature drops, the moisture turns to condensate moisture is a form of water. The air with condensate enters into moisture separator where the moisture is removed with the help of auto drain centrifugal action of air during the centrifugal passage of air, moisture being the denser medium. The refrigerant circuit consists of a compressor, a condenser, a filter dryer, expansion valve or a capillary tube and an evaporator. The low temperature refrigerant vapour enters the compressor. Compressor rises the pressure of the refrigerant. Also the temp of ref. gas. The hot, high-pressure refrigerant enters into the condenser. In the condenser, heat is removed from the refrigerant by circulating cold air using the Fan. The low temperature, high-pressure liquid enters the filter dryer, where the dirt contents are removed. The refrigerant, then passed into the expansion valve, The temperature of the refrigerant leaving the expansion valve will be – 1 C, This low-pressure liquid refrigerant enters the evaporator. In the evaporator, the refrigerant boils and becomes low-pressure vapour. The Vapour enters the compressor and the cycle continues.

• Capacity: 2 NM3/hr to 5000 NM3/hr
• Dew Point: -40oC to -80oC
• Operating Pressure: 8 Kg/cm2g

Working   Heatless Desiccant Air Dryers remove water vapor from compressed air through a process known as Pressure Swing Adsorption.A solid state controller automatically cycles the flow of compressed air between the towers, while the "online" tower is drying, the "offline" tower is regenerating. Regeneration, sometimes referred to as purging, is the process by which moisture accumulated during the "online" cycle is stripped away during the "offline" cycle. As dry low pressure purge air flows gently through the regenerating bed, it attracts the moisture that had accumulated on the surface of the desiccant during the drying cycle and exhausts it to the atmosphere. Our offered Heatless Adsorption Air Dryer is acknowledged among our clients its compact design, low maintenance cost and robust structure.   Benefits   Due to its inherent simple design, investment in this type of dryer is the cheapest and the payback on this investment is very quick. Low temperature operation reduces corrosion in towers and desiccant lasts longer. Power requirement is 60 watts only for solenoid valves operation.    

Desiccant Type Air Dryer, Low Pressure Air Compressor